Subject Areas :

حسین مظاهری ¹ , محمود فاضل نجف آبادی ² , علیرضا اعلائی ³

1 - کارشناسی ارشد، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی
2 - استادیار دانشگاه پیام نور، بخش فنی و مهندسی، گروه مهندسی مکانیک، اصفهان
3 - استادیار، دانشکده مهندسی مواد، واحد نجف آباد، دانشگاه آزاد اسلامی، نجف آباد

Received: 2015-12-21 Accepted : 2015-12-21 Published : 2015-11-22

Keywords:

References:

 

[1]     S. Buytoz, M. M. Yildirim&  H. Eren, “Microstructural and microhardness characterstics of gas tungsten arc synthesized Fe-Cr-C coating on AISI 4340”, Materials Letters, Vol. 59, pp. 607-614, 2005.

 

[2]     V. Udhayabanu&  K. R. Ravi, “Synthesis of in-situ NiAl-Al₂O₃ nanocomposite by reactive milling and subsequent heat treatment”, Intermetallics, Vol. 18, pp. 353-358, 2010.

 

[3]     F. Madadi, F. Ashrafizadeh&  M. Shamanian, “Optimization of pulsed TIG cladding process of stellite alloy on carbon steel using RSM”, Journal of Alloy and Compounds, Vol. 510, pp. 71-77, 2012.

 

[4]     Y. C. Chen, “Reinforcements affect mechanical properties and wear haviors of WC clad layer by gas tungsten arc welding”, Materials and Design, Vol. 45, pp. 6-14, 2013.

 

[5]     Y. C. Lin & H. M. Chen, “Analysis of microstructure and wear performance of SiC clad layer on SKD61 die steel after gas tungsten arc welding”, Materials and Design, Vol. 47, pp. 828-835, 2013.

 

[6]     S. Buytoz & M. Ulutan, “In situ synthesis of SiC reinforced MMC surface on AISI 304 stainless steel by TIG surface alloying”, Surface & Coatings Technology, Vol. 200, pp. 3698-3704, 2006.

 

[7]     Y. C. Lin, “Microstructure and tribological performance of Ti-6Al-4V cladding with SiC powder”,Surface & Coatings Technology, Vol. 205, pp. 5400-5405, 2011.

 

[8]     O. Nuri Celik & M. Ulutun, “Effects of graphite content on the microstructure and wear properties of an AISI 8620 steel surface modified bytungsten inert gas (TIG)”, Surface & Coatings Technology, Vol. 206, pp. 1423- 1429, 2011.

 

[9]     ASTM A-106. Standard specification for seamless carbon steel pipe for high temperature service. USA: ASTM International, 2011.

 

[10] S. S. M. Tavares & J. M. Pardal, “Failure of ASTM A-106 Gr.B tube by creep and erosive wear”, Engineering Failure Analyses, Vol. 26, pp. 337-343, 2012.

 

[11] J. Lippold & D. Koteecki, “Welding metalurgy and weld ability of stanless stells”, John Wiley & Sons, New York, 2007.

 

[12] S. Buytoz, “Microstructural properties of SiC based hardfacing on low alloy steel”, Surface & Coatings Technology, Vol. 200, pp. 3734-3742, 2006.

 

[13] M. F. Buchely & J. C. Gutierrez, “The effect of microstructure on abrasive wear of hardfacing alloys”, Wear, Vol. 259, pp. 52-61, 2005.

 

[14] J. Majumdar, “Studies on compositionally graded silicon carbide dispersed composite surface on mild steel developed by laser surface cladding”, Vol. 203, pp. 505-512, 2008.

 

[15] R. Yang & Z. Liu, “Study of in-situ synthesis TiCp/Ti composite coating on alloy Ti6Al4V by TIG cladding”, Vol. 36, pp. 349-354, 2012.

 

[16] Y. C. Lin, “Elucidating the microstiucture and wear behavior of tungsten carbide”, Journal of Materials Processing Technology, Vol. 210, pp. 219-225, 2010.

 

[17] K. Amini & A. Akhbarizadeh, “Investigating the effect of the quench environment on the final microstructure and wear behavior of 1.2080 tool steel after deepcryogenic heat treatment”, Materials and design, Vol. 45, pp. 316-322, 2013.