Subject Areas :

نفیسه سادات مدقن ¹ , محمد مزینانی ²

1 - کارشناسی ارشد، مهندسی متالورژی و مواد، دانشگاه فردوسی مشهد
2 - دانشیار، گروه مهندسی متالورژی و مواد، دانشگاه فردوسی مشهد

Received: 2015-09-15 Accepted : 2015-09-15 Published : 2015-08-23

Keywords:

References:

[1]     Z. Razavi Hesabi, A. Simchi&  S. M. Seyed Reihani, “Structural evolution during mechanical milling of nanometric and micrometric Al₂O₃ reinforced Al matrix composites”, Sharif University of Technology, Materials Science and Engineering A, vol. 428, pp. 159-168, 2006.

[2]     Y. Saito, H. Utsunomiya, N. Tsuji & T. Sakai, “Novel ultra-high straining process for bulk materials-development of the accumulative roll-bonding (arb) process”, Acta mater, Vol. 47, PP. 579-583, 1999.

[3]     M. Alizadeh&  M. H. Paydar, “Fabrication of nanostructure Al/SiC composite by repeated roll-bonding (RRB) process”, Journal of Alloys and Compounds, Vol. 477, pp. 811–816, 2009.

 [4]     C. W. Schmidt, C. Knieke, V. Maier, H. W. Hopple, W. Peoukert&  M. Goken, “Accelerated grain refinement during accumulative roll bonding by nanoparticle reinforcement”, Scripta Materialia, Vol. 64, pp. 245–248, 2011.

 [5]     R. Jamaati&  M. R. Toroghinejad, “Manufacturing of high-strength aluminum/alumina composite by accumulative roll bonding”, Materials Science and Engineering A, Vol. 527, pp. 4146–4151, 2010.

 [6]     L. Cheng, T. Kiet&  D. Wexler, “Significant enhancement of bond strength in the accumulative roll bonding process using nano-sized SiO₂ particles”, Journal of Materials Processing Tech, Vol. 209, pp. 4830-4834, 2009.

[7]     M. Alizadeh&  M. H. Paydar, “Fabrication of nanostructure Al/SiC composite by accumulative roll bonding (ARB) process, Journal of Alloys and Compounds”, Vol. 492, pp. 231–235, 2010.

 [8]     K. Charles, W. Zhirui&  K. Suk-Bong, “Mechanical behavior and microstructural evolution upon annealing oF the accumulative roll-bonding (ARB) processed Al alloy 1100” Materials Science and Engineering A, Vol. 480, pp. 148-159, 2008.

 [9]     N. Chawla&  Y. L. Shen, “Mechanical behaviore of particle rainforced metal matrix composites”, Advanced Engineering Materials, Vol. 6, pp. 1438-1656, 2001.

 [10] I. Topic, H. Werner Ho¨ppel&  M. Go¨ken, “Influence of rolling direction on strength and ductility of aluminium and aluminium alloys produced by accumulative roll bonding”, J Mater Sci, Vol. 43, pp. 7320–7325, 2008.

 [11] S. H. Lee, Y. Sakai&  H. Utsunomiya, “Microstructures and mechanical properties of 6061 aluminum alloy processed by accumulative roll bonding”, Materials Science and Engineering A, Vol. 325, pp. 228-235, 2002.

 [12] G. E. Dieter, Mechanical metallurgy,3^rd ed, McGraw-Hill Boston, pp. 229-231, 1983.

 [13] M. Z. Quadir, M. Ferry & P. R. Munroe, “The initial stages of formation of low angle boundaries within lamellar bands during accumulative roll bonding of aluminum”, Scripta Materialia, Vol. 64, pp. 1106–1109, 2011.

 [14] N. Hansen, X. Huang, R. Ueji&  N. Tsuji, “Structure and strength after large strain deformation”, Material Science and Engineering A, Vol. 387-389, pp. 191-194, 2004.

 [15] M. Mazaheri, H. Abdizadeh&  H. R. Baharvandi, “Development of high-performance A356/nano-Al₂O₃ composites”, Materials Science and Engineering A, Vol. 518, pp. 61–64, 2009.

 [16] L. Ghalandary, “Structural, electrical and mechanical properties of Cu-Ag nano-structure composite material produced by ARB method”, PhD. Thesis, Shiraz university, 2010.