Studying the Impact of Multi-Functional Architectural Approaches on Adaptive Reuse of the Industrial Architecture Heritage of Tehran City

Subject Areas : Sustainable urban development

Hamid Asadi ¹ ( ,Faculty of Architectural and Urban Planning Engineering., Shahid Rajaee Teacher Training University, Tehran, Iran. )
hamed abedini ² ( Department of Architecture, Faculty of Art and Architecture,, Khatam University, Tehran, Iran. )

Received: 2023-04-05 Accepted : 2023-07-29 Published : 2023-10-23

Keywords: Delphi method, Adaptability, Multifunctional Architecture, Heritage of Industrial Architecture, Adaptive reuse,

Abstract :

This urban issue of terminating and ignoring such buildings as heritage of industrial architecture has caused the closure of this constructions, in spite of having an applicable life cycle and architectural principles; however, by some reactions from various institutions and to promote economic and social sustainability, the condition for having a new application and restoration these industrial buildings as a heritage is provided, which are examples of the experiences of adaptability in Iran as the main focus of this research. Therefore, the aim of this research is to review the successful experiences of multi-functional and universal adaptable architecture to compare their strategies with the heritage of industrial experiences in the city of Tehran. In this research, the studies of adaptability for universal samples are considered as the basis for exploring the multi-functional architectural strategies. The approaches include three physical layers of the building structure, facilities and facade, which have been evaluated by using Delphi method on the heritage of industrial architecture in city of Tehran as a statistical population. The non-parametric statistical tests of Cochran's Q test and Friedman's test, were applied to analyze data; the theoretical sampling method for both statistical population (Tehran's industrial architectural heritage) and (relevant experts) was adopted. According to the expert’s ideas, the strategies of two-layered structure and facade in the target buildings were confirmed; according to the data analysis, ‘Argo Factory’ had the highest Degrees of Freedom (df) regarding the structure layer, and in relation to the facade, the ‘Iranian Artists Forum’ with the highest average test rank, showed the highest conformity of the facade and the structure. However, regarding the facilities, no compliance of the facility was found. The industrial architectural heritage of Tehran includes some buildings that reused for another purpose as: Argo Factory (changed to Argo Contemporary Art Museum & Cultural Centre), Iranshahr Barracks (Iranian Artists Forum), Beryank Hosiery Factory (Haftchenar's Museum of Wildlife and Natural Monuments) and Qasr Prison (Qasr Garden Museum/ Museum of the Qasr Prison). The target buildings were ranked according to the data acquired by calculating mean rank for the strategies were applied for each layer. According to the results, two characteristics were found in the industrial buildings that can highly affect the adaptive reuse of the heritage of industrial architecture, 1. the concentration of the structure at the lowest points and limited spaces with more free spaces compared to its counterparts, and 2. the adaptation of the building facade to the structure.Extended AbstractIntroduction:The physical and spatial development of Tehran city has caused the relocation of industrial buildings from sub-urban areas to enclosed dense urban places. This issue has resulted in the closure of the industrial architectural heritage despite having useful structural cycles and architectural values. Economically, this untimely destruction of industrial buildings and closing of the plant, while they could still be in their useful life cycle by repairing at a lower cost, caused unrecoverable damages to the economy of developing countries. Under the light of new urban spaces, the process of industrialization has changed the appearance, landscape, and entity of cities, as the industrial urban spaces could historically link to the past life of cities.The industrial architectural heritage, as an implication for the historical achievements of the territory in the modern age, is required to be recognized and preserved. Protecting the existing values ​​of these lands, which are mainly considered as their contemporary heritage of them, requires a comprehensive assessment for finding their physical elements while finding a new application for them for revitalizing them. Therefore, the multi-functionality and adaptability of these spaces, before and after the renovation, should be considered, which is critical for verifying their application to adaptive reuse. In this regard, several measures have been taken in Iran with the cooperation of some institutions to promote economic and social stability and give new applications to these buildings for revitalizing these abundant spaces. These are examples of adaptability in Iran and the kind of experiences which form the foundation of this research. So, this study aims to investigate the successful universal experiences of multi-functional and adaptive architectures to compare their strategies with similar experiences in the industrial heritage of Tehran city.This research was mainly focused on the following actions: 1. Reusing the buildings that are selected for this purpose and revitalizing the abundant spaces, 2. A better selection of buildings, and improving their new function, and 3. reducing the cost of renovation and revitalizing these buildings. Thereby, the relationship between multi-functional architectural features as an independent variable and adaptive reuse of industrial buildings as a dependent variable has been studied.Methodology:An exploratory research method has been used for this study, in which the survey passed through five phases by adapting the indicators for the target society. In this research, the previous studies and experiences on adaptability in the world were applied as examples for adopting multi-functional architectural strategies, which included three physical layers of the building 'structure', 'facilities', and 'façade'. The gathering data was evaluated by applying the Delphi method to the industrial architectural heritage of Tehran city as a statistical population. To get this, the relevant graph of each layer was sketched for each target building consequently.In the graph of the structure, in addition to the load-bearing constructions, other parts with a high risk of destruction, due to the long life of the target structures, were presented, together with the graph of facilities including restrooms, kitchens, and spaces with access to vertical shafts. Finally, the part of facades presented in the graph, including non-opening and hard parts, such as bricks and masonry components that were either irreplaceable or their replacement brought the risk of destroying the adjacent parts.After accomplishing the first step of Delphi, by using diagrams and analyzing the data acquired, a questionnaire was presented to the interviewee who was experts in the field of architecture, academic professors, architecture Ph.D. researchers, and skillfully experienced architects in the relevant field; following this, the gathering data were examined for next evaluation to determine the positive and negative opinions. Then, in case of disagreements on layers, the questionnaire was presented to the experts again together with the results of 'distribution frequency', based on the dichotomous variables and rank cases, according to the previous results of Friedman's testData analysis was performed by applying the Friedman and Cochran Q tests and a theoretical-based method was applied for the sampling of the statistical population of industrial architectural heritage of Tehran and the relevant experts. The industrial architectural heritage of Tehran city in this study included: 1 Argo Factory (Argo Contemporary Art Museum & Cultural Centre), Iranshahr Barracks (Iranian Artists Forum), Beryank Hosiery Factory (Haftchenar's Museum of Wildlife and Natural Monuments) and Qasr Prison (Qasr Garden Museum/ Museum of the Qasr Prison) which were ranked according to the mean rank calculated for each layer. Results & Discussion:According to the positive opinions of the experts, the introduced strategies for two layers of structure and facade of target buildings were reviewed and confirmed; Based on the data acquired for the structure layer, 'Argo Factory' showed the highest Degrees of Freedom (df) for spaces and for the facade layer, the 'House of Artists' had the highest average rank for facade-structure conformity. However, in the facilities layer, the adaptability between the building facade and the structure was not confirmed.According to the results, the concentration of the structure in the lowest points with more free spaces was confirmed together with the adaptation of the facade to the structure as two characteristics in industrial buildings that were noticeable in the process of adaptive reuse of target buildings.Conclusion:For industrial buildings, Degrees of Freedom (df) for spaces are highly required due to their specific function, which can provide more future functions. Specifically, regarding the two industrial plants of 'Argo Factory' and 'Beryank Hosiery Factory' more free spaces are required due to the large scale of facilities and activities, similar to 'The House of Artists' and 'Qasr Garden Museum', which are facing a larger scale of population than other their counterparts. Such indicators can be effective in architectural heritage buildings for giving new future applications to them and improving adaptive reuse.

References:

• Aghaei, S., Ghafourian, M., & Akhound, N. (2021). An Assessment of Extensibility and Divisibility in the Flexibility of Apartments’ Interiors and Adjoining Units (the Case of Tehran District 2). Soffeh, 31(1), 33-51. doi: 10.29252/soffeh.31.1.33


• Ahmadi, F., Nasiriani, KH., & Abazari, P. (2008). Delphi Method: a Tool in Research. Iranian Journal of Medical Education, 8(1), 175-185. http://ijme.mui.ac.ir/article-1-790-fa.html


• Alexander, C. (1977). A pattern language: towns, buildings, construction. Oxford: Oxford university press. https://www.amazon.com/Pattern-Language-Buildings-Construction-Environmental/dp/0195019199


• Arbab, P., & Alborzi, G. (2022). Toward developing a sustainable regeneration framework for urban industrial heritage. Journal of Cultural Heritage Management and Sustainable Development, 12(3), 263-274. https://doi.org/10.1108/JCHMSD-04-2020-0059


• Asadi, H., Hashemi Toghroljerdi, S. M., Ghafourian, M., & Abedini, H. (2023). Evaluation of the Flexible Elements Components in Housing Design to Determine their Priority according to Delphi Design Method. International Journal of Architecture and Urban Development, 13(1), 37-50. doi: 10.30495/ijaud.2022.63471.1564


• Bani Masoud, A. (2015). Contemporary architecture of Iran, Honar-e Memari, Tehran. https://opac.nlai.ir/opac-prod/search/briefListSearch.do?command=FULL_VIEW&id=2425009&pageStatus


• Brady, SR. (2015). Utilizing and adapting the Delphi method for use in qualitative research, International Journal of Qualitative Methods, 14(5), 1-6. https://doi.org/10.1177%2F1609406915621381


• Cellucci, C., & M. Di Sivo. (2015). The Flexible Housing: Criteria and Strategies for Implementation of the Flexibility. Journal of Civil Engineering and Architecture, 9, 845-852. http://dx.doi.org/10.17265/1934-7359/2015.07.011


• Corbusier, L. (2013). Towards a new architecture, Courier Corporation, Massachusetts. https://www.amazon.com/Towards-New-Architecture-Corbusier/dp/1614276056


• De Paris, S., & Lopes, C.N.L. (2018). Housing flexibility problem: review of recent limitations and solutions. Frontiers of Architectural Research, 7(1), 80-91. https://doi.org/10.1016/j.foar.2017.11.004


• Deilmann, H., Pfeifer, H., & Krause, K. J. (1970). Die anpassungsfähige wohnung. Bauen Und Wohnen, 1970(3), 77–85.


• Esmaeili Jelodar, ME., & Avvali Pooryan, A. (2018). An Archaeological View on the Industrialization of Tehran and Transformation of its Manufacturing Structures in the Late Qajar and Early Pahlavi Periods. Journal of Archaeological Studies, 10(1), 1-20. doi: 10.22059/jarcs.2018.214183.142323


• Femenias, P. & Geromel, F. (2019). Adaptable housing? A quantitative study of contemporary apartment layouts that have been rearranged by end-users. Journal of Housing and the Built Environment, 35(2), 481-505. https://doi.org/10.1007/s10901-019-09693-9


• Ghafourian, M., & Aghaei, S. (2016). Flexibility Criteria for Design of Apartment Housing in Iran. Soffeh, 26(3), 41-64. https://dorl.net/dor/20.1001.1.1683870.1395.26.3.3.0


• Ghafourian, M., Asadi, H., & Sharifi M. (2021). Multi-functional Architecture: Design Strategies and Principles, Jahad_e Daneshgahi, Qazvin. https://opac.nlai.ir/opac-prod/search/briefListSearch.do?command=FULL_VIEW&id=8434438&pageStatus


• Ghanbari, AA. (2018). Industrial Heritage in Historical Urban Landscapes; the Role of Sugar Factory in Urban Landscape of Varamin. MANZAR, the Scientific Journal of landscape, 10(43), 2826-33. doi:10.22034/manzar.2018.68623


• Gopinath, V., & Ramadoss, R. (2021). Review on structural health monitoring for restoration of heritage buildings. Materials Today: Proceedings, 43, 1534-1538. https://doi.org/10.1016/j.matpr.2020.09.318


• Habraken, JN. (2003). Open Building as a condition for industrial construction. 20th International Symposium on Automation and Robotics in Construction, sep 21-24, Eindhoven, Netherlands. 37-42. https://doi.org/10.22260/ISARC2003%2F0004


• Habraken, J.N. (1998). The structure of the Ordinary: Form and Control in the Built Environment. Massachuset: The MIT Press. https://mitpress.mit.edu/books/structure-ordinary


• Habraken, J.N. (2008). Design for flexibility. Building Research & Information, 36(3), 290-296. https://doi.org/10.1080/09613210801995882


• Hanachi, P., Fadaei Nezhad Bahramjerdi , S., & Taymourtash ,S. (2019). Reviewing the implementation experiences of adaptability and reuse of industrial heritage in Iran, Tehran University Press, Tehran. https://opac.nlai.ir/opac-prod/search/briefListSearch.do?command=FULL_VIEW&id=5822764&pageStatus


• Heidari, S., Hanachi, P., Teymoortash, S. (2019). The Adaptive Reuse of Industrial Heritage, an Approach Based on Energy Recycle. Naqshejahan, 9 (1), 45-53. http://bsnt.modares.ac.ir/article-2-27539-fa.html


• Henz, A., & Henz, H. (1995). Anpassbare wohnungen (Hefte zum wohnen Nr. 3). ETH Wohnforum.


• Hertzberger H. (2005). Lessons for students in architecture. Rotterdam: NAi010 Publishers. https://www.amazon.com/Lessons-Students-Architecture-Herman-Hertzberger/dp/9462083193


• Higuchi, Y., Gotou, T., Konishi, H, Katsuragawa, Y., & Suzuki, K. (2005). Development of Element Technolofies Supporting Skeleton/Support INFILL House(Demonstrateive Experiment for Next Generation Structural Housing). The 2005 World Sustainable Building Conference, Sep 27-29, Tokyo, Japan, 2833-2840. https://www.semanticscholar.org/paper/c6c74d1cc81cdcd1571bed2dedb75574efb64cc3


• Hosseini, A., & Yolyeh San Vansan, N. (2023). Measuring of residents' satisfaction with the quality of housing in urban neighborhoods with the approach of spatial justice: The case study on District 2 of Tehran. Urban Environmental Planning and Development, 3(10), 69-86. doi: 10.30495/juepd.2023.1982743.1167


• Izadi, MS., & Amiri, N. (2016). Internal development, concordant, balanced and stable pattern to develop and promote the urban quality, planning for redevelopment of urban military land. Bagh-e Nazar, 13(41), 35-46. http://www.bagh-sj.com/article_32947.html?lang=fa


• Khazaei, Y. (2018). An Analysis of the Pre-modern and Modern Prison Structure Case Study: Tehran’s Anbar and Qasr Prisons. Historical Researches, 10(2), 13-30. doi:10.22108/jhr.2018.76386.0


• Leupen, B.(2006). The polyvalent dwelling. International Conference On Adaptable Building Structures, July 03-05, Eindhoven, Netherland. http://arkitekturforskning.net/na/article/view/156


• Loch, S. (2011). Das adaptive habitat. Typologie und bedeutungswandel fexibler wohnmodelle. Stuttgart: Institut Wohnen und Entwerfen der Universität Stuttgart. https://books.google.com/books/about/Das_adaptive_Habitat.html?id=lxEyswEACAAJ


• Mahdiun, S., & Fadaei nezhad, S. (2019). Principles of Retooling for the Adaptive Reuse of the Industrial Architectural Heritage. Naqshejahan, 9 (1), 23-31 http://bsnt.modares.ac.ir/article-2-31858-fa.html


• Malakouti, M., Faizi, M., Hosseini, SB., & Norouzian-Maleki, S. (2019). Evaluation of flexibility components for improving housing quality using fuzzy TOPSIS method. Journal of Building Engineering. 22, 154-160 https://doi.org/10.1016/j.jobe.2018.11.019


• Maleki K. (2009). Méthodes quantitatives de consultation d'experts: Delphi, Delphi public, Abaque de Régnier et impacts croisés, Editions Publibook, Paris. https://www.amazon.de/-/en/Khosro-Maleki/dp/2748346653


• Masoud, S., Eshrati, P., Faizi, M., & Einifar, A. (2019). Developing Theoretical Framework of Value in Interior Architecture Design of Heritage Buildings Case Study: Garden Museum of the Qasr Prison. Honar-Ha-Ye-Ziba: Memary Va Shahrsazi, 24(3), 97-110. doi: 10.22059/jfaup.2019.272539.672192


• Nagy, G., & Ashraf, F. (2021). HBIM platform & smart sensing as a tool for monitoring and visualizing energy performance of heritage buildings. Developments in the Built Environment, 8, 100056. https://doi.org/10.1016/j.dibe.2021.100056


• Nasr, T., Salahi, S., & Piran, N. (2022). Explaining the Semantic Components of the Islamic City in Line with Urban Sustainable Development. Urban Environmental Planning and Development, 2(6), 95-112. doi:10.30495/juepd.2022.690748


• Nili R, Diba D, Mahdavinejad M, Shahcherghi A. (2018). An Evaluation of Quality Revitalization of Contemporary Iranian Industrial Heritage Using Analytical Hierarchy Process (AHP) (CASE STUDY: LINEN WAREHOUSE OF TEHRAN), 4, 41-12 https://jest.srbiau.ac.ir/article_11680.html


• Nilsson, R., Thorén, E., & Åhlund, O. (1971). Anpassbara bostäder. Etapp 1. Institutionen för byggnadsfunktionslära, Tekniska högskolan i Lund, Lund. http://hdl.handle.net/2077/46256


• Parkinson, M., & Bianchini, F. (1993). Cultural policy and urban regeneration: the West European experience, Manchester University Press, Manchester. https://books.google.com/books/about/Cultural_Policy_and_Urban_Regeneration.html?id=N327AAAAIAAJ


• Pascal, G., & Sylvie T. (2014). Guide Pratique de Recherche en Réadaptation, De Boeck Superieur, Ottignies-Louvain-la-Neuve. https://www.amazon.fr/Guide-pratique-recherche-en-r%C3%A9adaptation/dp/2353272673


• Pereira, D. Afonso, A. (2015). Overview of Friedman’s test and post-hoc analysis. Communications in Statistics-Simulation and Computation, 44(10), 2636-2653. https://doi.org/10.1080/03610918.2014.931971


• pourzargar, M., & Abedini, H. (2020). Reading the Hidden Geometry in the Historic City and the Impact of Modern Evolution on It; Case Study: Sabzeh-Meydan, Tehran. Naqshejahan, 10 (3), 231-238. http://bsnt.modares.ac.ir/article-2-43327-fa.html


• Priemus, H. (1969). Wonen, kreativiteit en aanpassing. Onderzoek naar voorwaarden voor optimale aanpassingsmogelijkheden in de woningbouw, Mouton, . Den Haag. https://lib.ugent.be/nl/catalog/rug01:000747768


• Priemus, H. (1993). Flexible Housing Fundamentals and Background. Open House International. 18(4), 19–26.


• Rabeneck, A., Sheppard, D., & Town, P. (1973). Housing fexibility?. Architectural Design, 11, 698–727. https://www.academia.edu/48065549/Housing_Flexibility


• Rezaei Ghahroodii, S., & Mahdavinejad, M. Reviewing and Implementing International Valuation Criteria for Industrial Architectural Heritage. Mmi, 9 (17), 21-38. http://mmi.aui.ac.ir/article-1-526-fa.html


• Samadzadehyazdi, S., Ansari, M., & Bemanian, M. (2019). Environment Sustainability through Adaptive Reuse (Case Study: Industrial Heritage of Iran). Naqshejahan, 9 (1), 67-77. http://bsnt.modares.ac.ir/article-2-26403-en.html


• Samadzadehyazdi, S., Ansari, M., Mahdavinejad, M. & Bemanian, M. (2020). Significance of authenticity: learning from best practice of adaptive reuse in the industrial heritage of Iran. International Journal of Architectural Heritage, 14(3), 1-13. https://doi.org/10.1080/15583058.2018.1542466


• Schneider, T. & Till, T. (2005). Flexible housing: opportunities and limits. ARQ: Architectural Research Quarterly, 9(2), 156-166. https://doi.org/10.1017/S1359135505000199


• Schneider, T. and Till, J. (2007). Flexible housing. New York: Architectural Press. https://www.amazon.com/Flexible-Housing-Jeremy-Till/dp/0750682027


• Shaohua, J. Meng, W. Ling, M. (2023). Gaps and requirements for applying automatic architectural design to building renovation. Automation in Construction. 147. https://doi.org/10.1016/j.autcon.2023.104742 .


• Sotodeh, SH., & Ghobadian, V. (2022). Explaining Contemporization and Systematic Adaptation of Alborz Industrial Heritage based on Sustainable Architecture, Naqshejahan, 26, 12(1): 59-83. http://bsnt.modares.ac.ir/article-2-58419-en.html


• Tarpio, J. (2015). patial Logics of a Flexible Apartment: On the Spatial Starting Points and Design Principles of an Apartment that Can Adapt to Different Uses. Tampere: Tampereen teknillinen yliopisto. http://urn.fi/URN:ISBN:978-952-15-3510-9


• Tarpio, J., & Huuhka, S. (2022). Residents’ views on adaptable housing: a virtual reality-based study. Buildings and Cities, 3(1), 93–110. https://urn.fi/URN:NBN:fi:tuni-202203182601


• Tarpio, J., Huuhka, S., & Vestergaard, I. (2021). Barriers to implementing adaptable housing: architects’ perceptions in Finland and Denmark. Journal of Housing and the Built Environment, 36(3), 1-23 https://doi.org/10.1007/s10901-021-09913-1


• Till, J. & Schneider, T. (2005). Flexible housing: the means to the end. ARQ: architectural research quarterly, 9(4), 287-296. https://doi.org/10.1017/S1359135505000345


• Venturi, R., & Brownlee, DB. (1977). Complexity and Contradiction in Architecture. New York: The Museum of Modern Art. https://www.amazon.com/Complexity-Contradiction-Architecture-Robert-Venturi/dp/0870702823


• Živković, M., Keković, A., & Slavisa, K. (2014). The Motives for Application of the Flexible Elements in the Housing Interior. Facta Universitatis, Series: Architecture and Civil Engineering, 12(1), 41-51. https://doi.org/10.2298/FUACE1401041Z