A review on evaluation of natural polymers with the approach of drug delivery system using herbal plant microcapsules
Subject Areas :
Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering
Amirreza Esmaeili
1
,
Romina Hemami
2
,
Yashar Ghaffari
3
,
Somayeh Abdollahi
4
1 - Plant Protection Faculty of Agriculture, Shahrekord University, Chaharmahal and Bakhtiari, Iran
2 - Faculty of Pharmaceutical Chemistry, Azad University of Medical Sciences, Tehran Branch, Tehran, Iran
3 - Department of Biomedical Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran
4 - Department of biomedical engineering Isfahan (Khorasgon) Branch, Islamic Azad University, Isfahan, Iran
Received: 2022-06-11
Accepted : 2022-08-21
Published : 2022-06-01
Keywords:
Mechanical Properties,
Herbal medicine,
Drug release,
Polymer-chitosan,
Abstract :
Drug release in the body, mainly by digestive (tablets, capsules, and syrups) and non-digestive (injections, eye drops, and creams) are known as conventional technique. In most of these methods, the drug travels through the body during exposure to the acidic environment of the stomach, passing through the tight connections of cells in the intestinal wall. This attitude is based on the fact that a sufficient concentration of the drug enters the bloodstream. The process of targeted drug delivery maintains the level of an appropriate drug concentrations for a long time and reduces many of the usual therapeutic limitations such as the number of doses used. In this research, the use of natural biopolymers in the engineering and medical engineering industries and the use of electro spraying for core-shell have been investigated. Also, the side effects of simple drug release in the systemic distribution are unclear. Each targeted delivery system includes a target drug, carrier, and ligand, in which the distribution, metabolism, and cellular uptake of the drug are determined by the physicochemical characteristics and biological behavior of the carrier and ligand. Therefore, proper carrier and ligand design increases drug efficacy in patient tissues and reduces drug toxicity in other healthy tissues. Many new techniques such as electrospray using natural polymers can use for treatment of those disease with sufficient time of drug release using an appropriate drug.
References:
Anttonen, V., Tanner, T., Kämppi, A., Päkkilä, J., Tjäderhane, L., & Patinen, P. (2012). A methodological pilot study on oral health of young, healthy males. Dental Hypotheses, 3(3), 106.
Gupta, R., Thakur, N., Thakur, S., Gupta, B., & Gupta, M. (2013). Talon cusp: a case report with management guidelines for practicing dentists. Dental Hypotheses, 4(2), 67.
Kjaer, I. (2013). External root resorption: Different etiologies explained from the composition of the human root-close periodontal membrane. Dental Hypotheses, 4(3), 75.
Motamedi, M. R. K., Behzadi, A., Khodadad, N., Zadeh, A. K., & Nilchian, F. (2014). Oral health and quality of life in children: a cross-sectional study. Dental Hypotheses, 5(2), 53.
Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.
Karamian, E., Motamedi, M. R. K., Khandan, A., Soltani, P., & Maghsoudi, S. (2014). An in vitro evaluation of novel NHA/zircon plasma coating on 316L stainless steel dental implant. Progress in Natural Science: Materials International, 24(2), 150-156.
Karamian, E., Abdellahi, M., Khandan, A., & Abdellah, S. (2016). Introducing the fluorine doped natural hydroxyapatite-titania nanobiocomposite ceramic. Journal of Alloys and Compounds, 679, 375-383.
Najafinezhad, A., Abdellahi, M., Ghayour, H., Soheily, A., Chami, A., & Khandan, A. (2017). A comparative study on the synthesis mechanism, bioactivity and mechanical properties of three silicate bioceramics. Materials Science and Engineering: C, 72, 259-267.
Ghayour, H., Abdellahi, M., Ozada, N., Jabbrzare, S., & Khandan, A. (2017). Hyperthermia application of zinc doped nickel ferrite nanoparticles. Journal of Physics and Chemistry of Solids, 111, 464-472.
Kazemi, A., Abdellahi, M., Khajeh-Sharafabadi, A., Khandan, A., & Ozada, N. (2017). Study of in vitro bioactivity and mechanical properties of diopside nano-bioceramic synthesized by a facile method using eggshell as raw material. Materials Science and Engineering: C,71, 604-610.
Khandan, A., & Ozada, N. (2017). Bredigite-Magnetite (Ca7MgSi4O16-Fe3O4) nanoparticles: A study on their magnetic properties. Journal of Alloys and Compounds,726, 729-736.
Khandan, A., Jazayeri, H., Fahmy, M. D., & Razavi, M. (2017). Hydrogels: Types, structure, properties, and applications. Biomat Tiss Eng,4(27), 143-69.
Sharafabadi, A. K., Abdellahi, M., Kazemi, A., Khandan, A., & Ozada, N. (2017). A novel and economical route for synthesizing akermanite (Ca2MgSi2O7) nano-bioceramic. Materials Science and Engineering: C, 71, 1072-1078.
Khandan, A., Abdellahi, M., Ozada, N., & Ghayour, H. (2016). Study of the bioactivity, wettability and hardness behaviour of the bovine hydroxyapatite-diopside bio-nanocomposite coating. Journal of the Taiwan Institute of Chemical Engineers, 60, 538-546.
Shayan, A., Abdellahi, M., Shahmohammadian, F., Jabbarzare, S., Khandan, A., & Ghayour, H. (2017). Mechanochemically aided sintering process for the synthesis of barium ferrite: Effect of aluminum substitution on microstructure, magnetic properties and microwave absorption. Journal of Alloys and Compounds, 708, 538-546
Heydary, H. A., Karamian, E., Poorazizi, E., Khandan, A., & Heydaripour, J. (2015). A novel nano-fiber of Iranian gum tragacanth-polyvinyl alcohol/nanoclay composite for wound healing applications. Procedia Materials Science,11, 176-182.
Karamian, E., Khandan, A., Kalantar Motamedi, M. R., & Mirmohammadi, H. (2014). Surface characteristics and bioactivity of a novel natural HA/zircon nanocomposite coated on dental implants. BioMed research international,
Jabbarzare, S., Abdellahi, M., Ghayour, H., Arpanahi, A., & Khandan, A. (2017). A study on the synthesis and magnetic properties of the cerium ferrite ceramic. Journal of Alloys and Compounds, 694, 800-807.
Razavi, M., & Khandan, A. (2017). Safety, regulatory issues, long-term biotoxicity, and the processing environment. In Nanobiomaterials Science, Development and Evaluation(pp. 261-279). Woodhead Publishing.
Khandan, A., Ozada, N., & Karamian, E. (2015). Novel microstructure mechanical activated nano composites for tissue engineering applications. J Bioeng Biomed Sci, 5(1), 1.
Ghayour, H., Abdellahi, M., Bahmanpour, M., & Khandan, A. (2016). Simulation of dielectric behavior in RFeO $$ _ {3} $$3 orthoferrite ceramics (R= rare earth metals). Journal of Computational Electronics, 15(4), 1275-1283.
Saeedi, M., Abdellahi, M., Rahimi, A., & Khandan, A. (2016). Preparation and characterization of nanocrystalline barium ferrite ceramic. Functional Materials Letters, 9(05), 1650068.
Khandan, A., Karamian, E., Faghih, M., & Bataille, A. (2014). Formation of AlN Nano Particles Precipitated in St-14 Low Carbon Steel by Micro and Nanoscopic Observations. Journal of Iron and Steel Research International, 21(9), 886-890.
Karamian, E. B., Motamedi, M. R., Mirmohammadi, K., Soltani, P. A., & Khandan, A. M. (2014). Correlation between crystallographic parameters and biodegradation rate of natural hydroxyapatite in physiological solutions. Indian J Sci Res, 4(3), 092-9.
Monfared, R. M., Ayatollahi, M. R., & Isfahani, R. B. (2018). Synergistic effects of hybrid MWCNT/nanosilica on the tensile and tribological properties of woven carbon fabric epoxy composites. Theoretical and Applied Fracture Mechanics, 96, 272-284.
Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2021). Thermal buckling analysis of sandwich plates with soft core and CNT-Reinforced composite face sheets. Journal of Sandwich Structures & Materials, 23(8), 3606-3644.
Kamarian, S., Bodaghi, M., Isfahani, R. B., & Song, J. I. (2022). A comparison between the effects of shape memory alloys and carbon nanotubes on the thermal buckling of laminated composite beams. Mechanics Based Design of Structures and Machines, 50(7), 2250-2273.
Barbaz-I, R. (2014). Experimental determining of the elastic modulus and strength of composites reinforced with two nanoparticles (Doctoral dissertation, Doctoral dissertation, MSc Thesis, School of Mechanical Engineering Iran University of Science and Technology, Tehran, Iran).
Khandan, A., & Esmaeili, S. (2019). Fabrication of polycaprolactone and polylactic acid shapeless scaffolds via fused deposition modelling technology. Journal of Advanced Materials and Processing, 7(4), 16-29.
Ravi, G. R., & Subramanyam, R. V. (2012). Calcium hydroxide-induced resorption of deciduous teeth: A possible explanation. Dental Hypotheses, 3(3), 90.
Narayanan, N., & Thangavelu, L. (2015). Salvia officinalis in dentistry. Dental Hypotheses, 6(1), 27.
Khandan, A., Karamian, E., & Bonakdarchian, M. (2014). Mechanochemical synthesis evaluation of nanocrystalline bone-derived bioceramic powder using for bone tissue engineering. Dental Hypotheses, 5(4), 155.
Shirani, K., Sheikhbahaei, E., Torkpour, Z., Nejad, M. G., Moghadas, B. K., Ghasemi, M., & Khandan, A. (2020). A narrative review of COVID-19: the new pandemic disease. Iranian Journal of Medical Sciences, 45(4), 233.
Ghasemi, M., Nejad, M. G., & Bagzibagli, K. (2017). Knowledge management orientation: an innovative perspective to hospital management. Iranian journal of public health, 46(12), 1639.
Mosallaeipour, S., Nejad, M. G., Shavarani, S. M., & Nazerian, R. (2018). Mobile robot scheduling for cycle time optimization in flow-shop cells, a case study. Production Engineering, 12(1), 83-94.
Saeedi, M. R., Morovvati, M. R., & Mollaei-Dariani, B. (2020). Experimental and numerical investigation of impact resistance of aluminum–copper cladded sheets using an energy-based damage model. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 42(6), 1-24.
Kardan-Halvaei, M., Morovvati, M. R., & Mollaei-Dariani, B. (2020). Crystal plasticity finite element simulation and experimental investigation of the micro-upsetting process of OFHC copper. Journal of Micromechanics and Microengineering, 30(7), 075005.
Fazlollahi, M., Morovvati, M. R., & Mollaei Dariani, B. (2019). Theoretical, numerical and experimental investigation of hydro-mechanical deep drawing of steel/polymer/steel sandwich sheets. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 233(5), 1529-1546.
Saeedi, M. R., Morovvati, M. R., & Alizadeh-Vaghasloo, Y. (2018). Experimental and numerical study of mode-I and mixed-mode fracture of ductile U-notched functionally graded materials. International Journal of Mechanical Sciences, 144, 324-340.
Morovvati, M. R., & Mollaei-Dariani, B. (2018). The formability investigation of CNT-reinforced aluminum nano-composite sheets manufactured by accumulative roll bonding. The International Journal of Advanced Manufacturing Technology, 95(9), 3523-3533.
Morovvati, M. R., & Dariani, B. M. (2017). The effect of annealing on the formability of aluminum 1200 after accumulative roll bonding. Journal of Manufacturing Processes, 30, 241-254.
Morovvati, M. R., Lalehpour, A., & Esmaeilzare, A. (2016). Effect of nano/micro B4C and SiC particles on fracture properties of aluminum 7075 particulate composites under chevron-notch plane strain fracture toughness test. Materials Research Express, 3(12), 125026.
Fatemi, A., Morovvati, M. R., & Biglari, F. R. (2013). The effect of tube material, microstructure, and heat treatment on process responses of tube hydroforming without axial force. The International Journal of Advanced Manufacturing Technology, 68(1), 263-276.
Pourmoghadam, M. N., Esfahani, R. S., Morovvati, M. R., & Rizi, B. N. (2013). Bifurcation analysis of plastic wrinkling formation for anisotropic laminated sheets (AA2024–Polyamide–AA2024). Computational materials science,77, 35-43.
Morovvati, M. R., Fatemi, A., & Sadighi, M. (2011). Experimental and finite element investigation on wrinkling of circular single layer and two-layer sheet metals in deep drawing process. The International Journal of Advanced Manufacturing Technology, 54(1), 113-121.
Morovvati, M. R., Mollaei-Dariani, B., & Haddadzadeh, M. (2010). Initial blank optimization in multilayer deep drawing process using GONNS. Journal of manufacturing science and engineering, 132(6).
Fatemi, A., Biglari, F., & Morovvati, M. R. (2010). Influences of inner pressure and tube thickness on process responses of hydroforming copper tubes without axial force. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 224(12), 1866-1878.
Anarestani, S. S., Morovvati, M. R., & Vaghasloo, Y. A. (2015). Influence of anisotropy and lubrication on wrinkling of circular plates using bifurcation theory. International Journal of Material Forming, 8(3), 439-454.
Pirmoradian, M., Torkan, E., Zali, H., Hashemian, M., & Toghraie, D. (2020). Statistical and parametric instability analysis for delivery of nanoparticles through embedded DWCNT. Physica A: Statistical Mechanics and Its Applications, 554, 123911.
Pirmoradian, M., Torkan, E., & Toghraie, D. (2020). Study on size-dependent vibration and stability of DWCNTs subjected to moving nanoparticles and embedded on two-parameter foundations. Mechanics of Materials, 142, 103279.
Pirmoradian, M., & Karimpour, H. (2017). Parametric resonance and jump analysis of a beam subjected to periodic mass transition. Nonlinear Dynamics, 89(3), 2141-2154.
Abedpour, M., Kamyab Moghadas, B., & Tamjidi, S. (2020). Equilibrium and kinetic study of simultaneous removal of Cd (II) and Ni (II) by acrylamide-based polymer as effective adsorbent: optimisation by response surface methodology (RSM). International Journal of Environmental Analytical Chemistry, 1-18.
Tamjidi, S., Esmaeili, H., & Moghadas, B. K. (2021). Performance of functionalized magnetic nanocatalysts and feedstocks on biodiesel production: a review study. Journal of Cleaner Production,305, 127200.
Moghadas, B. K., Esmaeili, H., Tamjidi, S., & Geramifard, A. (2022). Advantages of nanoadsorbents, biosorbents, and nanobiosorbents for contaminant removal. In Nano-Biosorbents for Decontamination of Water, Air, and Soil Pollution (pp. 105-133). Elsevier.
Zaeri, H., Moghadas, B. K., Honarvar, B., & Rad, A. S. (2021). Response Surface Methodology Towards Optimization of Calotropis Procera Essential Oil Extraction by Using Supercritical CO2. The Natural Products Journal, 11(1), 97-107.
Chehrazi, M., & Moghadas, B. K. (2021). Experimental study of the effect of single walled carbon nanotube/water nanofluid on the performance of a two-phase closed thermosyphon. Journal of the Serbian Chemical Society, 86(3), 313-326.
Ghomi, F., Daliri, M., Godarzi, V., & Hemati, M. (2021). A novel investigation on the characterization of bioactive glass cement and chitosan-gelatin membrane for jawbone tissue engineering. Journal of Nanoanalysis, 8(4), 292-301.
Mirbehbahani, F. S., Hejazi, F., Najmoddin, N., & Asefnejad, A. (2020). Artemisia annua L. as a promising medicinal plant for powerful wound healing applications. Progress in Biomaterials, 9(3), 139-151.
Malekipour Esfahani, M. H., Sharifinezhad, N., Hemati, M., & Gholami, A. M. (2021). Evaluation of mechanical properties of bioglass materials for dentistry application. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 19-29.
Ghomi, F., Asefnejad, A., Daliri, M., Godarzi, V., & Hemati, M. (2022). Fabrication and characterization of chitosan/gelatin scaffold with bioactive glass reinforcement using PRP to regenerate bone tissue. Nanomedicine Research Journal, 7(2), 205-213.
Khaksarshahmirzadi, E., Saner, T., Attaeyan, A., Abdollahi, S., Mohammadi, M., & Heydari, S. (2021). Evaluation of the use of robotic surgery with remote simulation for use in the field of Medical Tourism and Pro-Tourism development. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 14(1), 47-59.
Mansouri, A., Heidari, A., Karimian, F., Gholami, A. M., Latifi, M., & Shahriari, S. (2021). Molecular simulation for prediction of mechanical properties of polylactic acid polymer for biotechnology applications. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 31-40.
Asgari, F., Minooei, A., Abdolahi, S., Shokrani Foroushani, R., & Ghorbani, A. (2021). A new approach using Machine Learning and Deep Learning for the prediction of cancer tumor. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 41-51.
Ghorbani, A., Shahriari, S., & Gholami, A. M. (2021). Investigation of cell biomechanics and the effect of biomechanical stimuli on cancer and their characteristics. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(4), 67-79.
Heydari, S., Attaeyan, A., Bitaraf, P., Gholami, A. M., & Kamyab Moghadas, B. (2021). Investigation of modern ceramics in bioelectrical engineering with proper thermal and mechanical properties. Journal of Simulation and Analysis of Novel Technologies in Mechanical Engineering, 13(3), 43-52.
Seyedi, S. Y., Salehi, F., Payandemehr, B., Hossein, S., Hosseini-Zare, M. S., Nassireslami, E., Yazdi, B. B., & Sharifzadeh, M. (2014). Dual effect of cAMP agonist on ameliorative function of PKA inhibitor in morphine-dependent mice. Fundamental & clinical pharmacology, 28(4), 445–454.
Nassireslami, E., Nikbin, P., Amini, E., Payandemehr, B., Shaerzadeh, F., Khodagholi, F., Yazdi, B. B., Kebriaeezadeh, A., Taghizadeh, G., & Sharifzadeh, M. (2016). How sodium arsenite improve amyloid β-induced memory deficit?. Physiology & behavior, 163, 97–106.
Amini, E., Nassireslami, E., Payandemehr, B., Khodagholi, F., Foolad, F., Khalaj, S., Hamedani, M. P., Azimi, L., & Sharifzadeh, M. (2015). Paradoxical role of PKA inhibitor on amyloidβ-induced memory deficit. Physiology & behavior, 149, 76–85
Rajeswari, S., Prasanthi, T., Sudha, N., Swain, R. P., Panda, S., & Goka, V. (2017). Natural polymers: A recent review. World J. Pharm. Pharm. Sci,6, 472-494.
Park, J. H., Ye, M., & Park, K. (2005). Biodegradable polymers for microencapsulation of drugs. Molecules, 10(1), 146-161.
Mahale, R. S., Shamanth, V., Hemanth, K., Nithin, S. K., Sharath, P. C., Shashanka, R., ... & Shetty, D. (2022). Processes and applications of metal additive manufacturing. Materials Today: Proceedings,54, 228-233.
Mahale, R. S., Shamanth, V., Sharath, P. C., Shashanka, R., & Hemanth, K. (2021). A review on spark plasma sintering of duplex stainless steels. Materials Today: Proceedings,45, 138-144.
Chaudhari, V., Bodkhe, V., Deokate, S., Mali, B., & Mahale, R. (2019). Parametric optimization of TIG welding on SS 304 and MS using Taguchi approach. Int. Res. J. Eng. Technol, 6(5), 880-885.
Patil, A., Banapurmath, N., Hunashyal, A. M., Meti, V., & Mahale, R. (2022). Development and Performance analysis of Novel Cast AA7076-Graphene Amine-Carbon Fiber Hybrid Nanocomposites for Structural Applications. Biointerface Research in Applied Chemistry, 12(2), 1480-1489.
Kamble, P., & Mahale, R. (2016). Simulation and parametric study of clinched joint. Int Res J Eng Technol, 3(05), 2730-2734.
