Subject Areas : journal of New Materials

سهراب راه پیما ¹ (کارشناس ارشد مهندسی مواد- خوردگی، دانشگاه آزاد اسلامی واحد نجفآباد)
محمدحسین فتحی ² (- استاد، گروه پژوهشی بیومواد، دانشکده مهندسی مواد، دانشگاه صنعتی اصفهان)
رضا ابراهیمی کهریزسنگی ³ (دانشیار، دانشکده مهندسی مواد، دانشگاه آزاد اسلامی واحد نجفآباد)
علی دوست محمدی ⁴ (استادیار، گروه مهندسی مواد، دانشکده فنی مهندسی، دانشگاه شهرکرد)

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2012-12-21

Keywords:

References:

1- N. ,QingJie, and S. Zhu, RuodingWang,"Preparation and characterization

ofmacroporous sol–gel bioglass", CeramicsInternational,Vol. 31, pp. 641–646, 2005.

2- C. Garcia, S. Cere, and A. Duran,"Bioactive coatings prepared by sol–gel on

stainless steel316L", Journal of NonCrystallineSolids, vol. 348, pp. 218-224,

2004.

3- P. Galliano, J. J. De Damborenea, M. J.Pascual, and A. Duran, "Sol-gel coatings on

316Lsteel for clinical applications", Journal ofsol-gel science and technology,vol. 13, pp.529-

534, 1998.

4- R. Ramachandra and T.S. Kannan,"Synthesis andSintering of Hydroxyapatite–

Zirconia Composites", Materials Science andEngineering,vol. 20, pp. 187–193, 2002.

5- A. Balamurugan, G. Balossier, S. Kannan, J.Michel, J. Faure and S. Rajeswari,

"Electrochemical and StructuralCharacterisation of Zirconia Reinforced

Hydroxyapatite Bioceramic Sol–Gel Coatingson Surgical Grade 316L SS for Biomedical

Applications",Ceramics International,vol. 33,pp. 605–614, 2007.

6- Y. Xie, X. Liu, Ch. Ding,and P.K. Chu,"Bioconductivity and mechanical properties of

plasma-sprayed dicalcium silicate/zirconiacomposite coating" Materials Science and

Engineering, vol.25 ,pp. 509–515, 2005.

7- S. Salehi, and M.H. Fathi "Fabrication andcharacterization of sol–gel derived

hydroxyapatite-zirconia compositenanopowders with various yttria contents"

Ceramics International, Vol. 36, pp. 1659–1667, 2010.

8- T. Kasuga, M. Yoshida, T. Uno and K.Nakajima "Preparation of zirconia-toughened

bioactive glass-ceramics", Vo. 23, pp. 2255-2258,1988.

9- T. Kasuga and K. Nakajima "NewlyDeveloped Bioactive Glass-Ceramic CompositToughened by Tetragonal Zirconia"

Clinical Materials, Vol. 4, pp 285-294, 1989.

10- E. Verne, R. Defilippi, G Carl, C. VitaleBrovarone, and P. Appendino, "Viscous flow

sintering of bioactive glass-ceramiccomposites toughened by zirconia particles",

Journal of the European Ceramic Society,Vol.23, pp. 675–683, 2003.

11- S. Radice, P. Kern, G. Bu¨ rki, J. Michler,and M. Textor "Electrophoretic deposition of

zirconia-Bioglass composite coatings forbiomedical implants" Journal of Biomedical

Materials Research Part A, Vol. 82 , pp. 436–444, 2003.

12- م. مختـاریمهـر، م.ح. شـریعت و م. پـاکشـیر، " بررسـیخاصیت فتوکاتالیستی لایه نازک V doped TiO2تهیه شـده

با روش سل-ژل"مجله مواد نوین، جلد2، شـماره3، ص25-21،بهار 1391.

13- ا. نکوبین، ا. انصاری پور جرم افشاری و هومن چویلیـان، "ساخت حسگر گاز CO2/O2 بااستفاده از لایه نازک اکسید روی

سنتز شده به روش سل- ژل"مجله مواد نوین، جلد 2، شماره4،.1391تابستان ،66-59 ص

14- L.L. Hench and J. Wilson, "AnIntroduction to Bioceramics", World Scientific

Publishing Co., 1993.

15- P. Galliano, J. José, D. Damborenea, M.JesúsPascual and A. Durán "Sol-Gel Coatings

on 316L Steel for Clinical Applications"Journal of Sol-Gel Science and Technology,

Vol. 13, pp. 723–727, 1998.

16- Available from: URL:http://www.usnano.com

 

17- M.H. Fathi, and A. Doostmohammadi,"Bioactive glass nanopowder and bioglass

coating for biocompatibility improvement ofmetallic implant", journal of materials

processing technology, Vol.209 , pp. 1385–1391, 2009.

18- M.M. Sebdani, and M.H. Fathi "Novelhydroxyapatite – forsterite–

bioglassnanocomposite coatings withimproved mechanical properties" Journal of

Alloys and Compounds, Vol. 509, pp. 2273–2276, 2011.

19- M. Simões, B.G. Odı́lio, L. Assis, and A.Avaca, “Some properties of protective sol–gel

glass coatings on sintered stainless steels”Vol273, pp. 159–163, 2000.

20-M. Menning, C. Schelle, A. Duran, J.J.Damborena, M. Guglielmi and G.

Brusatin“Investigation of Glass-Like Sol-GelCoatings for Corrosion Protection of Stainless

Steel Against Liquid and Gaseous Attack”Journal of Sol-Gel Science and Technology,

Vo 13, pp.717-722, 1998.

21- M. Fallet, H. Mahdjub, and B. Gautier,“Electrochemical behavior of ceramic sol-gel

coating on mild steel”, Journal of NonCrystallineSolids, Vol. 294, pp. 527-533,

2001.

22- D.C.L. Vasconcelos, J.A.N. Carvalho, M.Mantel, and W.L. Vasconcelos, “Corrosion

resistance of stainless steel coated with sol-gelsilica”, Journal of Non-Crystalline Solids, Vol.

273, pp. 135-139, 2000.

23- L.L. Hench, R.J. Jones, and P. Sepulveda,“Bioactive Materials for Tissue Engineering

Scaffolds“, Biomedical Materials Research,Vol. 28, pp. 685-695, 2000.

24- M.H. Fathi, and F. Azam "Novelhydroxyapatite-tantalum surface coating for

metallic dental implant" Materials Letters, Vol.61, pp.1238–1241, 2007.

25- M.H. Fathi, E. MohammadiZahrani, and. Zomorodian "Novel fluorapatite/niobium

composite coating for metallic human bodyimplants" Materials Letters, Vol. 63, pp. 1195–1198, 2009.

26- M. Razavi, M.H. Fathi, and M. Meratian

"Bio-corrosion behavior of magnesiumfluorapatitenanocompositefor biomedical

applications" Materials Letters, Vol. 64,pp.2487–2490, 2010.