Subject Areas : journal of New Materials

نازنین افسر کازرونی ¹ , محمد حسین شریعت ² , محمد ابراهیم بحرالعلوم ³ , سیف اله دهقانی ⁴ , فاطمه محزون ⁵ , تایماز جوزقی ⁶

1 - دانشجوی کارشناسی ارشد، مهندسی مواد، دانشگاه شیراز
2 - - استاد، مهندسی مواد، دانشگاه شیراز
3 - - استاد، مهندسی مواد، دانشگاه شیراز
4 - - استاد، دامپزشکی، دانشگاه شیراز
5 - دکترای مهندسی مواد، دانشگاه شیراز
6 - دانشجوی کارشناسی ارشد، مهندسی مواد، دانشگاه شیراز

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2011-03-21

Keywords:

References:

1- A. Shahryari., S. Omanovic., and J. A.Szpunar.,"Electrochemical formation of highly

pitting resistant passive films on a biomedicalgrade 316LVM” Materials Science and

Engineering C, Vol. 28, pp. 94–106, 2008.

2- H. Liang., B. Shi., A. Fairchild., and T.Cale., "Applications of plasma coatings in

artificial joints: an overview", Journal ofVacuum, Vol. 73, pp. 317–326, 2004.

3- C. Garcı´a., S. Cere´., A. Dura´n.,"Bioactive coatings prepared by sol–gel on

stainless steel 316L", Journal of NonCrystallineSolids, Vol. 348, pp. 218–224,

2004.

4- Amit Bandyopadhyay, Felix Espana, VamsiKrishna Balla, Susmita Bose, Yusuke Ohgami,

Neal M. Davie, "Influence of porosity onmechanical properties and in vivo responseof

Ti6Al4V implants", Acta Biomaterialia, Vol.6, pp. 1640–1648, 2010.

5- Y. Oshida., Bioscience., and Bioengineeringof Titanium Materials, 1st edition, Chapter 8, p.

217-245, Elsevier, Oxford, 2007.

6- W, Xue., X, Liu., X, Zheng., Ch. Ding., "Invivo evaluation of plasma-sprayed titanium

coating after alkali modification",Biomaterials, Vol. 26,3029–3037, 2005.

7- A. L. Yerokhin., A. Leyland., C. Tsotsos.,A. D. Wilson., X. Nie., and A. Matthews.,

"Duplex surface treatments combining plasmaelectrolytic nitrocarburising and plasmaimmersion

ion-assisted deposition", Surfaceand Coating Technology, Vol. 142–144, pp.

1129–1136, 2001.

8- A. L. Yerokhin., X. Nie., A. Leyland., A.Matthews., and S. J. Dowey., "Plasma

Electrolysis for surface enginering ", Surfaceand Coating Technology, Vol. 122, pp. 73–93,

1999.

9- P. Gupta., G. Tenhundfeld., E.O. Daigle., D.Ryabkov., "Electrolytic plasma technology:

Science and engineering—An overview",Journal of Surface and Coating Technology,

Vol. 201, pp. 8746–8760, 2007.

10- M.A. Béjar., R. Henriquez., "Surfacehardening of steel by plasma-electrolysis

boronizing", Journal of Material and Design,Vol. 30, pp. 1726–1728, 2009.

11- M. Aliofkhazraei., A. SabourRouhaghdama., A. Heydarzadeh., and H.

Elmkhaha., "Nanostructured layer formed onCP-Ti by plasma electrolysis (effect of voltage

and duty cycle of cathodic/anodic direction)",Materials Chemistry and Physics, Vol. 113, pp.

607–612, 2009.

12- N. Tsuji., S. Tanaka., and T. Takasugi.,"Effects of combined plasma-carburizing and

shot-peening on fatigue and wear properties ofTi–6Al–4V alloy", Surface and CoatingTechnology, Vol. 203, pp. 1400–1405, 2009.

13- M. Aliofkhazraei., C. Morillo., R.Miresmaeili., and A. Sabour Rouhaghdam.,

"Carburizing of low-melting-point metals bypulsed nanocrystalline plasma electrolytic

carburizing", Surface and Coating Technology,Vol. 202, pp. 5493–5496, 2008.

14- X. Nie., C. Tsotsos., A. Wilson., A.L.Yerokhin., A. Leyland., and A. Matthews.,

"Characteristics of a plasma electrolyticnitrocarburising treatment for stainless steels",

Surface and Coating Technology, Vol. 139-142, pp. 135-142, 2001.

15- F. Mahzoon., M. E. Bahrololoom., andS. Javadpour., "Optimization of a novel

bath for plasma electrolyticnitrocarburizing of 316L stainless steel and

study of tribological properties of thetreated steel surfaces", Surface

Engineering, Vol. 25 (8), pp. 628-633,2009.

16- G. Jiang., Quian Peng., Cong Li., YingWang., Jian Gao., Shu Yuan Chen., Jun 

Wang., Bao-luo Shen., "Effect of DCplasma nitriding temperature on

microstructure and dry-sliding wearproperties of 316L stainless steel", Surface

and Coating Technology, Vol. 202, pp.2749-2754, 2008.