References:
1- T-J.Mroz Jr, "Annual Materials Review:Aluminum Nitride", Am. Ceram. Soc. Bull,
Vol. 71[5], pp. 782-786, 1992.
2- L.M. Sheppard and M. Laurel, "AluminumNitride: A Versatile but Challenging Material",
Am. Ceram. Soc. Bull, Vol. 69[11], pp. 1801-1812, 1990.
3- Y. Kurokawa, K. Utsumi and H.Takamizawa, "Development and Microstructural
Characterization of High-ThermalConductivityAluminum Nitride Ceramics", J.
Am. Ceram. Soc, Vol. 71[7], pp. 588-594,1988.
4- Z.C. Jou and A.V. Virkar, "HighTemperatureCreep and Cavitation of
Polycrystalline Aluminum Nitride", J. Am.Ceram. Soc, Vol. 73[7], pp. 1928-1935, 1990.
5- C.K. Unni and D.E. Gordon, "MechanicalProperties of Monolithic AlN and SiCw/AlN
Composites", J. Mater. Sci, Vol. 30, pp. 1173-, 1995.
6- A. Zangvil and R. Ruh, "Phase Relationshipin the Silicon Carbide-Aluminum nitride
System", J. Am. Ceram. Soc, Vol. 71, pp. 884-890, 1988.
7- R.N. Katz, "High Temperature StructuralCeramics", Science, Vol. 208, pp. 841-847,
1980.
8- K. Itatani, R. Tsukamoto, A.C.A. Delsing,H.T. Hintzen and I. Okada, "Preparation of
Aluminum Nitride-Silicon CarbideNanocomposite powder by the Nitridation of
Aluminum Silicon Carbide", J. Am. Ceram.Soc, Vol. 85[7], pp. 1894-1896, 2002.
9- L. Mei and J.T. Li, "Synthesis of AlN-SiCSolid Solution Through Nitriding Combustion
of Al-C-Si3N4 in Air", Acta Mater, Vol. 56, pp.3543-3549, 2008.
10- I.B. Cutler, P.D. Miller, W. Rafaniello,H.K. Park, D.P. Thompson and K.H. Jack,
"New Materials in the Si-C-Al-O-N andRelated Systems", Nature, Vol. 275[5679], pp.
434-435, 1978.
11- R. Ruh and A. Zangvil, "Composition andProperties of Hot-Pressed SiC-AlN Solid
Solution", J. Am. Ceram. Soc, Vol. 65[5], pp.260-265, 1982.
12- H. Xue and Z.A. Munir, "The Synthesis ofComposites and Solid Solutions of α-SiC-AlN
by field-Activared Combustion", Scr. Mater,Vol. 35, pp. 979-982, 1996.
13- J. Subrahmanyam and M. Vijaykumar,"Review, Self-Propagating High-Temperature
Synthesis", J. Mater. Sci., Vol. 27, pp. 6249-6273, 1992.
14- H. Xue and Z.A. Munir, "Synthesis ofAlN-SiC Composites and Solid Solution by
Field-Activated Self-PropagatingCombustion", J. Eur. Ceram. Soc., Vol. 17, pp.
1787-1792, 1997.
15- M. Ohyanagi, N. Balandina, K. Shirai, M.Kiozumi and Z.A. Munir, "Synthesis of AlNSiC
Solid Solution by CombustionNitridation", pp. 3-12 in Ceramic
Transactions,Vol. 94, 1998.
16- D.E. Clark, I. Ahmad and R.C. Dalton,"Microwave Ignition and Combustion
Synthesis of Composites", Mater. Sci.Eng.,Vol. A144, pp. 91-97, 1991.
17- J.J. Moore and H.J. Feng, "CombustionSynthesis of Advanced Materials: Part I .
Reaction Parameters" , Prog. Mater. Sci., Vol.39, pp. 243-273, 1995.
18- R.C. Juang, C.C. Chen, J.C. Kuo, T.Y.Huang and Y.Y. Li, "Combustion Synthesis of
Hexagonal AlN-SiC Solid Solution Under LowNitrogen Pressure", J. Alloys Compd., Vol.
480, pp. 928-933, 2009.
19- E. Hagen, T. Grande, M.A. Einarsrud,"Preparation and Properties of Porous
Aluminum Nitride-Silicon Carbide Composite
Ceramics", J. Am. Ceram. Soc., Vol. 87[7], pp.1200-1204, 2004.
20- C. Kexin, J. Haibo, H.P. Zhou and J.M.F.Ferreira, "Combustion Synthesis of AlN-SiC
Solid Solution Particles", J. Eur. Ceram. Soc.,Vol. 20, pp. 2601-2606, 2000.
21- P. Shen, W. Sun, B. Zou, L. Zhan and Q.Jiang, "Al Content Dependence of Reaction
Behaviors and Mechanism in CombustionSynthesis of TiB2-AlN-Based Composites",Chem. Eng. J., 150: 261-268 (2009).
22- O. Knacke, O. Kubaschewski and K.Hesselman, "Thermodynamical Properties of
Inorganic Substances", 2nd
ed., SpringerVerlag,1991.
23- D. Kata, K. Shirai and M. Ohyanagi,"Formation Mechanism of AlN-SiC Solid
Solution by Combustion Nitridation in Si3N4-Si-Al-C System", J. Am. Ceram. Soc., Vol.
84[4], pp. 726-732, 2001.
