References:
1- T. S. N.Sankara Narayanan, “Surfacepretreatment by phosphate conversion coatinga
review”, National Metallurgy Laboratory,India, 9, 130-17, 2005.
2- W. Rausch, “The phosphating of Metals”,ASM International, 434-365, 1990.
3- N. L. yuan, “Cathodic phosphate coatingcontaining nano zinc particles on magnesium
alloy”, Trans. Nonferrous Met. Soc. China, 18,365-368, 2008.
4- M. C. M.Farias, C.A. L.Santos, Z.panossian, A.Sinatora, “Fricion behavior of
lubricated Zinc Phosphate coatings”, Wear,266, 873-877, 2009.
5- Metals handbook, 9th Ed, vol. 5, pp: 379-404.
6- G. Song, “Electroless deposition of a prefilmof electrophoresis coating and its
corrosion resistance on an Mg alloy”,Electrochimica Acta, 55, 2258–2268, 2010 .
7- M. Manna, “Characterisation of phosphatecoatings obtained using nitric acid free
phosphate solution on three steel substrates:An option to simulate TMT rebars surfaces”,
Surface & Coatings Technology, 203, 1913–1918, 2009 .
8- P. E. Tegehall, and N. G. Vanerberg,“Nucleation and formation of zinc phosphate
conversion coating on cold-rolled steel”,Corrosion Science, 32, 635-652, 1991.
9- C. T. Yap, T. L. Tan, L. M. Gan,“Evaluation of zinc phosphate coating on cold
rolled steel surface by X-Ray fluorescencetechnique”, Apllied Surface Science, 27, 247-
254, 1986.
10- D. Susaca, X. Suna, R. Y. Lia, K. C.Wonga, P. C. Wonga, K. A. R.Mitchella, R.
Champaneria, “Microstructural effects on theinitiation of zinc phosphate coatings on 2024-
T3 aluminum alloy”, Applied Surface Science,
239, 45–59, 2004.
11- T. Biestek and j. Weber, “Electrolytic andchemical conversion coatings, A concise
surrey of their production, properties andtesting” Wgdawnictwa Naukowo Technicane, ,
128-224, 1976.
12- S. Jegannathana, T.K. Arumugama, T. S.N.Sankara, K. Ravichandranc, “Formation and
characteristics of zinc phosphate coatingsobtained by electrochemical treatment:
Cathodic vs. anodic”, Progress in OrganicCoatings, 65, 229–236, 2009 .
13- S. Jegannathan, T.S.N. Sankara, K.Ravichandran, S. Rajeswari, “Formation of
zinc phosphate coating by anodicelectrochemical treatment”, Surface &
Coatings Technology, 200, 6014–6021, 2006.
14- F. Mansfeld, J. B. lumsden, S. L. J.jaquet& S. Tsai, “Corrosion control by organic
coatings”, publisher: NACE NationalAssociation of Corrosion Engineers, 227-273,
1989.
15- J. K. Yang, J. G. Kim, J. S. Chun, “A studyof the effect of ultrasonics on manganese
phosphating of steel”, Thin Solid Films, 101,193-200, 1983.
16- W. J. Wittke, “Phosphate coating”, MetalFinishing, 576-620, 1980.
17- S. Scislowski, “phosphating, part II-TotalAcid, free Acid and pH”, Metal Finishing, 84,
35-40, 1991.
18- Din-50942, “Phosphating of metals”, 1987.
19- L. A. Isaicheva, N. M. Trepak, A. L.L’vov, “The kinetics of phosphate film
formation on the type MA 21 magnesium–Lithium Alloys”, Protection of Metals, 42,
389–393, 2006.
20- E. L. Ghali, R. J. A. Potvin, “Themechanism of phosphating of steel”, CorrosionScience, 12 583-594, 1972.
21- G. Y. Li, J. S. Lianand, L. Y. Niu, “Growthof zinc phosphate coatings on AZ91Dmagnesium alloy”, Surface & CoatingsTechnology, 201 1814–1820, 2006.
22- L. Y. Niu, Z. H. Jiang, G. Y. Li, C. D. Gu,J. S. Lian, “A study and application of zinc
phosphate coating on AZ91D magnesiumalloy”, Surface & Coatings Technology, 200,
3021– 3026, 2006.
13- M. Sheng, Ch. Wanga, Q. Zhong, Y. Wei,Y. Wang, “Ultrasonic irradiation and its
application for improving the corrosionresistance of phosphate coatings on aluminum
alloys”, Ultrasonics Sonochemistry, 17, 21–25,2010.
24- E. P. Banczek, P. R. P.Rodrigues, I. Costa,“Investigation on the effect of benzotriazole on
the phosphating of carbon steel”, Surface &Coatings Technology, 201, 3701–3708, 2006.
25- Ch. M. Wang, H. Ch. Liau, W. T. Tsai,“Effects of temperature and applied potential
on the micro structure and electrochemicalbehavior of manganes phosphate coating”,
Surface & Coatings Technology, 201, 2994-3001, 2006.
26- Sh. L. Zhang, “The growth of zincphosphate coatings on 6061-Al alloy”, Surface
& Coatings Technology, 202, 1674-1680,2008.
27- B. Cheng, “Studies of phosphateconversion coatings on pure aluminium”, the
university of Western Ontario London,Department of chemistry, 1996.
28- CH. Ying-liang, W. Hai-lan, CH. Zhenhua,W. Hui-min, “Phosphating process of
AZ31 magnesium alloy and corrosionresistance of coatings”, Trans. NonferrousMet. SOCC. Hina, 16, 1086-1091, 2006.
29- L. Kouisnia, M. Azzia, F. Dalardb, S.Maximovitch, “Phosphate coatings on
magnesium alloy AM60 Part 2:Electrochemical behaviour in borate buffer
solution”, Surface & Coatings Technology,192, 239– 246, 2005 .
30- N. Satoh and T. Minami, “Relationshipbeween the formation of zinc phosphate
crystals and their electrochemical properties”,Surface and Coating Technology, 34, 331-343,. 1988.
