The finite element analysis of applying the controlling pouer on the surface transformation hardening in the vicinity of discontinuity in the workpiece depth

Subject Areas : journal of New Materials

A. Khajeh ¹ , S. A. Jenabali Jahromi ² , H. Danesh Manesh ³

1 - دانشجوی دکتری، بخش مهندسی مواد، دانشکده مهندسی، دانشگاه شیراز، شیراز، ایران
2 - استاد، بخش مهندسی مواد، دانشکده مهندسی، دانشگاه شیراز، شیراز، ایران
3 - دانشیار، بخش مهندسی مواد، دانشکده مهندسی، دانشگاه شیراز، شیراز، ایران

Received: 2017-02-11 Accepted : 2017-02-11 Published : 2017-01-20

Keywords: Finite element analysis, Phase transformations, Continuous cooling, Kinetic model,

Abstract :

In the present research, the finite element analysis of the surface transformation hardening in the vicinity of workpiece discontinuity was performed both thermally and metallurgically using ABAQUS finite element software. In order to predict the volume fraction of the obtained phases and the hardness profile during continuous cooling stage, the appropriate user-defined subroutine based on the Kirkaldy kinetic model was employed in the data flow of the software. Besides the effects of different controlling strategies and the application of a quenching medium at the discontinuity surface was investigated. Based on the obtained results, these strategies which are based on controlling the input power and travelling speed of the heat source as a function of the maximum temperature at the surface, allows for gaining a more uniform thermal history at the surface. However, as these strategies could not control the cooling rate in the vicinity of discontinuities, applying a quenching medium with an optimum cooling power is essential in order to achieve a uniform hardened layer at the workpiece depth.

References:

J. C. Ion, Laser Processing of Engineering Materials: Principles, Procedure and Industrial Application, Oxford: Butterworth-Heinemann, 2005, pp. 15-23.

N. B. Dahotre, Surface engineering series, volume 1, OH: ASM International, 1998.

J. D. Majumdar and I. Manna, Laser processing of materials, vol. 28, 2003, p. 495–562.

C. Li, Y. Wang, Z. Zang, B. Han and T. Han, "Influence of overlapping ratio on hardness and residual stress distributions in multi-track laser surface melting roller steel," Optics and Lasers in Engineering, vol. 48, no. 12, pp. 1224-1230, 2010.

N. S. Bailey, W. Tan and Y. C. Shin, "Predictive modeling and experimental results for residual stresses in laser hardening of AISI 4140 steel by a high power diode laser," Surface and Coating Technology, vol. 203, no. 14, pp. 2003-2012, 2009.

M. F. Ashby and K. E. Easterling, "The transformation hardening of steel surfaces by laser beams—I. Hypo-eutectoid steels," Acta Metallurgica, vol. 32, no. 11, p. 1935–1937, 1984.

T. W. Eagar and N. S. Tsai, "Temperature fields produced by traveling distributed heat sources," Welding Journal, vol. 62, no. 12, p. 346–355, 1983.

K. S. Bo and H. S. Cho, "Transient temperature distribution in arc welding of finite thickness plates," in Proceedings of the Institution of Mechanical Engineers, Part B: Engineering Manufacture, 204B3, p. 175–183, 1990.

S. M. Zubair and M. A. Chaudhry, "Heat conduction in a semi-infinite solid when subjected to spatially decaying instantaneous laser source," Wärme - und Stoffübertragung, vol. 28, no. 7, pp. 425-431, 1993.

M. K. Al-Adawi, M. A. Abdel-Naby and S. A. Shalaby, "Laser heating of a two-layer system with constant surface absorption: an exact solution," International Journal of Heat and Mass Transfer, vol. 38, no. 5, p. 947–952, 1995.

J. C. Rozzi, F. E. Pfefferkorn, F. P. Incropera and Y. C. Shin, "Transient thermal response of a rotating cylindrical silicon nitride workpiece subjected to a translating laser heat source, part II: parametric effects and assessment of a simplified model," ASME Journal of Heat Transfer, vol. 120, no. 4, p. 899–906, 1998.

N. T. Nguyen, A. Otha, K. Matsuoka, N. Suzuki and Y. Maeda, "Analytic solutions for transient temperature of semi-infinite body subjected to 3-D moving heat sources," Welding Journal, vol. 78, p. 265s–274s, 1999.

R. C. Reed and K. H. Bhadeshia, "A simple model for multipass steel welds," Acta Metallurgica et Materialia, vol. 42, no. 11, p. 3663–3678, 1994.

K. Mundra, T. DebRoy and K. M. Kelkar, "Numerical prediction of fluid flow and heat transfer in welding with a moving heat source," Numerical Heat Transfer, Part A: Applications: An International Journal of Computation and Methodology, vol. 29, no. 2, p. 115–129, 1996.

W. Jiang, K. Yahiaoui and F. R. Hall, "Finite element predictions of temperature distributions in a multipass welded piping branch junction," Journal of Pressure Vessels Technology, vol. 127, no. 1, p. 7–12, 2005.

R. Patwa and Y. C. Shin, "Predictive modeling of laser hardening of AISI5150H steels," International Journal of Machine Tools and Manufacture, vol. 47, no. 2, p. 307–320, 2007.

F. Kong, S. Santhanakrishnan, D. Lin and R. Kovacevic, "Modeling of temperature field and grain growth of a dual phase steel DP980 in direct diode laser heat treatment," Journal of Materials Processing Technology, vol. 209, no. 18-19, p. 5996–6003, 2009.

G. Fribourg, A. Deschampsa, Y. Brecheta, G. Mylonasb, G. Labeasb, U. Heckenbergerc and M. Perezd, "Microstructure modifications induced by a laser surface treatment in an AA7449 aluminium alloy," Materials Science and Engineering: A, vol. 528, no. 6, p. 2736–2747, 2011.

S. A. Jenabali Jahromi, A. Khajeh and B. Mahmoudi, "Effect of different pre-heat treatment processes on the hardness of AISI 410 martensitic stainless steels surface-treated using pulsed neodymium-doped yttrium aluminum garnet laser," Materials and Design, vol. 34, pp. 857-862, 2012.

B. Mahmoudi, A. Khajeh, M. J. Torkamany and S. A. Jenabali Jahromi, "The effect of microstructure before laser surface treatment on AISI410: martensitic stainless steel," Science of Advanced Materials, vol. 4, pp. 518-521, 2012.

B. Mahmoudi, M. J. Torkamany, A. R. Sabour Rouh Aghdam and J. Sabbaghzade, "Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd:YAG laser," Materials and Design, vol. 31, p. 2553–2560, 2010.

B. V. Krishna and A. Bandyopadhyay, "Surface modification of AISI 410 stainless steel using laser engineered net shaping (LENSTM)," Materials and Design, vol. 30, no. 5, p. 1490–1496, 2009.

J. Radziejewska, "Influence of laser-mechanical treatment on surface topography, erosive wear and contact stiffness," Materials and Design, vol. 32, no. 10, p. 5073–5081, 2011.

C. Yao, B. Xu, J. Huang, P. Zhang and Y. Wu, "Study on the softening in overlapping zone by laser-overlapping scanning surface hardening for carbon and alloyed steel," Optics and lasers in engineering, vol. 48, no. 1, pp. 20-26, 2010.

A. N. Samanta, B. Dua, S. R. Paital, S. Kumarc and N. B. Dahotrea, "Pulsed laser surface treatment of magnesium alloy: Correlation between thermal model and experimental observations," Journal of Materials Processing Technology, vol. 209, no. 11, p. 5060–5067, 2009.

A. Chehrghania, M. J. Torkamany, M. J. Hamedi and J. Sabbaghzadeh, "Numerical modeling and experimental investigation of TiC formation on titanium surface pre-coated by graphite under pulsed laser irradiation," Applied Surface Science, vol. 258, no. 6, p. 2068–2076, 2012.

W. Piekarska, M. Kubiak and A. Bokota, "Numerical simulation of thermal phenomena and phase transformations in laser-arc hybrid welded joints," Archives of Metallurgy and Materials, vol. 56, no. 2, pp. 409-426, 2011.

W. Piekarska, M. Kubiak and Z. Saternus, "Application of Abaqus to analysis of the temperature field in elements heated by moving heat sources," Archives of Foundry Engineering, vol. 10, no. 4, pp. 177-182, 2010.

J. Caron, C. Heinze, C. Schwenk, M. Rethmeier, S. S. Babu and J. Lippold, "Effect of continuous cooling transformation variations on numerical calculation of welding-induced residual stresses," Welding Research, vol. 89, no. 1, pp. 151-160, 2010.

P. L. Masson, T. Loulou, E. Artioukhine, P. Rogeon, D. Carron and J. Quemener, "A numerical study for the estimation of a convection heat transfer coefficient during a metallurgical “Jominy end-quench” test," International Journal of Thermal Sciences, vol. 41, no. 6, p. 517–527, 2002.

W. Piekarska, M. Kubiak and Z. Saternus, "Numerical modeling of thermal and structural strain in laser welding process," Archives of Metallurgy and Materials, vol. 57, no. 4, pp. 1219-1227, 2012.

M. Kalyona and B. S. Yilbasa, "Laser pulse heating: a formulation of desired temperature at the surface," Optics and Lasers in Engineering, vol. 39, no. 1, p. 109–119, 2003.

J. S. Kirkaldy and D. Venugopalan, "Prediction of microstructure and hardenability in low-alloy steels," in Phase Transformations in Ferrous Alloys, Proceedings of the International Conference, Philadelphia, 1983.

J. S. Kirkaldy and R. C. Sharma, "A new phenomenology for steel IT and CCT curves," Scripta Metallurgica, vol. 16, no. 10, p. 1193–1198, 1982.

A. S. Oddy, J. M. J. McDill and L. Karlsson, "Microstructural predictions including arbitrary thermal histories, reaustenization and carbon segregation effects," Canadian Metallurgical Quarterly, vol. 35, no. 3, p. 275–283, 1996.

J. S. Kirkaldy, "Diffusion-controlled phase transformation in steels," Scandinavian Journal of Metallurgy, vol. 20, p. 50–61, 1991.

J. S. Kirkaldy, "Prediction of alloy hardenability from thermodynamic and kinetic data," Metallurgical Transactions, vol. 4, p. 2327–2333, 1973.

H. E. Boyer, Ed., Atlas of Isothermal Transformation and Cooling Transformation Diagrams, Metals Park, Ohio: Americal Society for Metal, 1977.

D. P. Koistinen and R. E. Marburger, "A general equation prescribing the extent of the austenite-martensite transformation in pure iron-carbon alloys and plain carbon steels," Acta Metallurgica, vol. 7, no. 1, p. 59–60, 1957.

W. C. Leslie, The Physical Metallurgy of Steels, New York: McGraw-Hill, 1981.

K. W. Andrews, "Empirical formulae for the calculation of some transformation temperatures," Journal of the Iron and Steel Institute, vol. 203, p. 721– 727, 1965.

P. Maynier, B. Jungmann and J. Dollet, "Creusot-Loire System for the prediction of the mechanical properties of low alloy steel products," in Hardenability Concepts with Applications to Steel, The Metallurgical Society of AIME, Chicago, 1978.