Synthesis and Characterization of ZnO Nanocrystal Composites with High Surface Area Supported on Silica-Alumina Matrix by Sol-gel
Subject Areas : journal of New MaterialsA. Heidary 1 , M. Jafari 2 , A. S.Teluri 3
1 - دانشجوی کارشناسی ارشد، دانشگاه آزاد اسلامی، واحد نجف آباد، دانشکده مهندسی مواد، نجف آباد ایران.
2 - عضو هیئت علمی، دانشگاه آزاد اسلامی، واحد نجف آباد، دانشکده مهندسی مواد، نجف آباد ایران.
3 - عضو هیئت علمی، دانشگاه آزاد اسلامی، واحد نجف آباد، دانشکده مهندسی مواد، نجف آباد ایران.
Keywords: ZnO, SiO2 -Al2O3, composite, Nanocrystaline, Sol-Gel,
Abstract :
In this paper, the microstructural characteristics of ternary ceramic powders Al2O3-SiO2-ZnO system prepared by sol-gel method, in order to increase surface area of ZnO nanocrystals supported on silica-alumina matrix, have been studied. Values of 20, 50 and 70 weight percents of zinc oxide with an equal weight ratio of SiO2-Al2O3, using simultaneous reaction of zinc nitrate (Zn(NO3)2.6H2O), tetraethyl orthosilicate, (TEOS) and aluminum nitrate(Al(NO3)3.9H2O) were synthesized. The nanostructure of prepared composites were characterized by X-ray diffraction, SEM/EDS and BET studies. The results showed that crystaline phase zinc oxide has been formed in amorphous silica-alumina matrix, which led to reducing zinc oxide particles size, preventaing of aglomeration and increasing specific surface.
1 - D. L. Li, L. B. Kong, L. Y. Zhang, and X.
Yao, “Sol-Gel Preparation and
Characterization of Transparent KTiOPO4/
SiO2 Nanocomposite Glass for Second
Harmonic Generation”, Journal of NonCrystalline Solids, Vol. 271, pp. 45–55, 2000.
2 - Y. S. Chang, Y. H. Chang, I. G. Chen, G. J.
Chen and Y. L. Chai, “Synthesis and
Characterization of Zinc Titanate Nano-Crystal
Powders by Sol-Gel Technique”, Journal of
Crystal Growth, Vol. 243, pp. 319–326, 2002.
3- E. M. Gama, A. S. Lima, and V. A. Lemos,
“Preconcentration System for Cadmium and
Lead Determination in Environmental Samples
Using Polyurethane Foam/Me-BTANC”,
Journal of Hazardous Materials, Vol. 136, pp.
757–762, 2006.
4- R. S. Amais, J. S. Ribeiro, M. G. Segatelli,
Tarley, “Assessment of Nanocomposite
Alumina Supported on Multi-Wall Carbon
Nanotubes as Sorbent for On-Line Nickel
Preconcentration in Water Samples”,
Separation and Purification Technology, Vol.
58, pp. 122–128, 2007.
5- T. P. Rao, R. Kala, S. Daniel, “Metal ionimprinted polymers-Novel Materials for
Selective Recognition of Inorganics”,
Analytica Chimica Acta, Vol. 578, pp. 105–
116, 2006.
6- C. R. T. Tarley, A. F. Barbosa, M. G.
Segatelli, E. C. Figueiredo, and P. O. Luccas,
“Highly Improved Sensitivity of TS-FF-AAS
for Cd(ii) Determination at Ng L-1 Levels
Using a Simple Flow Injection Minicolumn
Preconcentration System with Multiwall
Carbon Nanotubes”, Journal of Analytical
Atomic Spectrometr, Vol. 21, pp. 1305–1313,
2006.
7 - M. Etienne, and A. Walcarius, “Analytical
Investigation of the Chemical Reactivity and
Stability of Aminopropyl-Grafted Silica in
Aqueous Medium”, Talanta, Vol. 59, pp.
1173–1188, 2003.
8- J. Chandradass, and D. Bae, “Synthesis and
Characterization of Alumina Nanoparticles by
Igepal CO-520 Stabilized Reverse Micelle and
Sol-Gel Processing”, Materials and
Manufacturing Processes, Vol. 23, pp. 494-
498, 2008.
9- D. H. Yu, R. X. Cai, and Z. H. Liu, “Studies
on the Photodegradation of Rhodamine Dyes
on Nanometer-sized Zinc Oxide”,
Spectrochimica Acta A, Vol. 60, pp. 1617–
1624, 2004.
10- M. L. Curridal, R. Comparelli, P. D.
Cozzli, G. Mascolo, and A. Agostiano,
“Colloidal Oxide Nanoparticles for the
Photocatalytic Degradation of Organic Dye”,
Materials Science Engineering C, Vol. 23, pp.
285–289, 2003.
11- H. M. Lin, S. J. Tzeng, P. J. Hsiau, and W.
Properties of Nanocrystalline Zinc Oxide”,
Nanostructural Materials, Vol. 10, pp. 465–
477, 1998.
12- A. K. Li, and W. T. Wu, “Synthesis of
Monodispersed ZnO Nanoparticles and Their
Luminescent Properties”, Key Engineering
Materials, Vol. 247, pp. 405–410, 2003.
13 -ا .الصادق، تاثیر شرایط سنتز بر ریخت شناسی و اندازه
ذرات نانوساختارهای سیلیسی، مجله مواد نوین/ جلد2 شماره 4
زمستان 1390 .
14- R. Y. Hong, J. H. Li, L. L. Chen, D. Q.
Liu, H. Z. Li, Y. Zheng, and J. Ding,
“Synthesis, Surface Modification and
Photocatalytic Property of ZnO
Nanoparticles”, Powder Technology, Vol. 189,
15- X. Wang, T. Sun, J. Yang, L. Zhao, and J.
Jia, “Low-Temperature H2S Removal from
Gas Streams with SBA-15 Supported ZnO
Nanoparticles”, Chemical Engineering Journal,
Vol. 142, pp. 48–55, 2008.
16- Y. Lee, N. Park, G. Han, S. Ryu, T. Lee,
and C. Chang, “The Preparation and
Desulfurization of Nano-Size ZnO by a
Matrix-Assisted Method for the Removal of
Low Concentration of Sulfur Compounds”,
Current Applied Physics, Vol. 8, pp. 746–751,
2008.
17- E. Seker, “The Catalytic Reforming of
Bio-Ethanol over SiO2 Supported ZnO
Catalysts: The Role of ZnO Loading and the
Steam Reforming of Acetaldehyde”,
International Journal of Hydrogen Energy,
Vol. 33, pp. 2044–2052, 2008.
18- CH. M. Whang, CH. S. Yeo, and Y. H.
Kim, “Preparation and Characterization of SolGel Derived SiO2-TiO2-PDMS Composite
Films” .
19- S.A. El-Hakam, "Structure, texture and
catalytic activity of ZnO:Al2O3 catalysts".
Colloids and Surfaces A, Vol. 157, pp. 157-
166, 1999.
20- Radzig V.A., and Ischenko A.A, “Carbon
in silica”, Kinetics and Catalysis, Vol. 52, pp.
316–329, 2011.
21- Y. R. Katsobashvili, N. S. Kurkova, and
Composition of Aluminum Hydroxide and the
Physical Properties of Active Aluminum
Oxide”, Bulletin of the Academy of Sciences
of the USSR Division of Chemical Science,
Vol. 19, pp. 1003-1008, 1970.
22- A. B. Rosenthal, and S. H. Garofalini,
“Molecular dynamics Simulation of
Amorphouszinc Silicate”, Journal of NonCrystalline Solids, Vol. 87, pp. 254–262, 1986.
23- A. A. Rohani, A. Salehi, M. Tabrizi, S. A.
Manafi and A. Fardafshari, “Synthesis of ZnO
Nanostructures via Gel-Casting Method”,
World Academy of Science, Engineering and
Technology, Vol. 47, pp. 683–686, 2010.
24- C. Y. Tsay, and W. C. Lee, “Effect of
Dopants on the Structural, Optical and
Electrical Properties of Sol-gel Derived ZnO
Semiconductor Thin Films”, Current Applied
Physics, Vol. 13, pp. 60–65, 2013.
_||_