References:
1- J.Banhart, Manufacture, Characterizationand application of cellular metals and metal
foams, Prog. Mater. Sci., 46(2001), p. 559.
2- M.F. Ashby, A.G. Evans, N.A. Fleck, L.J.
Metal foams: A design guide, OxfordButterworth-Heinemann, 2000.
3- J. Elliot, Metal foam and method formaking, US Patent 2983597, 1961.
4- W.S. Fiedler, Method for making metalfoam bodies, US Patent 3214265, 1965.
5- P.W. Hardy and W. Peisker, Method fora lightweight foamed metal, USPatent 3300296, 1967.
6- L.M. Niebylski, C.P. Jarema and T.E. Lee,Reinforced foamed metal, US Patent 3940262,
1976.
7- J. Banhart, J. Baumeister, A. Melzer and M.Weber, Composite material component,
especially an optionally foamable die castmetal matrix composite component, is
produced, German Patent 19813176, 1999.
8- J. Baumeister, Methods for manufacturing foamable metal bodies, US Patent 5151246,
1992.
9- J.F. Pashak, Cellularized light metal, USPatent 2935396, 1960.
10- B.C. Allen, M.W. Mote and A.M. Sabroff,Method of making foamed metal, US Patent
3087807, 1963.
11- J.R. Kreigh and J.K. Gibson, Metalaggregatedproduct, US Patent 3055763, 1962.
12- H.A. Kuchek, Method for making porousmetallic article, US Patent 3236706, 1966.
13- A.E. Simone and L.J. Gibson, Aluminumfoams produced by liquid-state processes, Acta
Mater. 46, p. 3109, 1998.
14- B. Sosnik, Process for Making Foam-likeMass of Metal, US Patent 2434775, 1948.
15- K. Kitazono, E. Sato and K. Kuribayashi,Novel manufacturing of closed-cell aluminum
foam by accumulative roll-bonding, Scr.Mater., 50, p. 495, 2004.
16- F. Baumgartner, I. Duarte and J. Banhart,Industrialisation of P/M Foaming Process,
Adv. Eng. Mater., 2, p. 168, 2000.
17- S. Asavavisithchai and A.R. Kennedy,Effect of powder oxide content on the
expansion and stability of PM-route Al foams,J. Colloid Interface Sci., 297, p. 715, 2006.
18- S. Esmaeelzadeh, A. Simchi and D.Lehmhus, Effect of ceramic particle addition
on the foaming behavior, cell structure andmechanical properties of P/M AlSi7 foam,
Mater. Sci. Eng., A424, p. 290, 2006.
19- S. Akiyam, H. Ueno, K. Imagawa, A.Kitahara, S. Nagata, K. Morimoto and et al,
Foamed metal and method of producing same,US Patent 4713277, 1987.
20- S.E. Speed, Foaming of metal by thecatalyzed and controlled decomposition of
zirconium hydride and titanium hydride, USPatent 3981720, 1976.
21- F. Han, Z. Zhu, J. Gao and W. Song, Effectof oxidation treatment and surface filming on
hydrogen degassing from TiH2, Metall. Trans.B, 29, p. 1315, 1998.
22- A.R. Kennedy, The effect of TiH2 heattreatment on gas release and foaming in Al–
TiH2 preforms, Scr. Mater., 47, p. 763, 2002.
23- A.R. Kennedy and V.H. Lopez, Thedecomposition behavior of as-received and
oxidized TiH2 foaming agent powder, Mater.Sci. Eng., A357, p. 258, 2003.
24- B. Matiasevic-Lux, J. Banhart, S. Fiechter,O. Gorke and N. Wanderka, Modification of
Titanium Hydride for Improved AluminumFoam Manufacture, Acta Mater., 54, p. 1887,
2006.
25- Y. Saito, N. Tsuji, H. Utsunomiya, T.Sakai and R.G. Hong, Ultra-Fine Grained Bulk
Aluminum Produced by Accumulative RollBonding(ARB) Process, Scr. Mater.,
39(1998), p. 1221.
26- Y. Saito, H, Utsunomiya, N. Tsuji and TSakai, Novel Ultra-High Straining Process for
Bulk Materials, Development of theAccumulative Roll-Bonding (ARB) Process,
Acta mater., 47(1999), p. 579.
27- M. Alizadeh and M.H. Paydar, Fabricationof Al/SiCP composite strips by repeated rollbonding
(RRB) process, J. Alloys Compd.,(2009), p. 811.
28- C. Lu, K. Tieu and D. Wexler, Significantof bond strength in theaccumulative roll bonding process using nanosized
SiO2 particles, J. Mater. Process.Technol., 209(2009), p. 4830.
29- K. Kitazono, Y. Kikuchi, E. Sato and K.Kuribayashi, Anisotropic Compressive
Behaviour of Al-Mg Alloy FoamsManufactured through Accumulative RollBonding
Process, Mater. Lett., 61(2007), p.1771.
30- M. Alizadeh and M.H. Paydar, Study on the effect of presence of TiH2 particles on the
roll bonding behavior of aluminum alloy strips,Mater. Des., 30(2009), p. 82.
31- M. Eizadjou, H. Danesh Manesh and K.Janghorban, Investigation of roll bonding
between aluminum alloy strips, Mater. Des.,29(2008), p. 909.
32- P.K. Wright, D.A. Snow and C.K. Tay,Interfacial Conditions and Bond Strength in
Cold Pressure Welding by Rolling, Met.Technol., 5(1978), p. 24.
33- L.R. Vaidyanath, M.G. Nicholas andD.R. Milner, Pressure Welding by Rolling,
Br. Weld. J., 6(1959), p.13.
34- I. Duarte and J. Banhart, A Study ofAluminum Foam Formation- Kinetics and
Microstructure, Acta Mater., 48(2000), p.2349.
35- V. Gergely and T.W. Clyne, Drainage inStanding Liquid Metal Foams: Modelling and
Experimental Observations, Acta Mater.,52(2004), p. 3047.
,
حبیب دانشمنش
2