A Duble Quasi-sinusidal Waveform Elicitation From Matrix Converter Based on Orthogonal Strategy

Subject Areas : Renewable energy

Alireza Siadatan ¹ (Assistant Professor - Department of Electrical Eng., West Tehran Branch, Islamic Azad University, Tehran, Iran)
Ebrahim Afjei ² (Professor - Department of Electrical Eng., Shahid Beheshti University G.C., Tehran, Iran)
Hadi Aghazadeh ³ (PhD Condidate - Department of Electrical Eng., Shahid Beheshti University G.C., Tehran, Iran)

Received: 2016-09-04 Accepted : 2016-11-27 Published : 2017-01-20

Keywords: matrix converter, two-phase induction motor, orthogonal phase, AC/AC converter, switching strategy,

Abstract :

this paper has scrutinized an effective approach regarding to how to elicit double quasi-sinusoidal waveform with orthogonal angles that can be applicable for two-phase induction motors. Hither, to be more precisely declared that a switching strategy is proposed so that the provided voltages by Matrix Converter (MC) i.e., A and B phases have 90⁰ difference with each other. This switching strategy assists two-phase induction motors aimed at operating in appropriate state. As the created frequency in an important item for this motor, matrix converter can also undertake this function. It is worth mentioning that, the switching is somehow performed until bio-directional switches couldn’t be simultaneously triggered and withal taken place in the accurate switching order. Its related circuit in order to producing appropriate current and voltage has been tested considering MATLAB Simulink and experiment. The simulation result is extracted with respect to inductive and resistive load. Meantime, PWM method is carried out to extract experimental results that clearly show its effectual performance.

References:

[1] L. Empringham, P.W. Wheeler, J.C. Clare, "Bi-directional switch current commutation for matrix converter applications", In: Proc of the PEMC98, p. 242–7, 1998.

[2] T.L. Bonde, A.Y. Fadnis, D.R. Tutakane, "Simulation of two phase matrix converter for driving a two phase induction motor", International Conference on Smart Electric Grid (ISEG), pp. 1-6, 2014.

[3] C. Klumpner, P. Nielsen, I. Boldea, F. Blaabjerg, "New solutions for a low-cost power electronic building block for matrix converters", IEEE Transactions on Industrial Electronics, 49, pp. 336-344, 2002.

[4] K. Vinod, C.B. Ramesh, R.J. Raghuveer, "Experimental realization of matrix converter based induction motor drive under various abnormal voltage conditions", Int J Control, Automat Sys, 6, pp. 670–6, 2008.

[5] K. Sun, D. Zhou, L. Huang, K. Matsuse, "Compensation control of matrix converter fed induction motor drive under abnormal input voltage conditions", IAS 2004, pp. 623–30, 2004.

[6] M. Yang, H. Lipei, "A second order auto disturbance rejection controller for matrix converter fed induction motor drive", IPEMC, pp. 1964–7, 2009.

[7] L. Guohai, X. Xiao, T. Chenglong, Y. Guanxue, J. Yan, S. Yue, "Modified internal model control of induction motor variable frequency speed control system in v/f mode based on neural network generalized inverse", CCDC 2010, pp. 3170–4, 2010.

[8] D.G. Holmes, A. Kotsopoulos, "Variable Speed control of Single and Two Phase Induction Motors Using a Three Phase Voltage Source Inverter", Proc., IAS93, pp.613-620, 1991.

[9] L.M.C. MHANGO, G.K. CREIGHTON, "Novel two phase inverter-fed induction-motor drive", IEE Proc. B, 131, pp. 99-104, 19984.

[10] D.H. JANG, J.S. WON, "Voltage, frequency, and  phase difference angle control of PWM inverters-fed two-phase induction motors", ZEEE Trans. Power Electron, 9, pp. 377-383, 1994.

[11] L.M.C. MHANGO, G.K. CREIGHTON, "Novel two phase inverter-fed induction-motor drive", IEE Proc. B, 13, pp. 99-104, 1984.

[12] D.G. HOLMES, A. KOTSOPOULOS, "Variable speed control of single and two phase induction motors using a three phase voltage source inverter", IEEE Industrial Applications Society annual meeting conference records, pp. 613-620, 1993.

[13] J. RODRI, E. SILVA, F. BLAABJERG, P. WHEELER, J. CLARE, J. PONTT, "Matrix converter controlled with the direct transfer function approach: analysis, modelling and simulation", International Journal of Electronics, 92, pp. 63–85, 2005.

[14] W. Patrick, Wheeler, José Rodríguez, C. Jon, Clare,Lee Empringham, and Alejandro Weinstein, "Matrix Converters: A Technology Review", IEEE Trans. Industrial Electronic, 49, 2002.

[15] P.W. Wheeler, J.C. Clare, L. Empringham, M. Bland, K.G. Kerris, "Matrix converters: a vector controlled MCT matrix converter induction motor drive with minimized commutation times and enhanced waveform quality", IEEE Indus Appl Mag, pp. 59–65, 2004.

[16] T.F. Podlesak, D.C. Katsis, P.W. Wheeler, J.C. Clare, L. Empringham, M.A. Bland, "150-kVA vector controlled matrix converter induction motor drive", IEEE Trans Indus Appl, 41, pp. 841–847, 2005.

[17] V. Mihov, E. Dinkov, "AC-AC Power converter Overview and Application", Electronic, pp. 19–21, 2007.

[18] A. Alesina, M.G.B. Venturini, "Analysis and design of optimumamplitude nine-switch direct AC–AC converters", IEEE Trans. Power Electron., 4, pp. 101–112, 1989.

[19] A. Alesina, M. Venturini, "limits I M. optimumdesign of 9-switches direct PWM AC–AC converters", In Proc. IEEE PESC’88, pp. 1284–1291, 1988.

[20] D.G. Holmes, "A unified modulation algorithm for voltage and current source inverters based on ac - ac matrix converter theory, IEEE Trans. Industrial Electronic, 28, 1992.

[21] P.W. Wheeler, J.C. Clare, L. Empringham, M. Bland, K.G. Kerris, "Matrix converters: a vector controlled MCT matrix converter induction motor drive with minimized commutation times and enhanced waveform quality", IEEE Indus Appl Mag, pp. 59–65, 2004.

[22] H. Altun, S. Sünter, "Matrix converter induction motor drive:modelling, simulation and control", Electr Eng, 86, pp. 25–33, 2003.

[23] S.S. Ömür, "Implementation of a single-phase matrix converter induction motor drive", Electr Eng, 90, pp. 425–433, 2008.

[24] M. Venturini, A. Alesina, "The generalized transformer: a new bi-directional wave form frequency converter with continuously adjustable input power factor", IEEE PESC, pp. 242–252, 1980.

[25] Y. Kudoh, N. Otsuka, K. Mizutani, T. Morizane, "A novel single to two-phase matrix converter for driving a symmetrically designed two-phase induction motor", IEEE 10th International Conference, Power Electronics and Drive Systems (PEDS), pp. 1133-1138, 2013.

[26] A. Alesina, M.G.B. Venturini, "Analysis and design of optimumamplitude  nine-switch direct AC–AC converters", IEEE Trans. Power Electron., 4, 101–112, 1989.