Prediction of Flow Pattern in Surface Discharge of Negatively Buoyant Wastewater Compared with the Results from CORMIX Model

Subject Areas : Water and Environment

Mohsen  Saeedi ¹ (Professor, Department of Water and Environmental Engineering, School of Civil Engineering, Science and Technology University, Tehran, Iran. *(Corresponding Author))
Ozeair  Abessi ² (Assistant Professor, Department of Civil Engineering, Babol Noshirvani University of Technology, Babol, Iran.)
Arash  Aliabadi Farahani ³ (MSc. Student, Department of Civil and Environmental Engineering, Science and Technology University, Tehran, Iran.)

Received: 2010-09-16 Accepted : 2011-01-30 Published : 2016-11-21

Keywords: Surface Discharge, Negatively Buoyant Wastewater, Flow Pattern, CORMIX Model,

Abstract :

Background and Objective: Surface discharge of dense jet produced in coastal areas is considered as a common way for the disposal of brine in marine environment. Discharging flow patterns varies depending on the characteristic of discharge and receiving ambient water. Three flow patterns: free jet, shoreline attached jet and plume that have been reported in various field and laboratory studies are considered in this research. D-CORMIX is a computer simulation model that is used for the simulation of entrainment and mixing of negatively buoyant flow into water bodies. This model uses the principals of motion for bouyant flow to determin the flow patern in surface discharge. Thus, it seems that significant differences could be observed by comparing the experimental results of flow configurations for dense discharge using D-CORMIX. Method: D-CORMIX model was run for different discharge and ambient conditions. Same conditions simulated with a flume in a laboratory especially designed for the investigation of dense surface discharge from a rectangular channel. Results: The flow pattern predicted from running D-CORMIX model with laboratory observation was developed separately in non-dimensional diagrams in a way that vertical and horizontal cordinates showed the range of experimental conditions, to identify the area that each flow patern happens. Conclusion: Finanly, the differences between two diagrams and the reasons are discussed.

References:

منابع

1-      Jones, G., Nash, D., Doneker, L., and Jirka, H., 2007. Buoyant Surface Discharge into Water Bodies. I: Flow Classification and Prediction Methodology. J. Hydr. Engrg, ASCE, 133(9), pp.1010-1020.

2-      Jirka, G., Adams, E., and Stolzenbach, K., 1981. Properties of surface buoyant jets. J. of Hydraulics Div., ASCE, 106 (HY11).

3-      Kim D.G, Cho H.Y., 2006. Modeling the buoyant flow of heated water discharged from surface and submerged side outfalls in shallow and deep water with a cross flow. Environ Fluid Mech ,  6, pp.501–518.

4-      Chu, V. H., and Jirka, G. H., 1986. Chapter 25: Surface Buoyant Jets, Encyclopedia of Fluid Mechanics, Gulf Publishing Company, Houston, Texas.

5-      Abdelwahed, M.S.T., and Chu, V.H., 1981. Surface jets and surface plumes in cross-flows.  Technical Rep. No. 81-1, Fluid Mechanics Laboratory, McGill Univ., Montreal.

6-      Nash, J.D., and Jirka, G.H., 1995. Buoyant discharges in reversing ambient currents: Experimental investigation and prediction. Technical Rep., DeFrees Hydraulics Laboratory, Cornell Univ., Ithaca, N.Y. also published by Maryland Dept. of Natural Resources, Tech. Rep. No. CBWP-MANTA-TR-97-2, 1997.

7-      Fischer, H.B., List, E.J., Koh, C. Y., Imberger, J. and Brooks, N. H., 1979. Mixing in Inland and Coastal waters. Academic Press, Inc., Orlando, Florida.

8-      Jones, R.G., Nash, D.J., and Jirka, H.G., 1996. CORMIX3: An Experimental System for Mixing Zone Analysis and Prediction of Buoyant Surface Discharges, User manual. Office of science and technology, Environmental Protection Agency, Washington. 

9-      Wright, S.J., 1977. Mean behavior of buoyant jets in a crossflow. Journ. Hyd. Div., ASCE, Vol. 103, No. HY5, pp. 499-513.

10-  Doneker L.R., Jirka G.H., 1997. D-CORMIX continuos derge disposal mixing zpne water quality model laboratory and filed data validation study. U.S. environmental protection agency, Washington.

11-  Doneker, R.L., Jirka G.H., 2001. CORMIX-GI Systems for Mixing Zone Analysis of Brine Wastewater Disposal , Desalination, Vol 139, pp. 263-274

12-  Doneker, R.L., Nash, J.D., Jirka, G.H., 2004. Pollutant Transport and Mixing Zone Simulation of Sediment Density Currents. ASCE, Journal of Hydraulic Engineering, Vol. 130, No. 4, pp. 349-359.