Feasibility of zinc recovery from hot-filtrate cake (waste) as practical approach to resolve of environmental problems in zinc industry

Subject Areas : Waste Management

Mehdi Hosseini ¹ , Keivan Shayesteh ² , Vahid Vahid fard ³ , Pourya Abbasi ⁴

1 - Assistant Prof. in Analytical Chemistry, Department of Chemistry, Faculty of Basic Science, Ayatollah Boroujerdi University, Boroujerd, Iran. *(Corresponding Author)
2 - Assistant Prof. in Chemical Engineering, Department of Chemical Engineering, Faculty of Engineering & Technical, University of Mohaghegh Ardabili, Ardabil, Iran.
3 - Ms.C Student in Chemical Engineering, Department of Chemical Engineering, Faculty of Engineering & Technical, University of Mohaghegh Ardabili, Ardabil, Iran.
4 - Ms.C Student in Chemical Engineering, Department of Chemical Engineering, Faculty of Engineering & Technical, University of Mohaghegh Ardabili, Ardabil, Iran.

Received: 2019-01-12 Accepted : 2019-05-22 Published : 2022-09-23

Keywords: Cementation method, Hot-filtrate cake, Cobalt removal, Zinc production, Environmental problem dissolving,

Abstract :

Background and Objective: Cake from hot-filtrate of zinc production industries containing about 16-24% of zinc and harmful metals such as cobalt, which it releases to environment caused to the harmful effects. These pollutions are one of the main concerns of this industry so the goal of present work is cobalt impurity cementation method and reuse of zinc recovery. Material and Methodology: The work is containing three steps leaching of hot-filtrate cake, optimization of affective parameters on process using Response Surface Methodology (RSM) and removal of cobalt impurity. Using RSM necessary experiments was designed and finally optimum conditions were determined. Finding: Using Design of Expert (DOE) software parameters such as temperature, zinc powder amount, contact time and additive concentration of antimony trioxide were evaluated. Based on the obtained results, the most impressive are belonged to zinc powder amount, temperature, time and additive concentration, respectively. Optimum conditions for cobalt removal containing temperature of 84 C°, concentration of 12.74 g L-1 for zinc powder, contact time of 118 min and concentration of 22.28 mg L-1 were obtained. At these conditions, cobalt impurity amount is reached to the allowed limit for electrolysis process and can be recovery of zinc from obtained solution. Discussion & Conclusion:  Using cementation method about 75% of zinc in cake was recovery and cobalt impurity was removed and finally, obtained zinc solution was conducted to the zinc production route. Furthermore, addition of dissolving environmental problems from cake, recovery of zinc and cobalt from the point of economical was important.

References:

1. Selim, H. M., Amacher, M. C. Reactivity and transport of heavy metals in soils. CRC Press.


2. Hooda, P. 2010. Trace elements in soils. John Wiley & Sons.


3. Nikolaidis, C., and et al. 2010. Heavy metal pollution associated with an abandoned lead–zinc mine in the Kirki Region, NE Greece. Bulletin of environmental contamination and toxicology, Vol. 85, pp. 307-312.


4. Lew, R. W., 1994. The removal of cobalt from zinc sulphate electrolytes using the copper-antimoney process. University of British Columbia.


5. Moradi, S., Zn. 2005, Tehran: Iran University of Science & Technology.


6. Safarzadeh, M. S., and et al., 2011. Reductive leaching of cobalt from zinc plant purification residues. Hydrometallurgy, Vol.106, pp. 51-57.


7. Fattahi, A., Rashchi, F., Abkhoshk, E. 2016. Reductive leaching of zinc, cobalt and manganese from zinc plant residue. Hydrometallurgy, Vol. 161, pp. 185-192.


8. Bruins, M. R., Kapil, S., Oehme, F.W., Microbial resistance to metals in the environment. Ecotoxicology and environmental safety, Vol. 45, pp. 198-207.


9. Friedrich, B., Kruger, J., Mendez-Bernal, G. 2002. Alternative solution purification in the hydrometallurgical zinc production. Metalurgija, Vol. 8, pp. 85-101.


10. Makhloufi , , and et al.1998. Cementation of Ni²⁺ ions from acidic sulfate solutions onto a rotating zinc disc. Electrochimica acta, Vol. 43, pp. 3159-3164.


11. Tozawa, K., and et al. 1992. Comparison between purification processes for zinc leach solutions with arsenic and antimony trioxides. Hydrometallurgy, Vol. 30, pp. 445-461.


12. Nelson, A., and et al. 2000. The removal of cobalt from zinc electrolyte by cementation: a critical review.


13. Yang, D., and et al. 2006. Mechanism of cobalt removal from zinc sulfate solutions in the presence of cadmium. Hydrometallurgy, Vol. 81, pp. 62-66.


14. Van der Pas, V. 1995. A fundamental study of cobalt cementation with zinc dust in the presence of copper and antimony additives. University of British Columbia.


15. Dreher, T. M., and et al. 2001. The kinetics of cobalt removal by cementation from an industrial zinc electrolyte in the presence of Cu, Cd, Pb, Sb and Sn additives. Hydrometallurgy, Vol. 60, pp. 105-116.


16. Boyanov, B., Konareva, V., Kolev, N. Removal of cobalt and nickel from zinc sulphate solutions using activated cementation. Journal of Mining and Metallurgy, Section B: Metallurgy, Vol. 40, pp. 41-55.


17. Boyanov, B. S., Konareva, V.V. Kolev, N. K. 2004. Purification of zinc sulfate solutions from cobalt and nickel through activated cementation. Hydrometallurgy, Vol. 73, pp. 163-168.


18. Lu, J., Dreisinger, D., Cooper, W. 1997. Cobalt precipitation by reduction with sodium borohydride. Hydrometallurgy, Vol. 45, pp. 305-322.


19. Nelson, A., 1998. Novel activators in cobalt removal from zinc electrolyte by cementation, McGill University Montreal, PQ.


20. Raghavan, R., Mohanan, P., Verma, S. 1999. Modified zinc sulphate solution purification technique to obtain low levels of cobalt for the zinc electrowinning process. Hydrometallurgy, Vol. 51, pp. 187-206.


21. Nelson, A., Demopoulos, G., Houlachi, G. 2000. The effect of solution constituents and novel activators on cobalt cementation. Canadian metallurgical quarterly, Vol. 39, pp. 175-186.