Achieving the Principles of High Performance of Light Shelves Design in Educational Buildings

Subject Areas : Renewable Energy

bahare sadat nasiri ¹ (M.A, Architecture, Architecture Department, Faculty of Arts and Architecture, Science and Research Branch, Islamic Azad University, Tehran, Iran)
Mahnaz mahmoody zarandi ² (Associate Professor, Architecture Department, Faculty of Engineering, North Tehran Branch, Islamic Azad University, Tehran, Iran *(Corresponding Authours))

Received: 2017-04-26 Accepted : 2018-02-07 Published : 2020-04-20

Keywords: Light Shelf, Climatoligical Architecture, Diva software, Daylight, Educational Class,

Abstract :

Background and Objective: Given the current energy crisis, daylight gained considerable momentum in architectural designs. Apart from energy efficiency considerations, the importance of using daylight in educational spaces is due to the pivotal role of light in visual perception of students and quality of educational spaces. This article addressed light shelves as window attachments with effective role in desirably lighting a classroom. Given the function of light shelves in clear and sunny climates and high number of educational centers in Tehran, this geographic area was selected to be investigated. Method: This research was founded on data from previous studies to determine the suitable depth of interior and exterior light shelves for window day lighting in this city. In this quantitative study, six types of light shelves with different layouts and heights from the floor were defined, and Diva for Rhino was used for simulation. These six light shelf layouts were analyzed by this software to determine the best one for providing the optimum day lighting. Performance of the light shelves was tested through simulation and their effects on the amount of light in a simulated classroom were examined.  Findings: Results showed that all six light shelf layouts made the level of illumination bounce up and reduced energy consumption. Since the south side receives the most sunlight, south-facing light shelves are more efficient. Discussion and Conclusion: According to software simulations, the best results in terms of even illumination and glare reduction are achieved by using intermediate light shelves positioned 240 cm away from the floor (Type 1).

References:

1. Wohlfarth.H. Gates, K., 1985. The effects of color-psychodynamic environmental color and lighting modification of elementary schools on blood pressure and mood: A controlled study. International Journal of Biosocial Research, vol. 7, pp. 9–16.


2. Joarder, R., .Ahmed, N.,2009. A Simulation Assessment of the Height of Lightshelves to Enhance Daylighting Quality in Tropical Office Buildings under Overcast sky Conditions INP Dhaka. Bangladesh.


3. CIBSE, 1999.CIBSE Lighting Guide.LG10. Daylighting and window design. London. Chartered Institution


4. Ghabbaklo, Z., 2013. Basics of building physics 5 (daylight), first edition. Jahad University Press, Amir Kabir Industrial Branch.( In Persian)
   
   
   1. Liliana, O. B., Lee, E.S., Papamichael, K. and Selkowitz, S., 1994. The design and evaluation     three advanced  daylighting systems: Light shelves, light pipes and skylights. Proceedings of the Solar 94’ Golden opportunities for solar prosperity, San Jose, 25-30 June.
   
   
   2. Zakhour, S,. 2015. the Influence of Selected Design Parameters on the Performance of Lightshelves under Overcast Conditions.
   
   
   3. Chae, W .Lee, H .Kim, Y., 2015. A Study on Performance Evaluation of  Mixed Light shelf Type According to the Angle of Light shelf, International Journal of Smart Home.
   
   
   4. Baker, N. Steemers Koen. , 2002. Daylight Design of Buildings. London.
   
   
   5. CIE,. 1987, International Lighting Vocabulary. ,Commission. 
   
   
   6. Ghiabaklo, z .Moazzeni, mh,. 2016. Investigating the influence of  LightShelf Geometry Parametres on Daylight Performance and Visual  Comfort, a Case Study of Educational Space in Tehran, Iran. Buildings. Available on: http://www.civilica.com/paper- AEBSCONF02_29.html.
      
      
      1. Winterbottom, M. Wilkins, A., 2009. Lighting and discomfort in the classroom, Journal of Environmental Psychology, pp. 63-75.
      
      
      2. Aghemo, C. Pellegrino, A., 2008.The approach to daylighting by scale models and sun and sky simulaators: A case study for diffrenent shading systems. BBUILDING AND Environment, Vol.43, pp. 917-927.
      
      
      3. IEA, SHC Task21, 2000. Daylight in Buildings. ECBCS Annex.
      
      
      4. Freewan.A, 2010. Maximizing the lightshelf performance by interaction between lightshelf geometries and a curved ceiling. Energy Conversion and Management, Vol. 51, pp. 1600-1604.
      
      
   
   

9.  Dolatabadi, M,. 2013. Optimization of Energy Consumption by Increasing the Use of Daylight in Classrooms of Educational Buildings, Master's Thesis for Architecture, College of Architecture, Tarbiat Modares University. (In Persian)

10.   Ahadi, A, Khan Mohammadi, M., 2015. Better performance of students using proper daylight in classrooms; Case study: Faculty of Architecture, University of Science and Technology of Iran. Architectural and Urban Design Letter, Art University, Fall & Winter, No. 94, No. 15. (In Persian)