Design, Fabrication and Evaluation of the harvesting machine Echium Amoenum
Subject Areas :
Keywords: Echium Amoenum, Echium Amoenum harvesting machine, location factors, agronomy factors, mechanized harvesting,
Abstract :
Now 100 percent of the harvest Echium Amoenum is done manually borage high cost of labor and time-consuming cultivation of this plant is the most important limiting factor. The research for the design, construction and evaluation was performed harvester Echium Amoenum . Vacuum mechanism was inspired to design and build this car, but with the difference that instead of a combustion engine, electric motor was used. The car compatibility with all existing non-farm agronomic conditions and physical and mechanical properties such as plants, cultivation, the culture, the environment and natural plant growth areas (uneven) etc. were taken into account. In order to evaluate and assess the efficiency of the machine, the machine is tested and evaluated different crop conditions. The results showed that the function of field capacity between 3.0 to 4.0 kg of flower harvest hours. It should be noted, the field capacity by plant density, operator skill, the ruggedness of the region (the ease of access to the plant) and so on. According to studies carried out to harvest a kilogram Glgavzban to one - day labor is needed. While using this machine on average about three and a half kilograms can be taken Echium Amoenum. Based on observations made on goals scored directly from the mouth of the device were picked up about 5% damage was observed in other cases no serious damage was found on the flowers.
_||_