Subject Areas : Mechanical Engineering

Himan khaledi ¹ (Department of Mechanical Engineering, Sari Branch, Islamic Azad University, Sari, Iran)

Received: 2022-08-07 Accepted : 2022-08-23 Published : 2022-06-01

Keywords:

References:

[1]   Jesthi, D.K., Mandal, P., Rout, A.K. and Nayak, R.K., 2018. Enhancement of mechanical and specific wear properties of glass/carbon fiber reinforced polymer hybrid composite. Procedia Manufacturing, 20, pp.536-541.

[2]   Zhang, J., Chaisombat, K., He, S. and Wang, C.H., 2012. Glass/carbon fibre hybrid composite laminates for structural applications in automotive vehicles. In Sustainable Automotive Technologies 2012 (pp. 69-74). Springer, Berlin, Heidelberg.

[3]   Rajpurohit, A., Joannès, S., Singery, V., Sanial, P. and Laiarinandrasana, L., 2020. Hybrid effect in in-plane loading of Carbon/glass fibre based inter-and intraply hybrid composites. Journal of Composites Science, 4(1), p.6.

[4]   Singh, S.B. and Chawla, H., 2019. Hybrid effect of functionally graded hybrid composites of glass–carbon fibers. Mechanics of Advanced Materials and Structures, 26(14), pp.1195-1208.

[5]   Naik, N.K., Ramasimha, R., Arya, H.E.M.E.N.D.R.A., Prabhu, S.V. and ShamaRao, N., 2001. Impact response and damage tolerance characteristics of glass–carbon/epoxy hybrid composite plates. Composites Part B: Engineering, 32(7), pp.565-574.

[6]   Subagia, I.A., Kim, Y., Tijing, L.D., Kim, C.S. and Shon, H.K., 2014. Effect of stacking sequence on the flexural properties of hybrid composites reinforced with carbon and basalt fibers. Composites Part B: Engineering, 58, pp.251-258.

[7]   Djama, K., Michel, L., Gabor, A. and Ferrier, E., 2019. Mechanical behaviour of a sandwich panel composed of hybrid skins and novel glass fibre reinforced polymer truss core. Composite Structures, 215, pp.35-48.

[8]   Djama, K., Michel, L., Ferrier, E. and Gabor, A., 2019. Hybrid sandwich panels for building uses: focus on glass fibre reinforced polymer and mineral matrix interface. In MATEC Web of Conferences (Vol. 289, p. 10006). EDP Sciences.

[9]   Uzay, C., Geren, N., Boztepe, M.H. and Bayramoglu, M., 2019. Bending behaviour of sandwich structures with different fiber facing types and extremely low-density foam cores. Materials Testing, 61(3), pp.220-230.

[10]           Xiong, J., Ghosh, R., Ma, L., Ebrahimi, H., Hamouda, A.M.S., Vaziri, A. and Wu, L., 2014. Bending behaviour of lightweight sandwich-walled shells with pyramidal truss cores. Composite Structures, 116, pp.793-804.

[11]           Hosur, M.V., Adbullah, M. and Jeelani, S., 2005. Studies on the low-velocity impact response of woven hybrid composites. Composite Structures, 67(3), pp.253-262.

[12]           Sarasini, F., Tirillò, J., Ferrante, L., Valente, M., Valente, T., Lampani, L., Gaudenzi, P., Cioffi, S., Iannace, S. and Sorrentino, L., 2014. Drop-weight impact behaviour of woven hybrid basalt–carbon/epoxy composites. Composites Part B: Engineering, 59, pp.204-220.

[13]           Sayahlatifi S, Rahimi GH, Bokaei A. The quasi-static behaviour of hybrid corrugated composite/balsa core sandwich structures in four-point bending: Experimental study and numerical simulation. Engineering Structures. 2020 May 1;210:110361.

[14]           Florence A, Jaswin MA, Arul Prakash MA, Jayaram RS. Effect of energy-absorbing materials on the mechanical behaviour of hybrid FRP honeycomb core sandwich composites. Materials Research Innovations. 2020 Jun 6;24(4):244-55.

[15]           Rupp P, Elsner P, Weidenmann KA. Failure mode maps for four-point-bending of hybrid sandwich structures with carbon fiber reinforced plastic face sheets and aluminum foam cores manufactured by a polyurethane spraying process. Journal of Sandwich Structures & Materials. 2019 Nov;21(8):2654-79.

[16]           Kim, D.H., Kim, H.G. and Kim, H.S., 2015. Design optimization and manufacture of hybrid glass/carbon fiber reinforced composite bumper beam for automobile vehicle. Composite Structures, 131, pp.742-752.

[17]           Bhagwat, P.M., Ramachandran, M. and Raichurkar, P., 2017. Mechanical properties of hybrid glass/carbon fiber reinforced epoxy composites. Materials Today: Proceedings, 4(8), pp.7375-7380.

[18]           Hoffman, J., Middleton, J. and Kumosa, M., 2015. Effect of a surface coating on flexural performance of thermally aged hybrid glass/carbon epoxy composite rods. Composites Science and Technology, 106, pp.141-148.

[19]           Naresh, K., Shankar, K., Rao, B.S. and Velmurugan, R., 2016. Effect of high strain rate on glass/carbon/hybrid fiber reinforced epoxy laminated composites. Composites Part B: Engineering, 100, pp.125-135.

[20]           Marston, C., Gabbitas, B. and Adams, J., 1997. The effect of fibre sizing on fibres and bundle strength in hybrid glass carbon fibre composites. Journal of materials science, 32(6), pp.1415-1423.