Subject Areas :

زهرا شکوری ¹ , هدایت اله صادقی قاری ²

1 - کارشناس ارشد مهندسی صنایع پلیمر، مربی، باشگاه پژوهشگران جوان و نخبگان، واحد امیدیه، دانشگاه آزاد اسلامی، خوزستان، ایران
2 - کارشناس ارشد مهندسی صنایع پلیمر، مربی، باشگاه پژوهشگران جوان و نخبگان، واحد امیدیه، دانشگاه آزاد اسلامی، خوزستان، ایران

Received: 2013-02-19 Accepted : 2013-04-21 Published : 2013-05-22

Keywords:

References:

[1] Aminabhavi, T.M.; Khinnavar, R.S.; J. polymer, 34, 1006-1018, 1993.
[2] Schneider, N.S.; Illinger, J.L.; Cleaves, M.A.; J. Polym. Eng. Sci., 26, 1547-1554, 1986.
[3] Myers, M.E.; Abu–Isa, I.A.; J. Appl. Polym. Sci., 32, 3515-3522, 1986.
[4] Bouvier, J.M.; Gelus, M.; J. Rubber Chem. Technol., 59, 233-240, 1986.
[5] Johnson, T.; Thomas, S.; J. polymer, 41,

7511-7522, 2000.
[6] Lawandy, S.N.; Wassef, M.T.; J. Appl. Polym. Sci., 40, 323-329, 1990.
[7] Unnikrishnan, G.; Thomas, S.; J. Polym. Sci. B: Polym. Phys., 35, 725–734, 1997.
[8] Unnikrishnan, G.; Thomas, S.; J. Polymer, 35, 5504, 1994.
[9] Morrison, N.J.; Porter, M.; J. Rubber Chem. Technol., 57, 63-68, 1994.
[10] Kundu, P.P.; Choudhury, R.N.P.; Tripathy, D.K.; J. Appl. Polym. Sci., 71, 551-558, 1999.
[11] Sujith, A. Unnikrishnan, G.; J. Polym. Research, 13, 171–180, 2006.
[12] Aminabhavi, T.M.; Phayde, H.T.S.; Ortego, J.D.; Elliff, C.; Rao, A.; J. Polym. Eng., 16, 121, 1996.
[13] Varghese, H.; Bhagwan, S.S; Thomas, S.; J. Polym. Sci., Part B: Polym. Phys, 37, 1815–1831,1999.
[14] Asaletha, R.; Kumaran, M.G.; Thomas, S.; J. Polym. Polym. Compos., 6, 357-364, 1998.
[15] George, S.; Varughese, K.T.; Thomas, S., J. Polymer, 41, 579-584, 2000.
[16] Akporhonor, E.E.; Egwaikhide, P.A.; Okieimen, F.E.; J. Sci. Res. Essay, 2(5), 159-162, 2007.
[17] Choudalakis, S.; Gotsis, A.D.; J. Polym., 45, 967-984, 2009.
[18] Manchado, M.L.; J. Polym. Int., 52, 1070–1077, 2003.
[19] Flory, P.J.; "in Principles of Polymer Chemistry", Cornell University, Ithaca, New York, 1953.
[20] Sperling, L.H.; "Introduction to Physical Polymer Science", 4th ed., Wiley, New York, 472–473, 2006.
[21] Ismail, H.; Edyham, M.R; Wirjosentono, B.; J. Iran. Polym., 10, 377-383, 2001.
[22] Shah, J.; Yuan, Q.; Misra, R.D.K.; J. Materials Science and Engineering A, 523, 199–206, 2009.
[23] Pojanavaraphan, T.; Schiraldi, D.A.; Magaraphan, R.; J. App. Clay Sci., (Article in press).
[24] George, S.C.; Thomas, S.; J. Polym. Sci., 26, 985, 2001.
[25] Igwe, I.O.; ezeani, O.E.; J. Polym. Sci., Article ID: 212507, 1-11, 2012.
[26] Aprem, A.S.; Joseph, K.; Mathew, A.P.; Thomas, S.; J. Applied polymer Science, 78, 941-952, 2000.
[27] Hansen, C.M.; Hansen solubility parameters, a user’s data handbook, CRC, Boca Raton, 2000.
[28] Nohile, C.; Dolez, P.I.; Khanh, T.V.; J. Applied polymer Science, 110: 3926–3933, 2008.
[29] Hwang, W.G.; Wei, K.H.; Wu, C.M.; J. Polym. Eng. Sci., 46, 80–88, 2006.
[30] Mousa, A.; Kocsis, J.K.; J. Macromol. Mater. Eng., 286, 260-269 ,2001.
[31] Mathew, T.V.; Kuriakose, S.; J. Polym. Compos., 28, 15–22, 2007.
[32] Mathai, A.E.; Singh, R.P.; Thomas, S.; J. Membrane Sci., 202, 35–54, 2002.
[33] Igwe, I.O.; Ewulonu, C.M.; Igboanugo, I.; J. Applied Polymer Science, 102(2), 1985–1989, 2006.
[34] Igwe, I.O.; J. Applied Polymer Science, 104(6), 3849– 3854, 2007.
[35] Jacob, A.; Kurian, P.; Aprem, A.S.; J. Appl Polym Sci, 108, 2623–2629, 2008.
[36] Kader, M.A.; Bhowmick, A.K.; J. Polym. Eng. Sci., 43, 975-986, 2003.
[37] Sadeghi-Ghari, H.; Shakouri, Z.; J. Polymer Science and Technology, 24(3), 215-230, 2011.
[38] Siddaramaiah, S.; Roopa,; Premakumar, U.; J. Polym. 39 (17) 3925-3931, 1998.
[39] Malomo, D.; Akinlabi, A.K.; Okieimen, F.E.; Egharevba, F.; J. Chemical Industry & Chemical Engineering Quarterly, 16(1), 19−30, 2010.
[40] Li, Q.; Kim, N.H.; Yoo, G.H.; Lee, J.H; J. Composites: Part B, 40, 218–224, 2009.
[41] Pojanavaraphan, T.; Magaraphan, R.; J. Polym., 44, 1968–1977, 2008.