Design and Simulation of a Wilkinson Power Divider with High Isolation for Tri-Band Operation Using PSO Algorithm

Subject Areas : Renewable energy

Farzad  Khajeh-khalili ¹ (Najafabad Branch, Islamic Azad University)
Mohammad Amin  Honarvar ² (Najafabad Branch, Islamic Azad University)

Received: 2015-04-27 Accepted : 2015-07-12 Published : 2015-11-01

Keywords: PSO, isolation, Wilkinson power divider, Tri-band, quarter-wavelength transmission line, equivalent three section transmission line,

Abstract :

In this article, a microstrip tri-band Wilkinson power divider, using the equivalent three section transmission line instead of common quarter-wavelength transmission line with help of PSO algorithm, design and simulated. Optimized choices for electrical lengths of equivalent three section transmission line, characteristic impedances of lines and finally design of three resistors for high isolation between output ports will be obtained. The results of the researches in this article show that the proposed Wilkinson power divider, besides high isolation between output ports, will be a tri-band Wilkinson power divider to be used in communication wireless systems such as GSM 850 , GSM 900 , GPS, GSM1800 ، GSM 1900, UMTS, WLAN and WiMAX. Next, the designed Wilkinson power divider is going to be simulated by CST-MW 2013 software. The result of simulation show that the proposed structure, analysis and design method are suitable.

References:

[1] D.M. Pozar, "Microwave Engineering", 3rd ed., pp. 333-337, New York: Wiley, 2005. 

[2] E.J. Wilkinson, "An N-way hybrid power divider", IEEE Trans. on Microwave Theory and Techniques, Vol. 8, No. 1, pp. 116-118, Jan. 1960.

[3] L. Wu, H. Yilimaz, A. Pascht, M. Berroth, "A dual-frequency Wilkinson power divider: For a frequency and its first harmonic", IEEE Microwave and Wireless Components Letters, Vol. 15, No. 2, pp. 107-109, Feb. 2005.

[4] L. Wu, H. Yilimaz, M. Berroth, "A dual-frequency Wilkinson power divider", IEEE Trans. on Microwave Theory and Techniques, Vol. 54, No. 1, pp. 278-284, Jan. 2006.

[5] A.S.S. Mohra, "Compact dual band Wilkinson power divider", Microwave and Optical Technology Letters, Vol. 50, No. 6, pp. 1678-1681, Jun. 2008.

[6] Y. Wu, Y. Liu, Sh. Li, H. Zhou, "Compact dual-band equal power divider circuit for large frequency-ratio application", Journal of Infrared, Millimeter, and Terahertz WavesVol. 31, No. 2, pp. 228-236, Sep. 2009.

[7] X. Wang, I. Sakagami, A. Mase, M. Ichimura, "Wilkinson power divider with complex isolation component and its miniaturization", IEEE Trans. on Microwave Theory and Techniques, Vol. 62, No. 3, pp. 422-430, Mar. 2014.

[8] M. Chongcheawchamnan, S. Patisang, M. Krairiksh, I.D. Robertson, "Tri-band Wilkinson power divider using a three-section transmission-line transformer", Microwave and Wireless Components Letters, Vol. 16, No. 8, pp. 452-454, Aug. 2006.

[9] B. Xia, L. Sh. Wu, J. Mao, L. Yang, "A new quad-band Wilkinson power divider", Journal of Electromagnetic Waves and Applications, Vol. 28, No. 13, pp. 1622-1634, Aug. 2014.

[10] L. Chang, H. Tseng, "Compact Wilkinson power divider using two-section asymmetrical T-structures", Electronics Letters, Vol. 49, No. 8, pp. 516-5172, Apr. 2013.

[11] H. Tseng, H. Wu, "Compact planar Wilkinson power divider using π-equivalent shunt-stub-based artificial transmission lines",  Electronics Letters, Vol. 46, No. 19, pp. 1327-1328, Sep. 2010.

[12] W. Choe, J. Jeong, "Compact modified Wilkinson power divider with physical output port isolation", IEEE Microwave and Wireless Components Letters, Vol. 24, No. 2, pp. 81-83, Feb. 2014.

[13] N. Gao, G. Wu, Q. Tang, "Design of a novel compact dual-band Wilkinson power divider with wide frequency ratio", IEEE Microwave and Wireless Components Letters, Vol. 10, No. 4, pp. 236-239, Oct. 2013.

[14] J. Wang, J. Ni, Y.X. Guo, D. Fang, "Miniaturized Microstrip Wilkinson power divider with harmonic suppression", IEEE Microwave and Wireless Components Letters, Vol. 19, No. 7, pp. 440-442, July 2009.

[15] R. Mirzavand, M.M. Honari, A. Abdipour, G.R. Moradi, "Compact Microstrip Wilkinson power dividers with harmonic suppression and arbitrary power division ratios", IEEE Trans. on Microwave Theory and Techniques,  Vol. 61, No. 1, pp. 61-68, Jan. 2013.

[16]J. Kennedy, R. Eberhart, "Particle swarm optimization", Proceeding of the IEEE/ICNN, pp. 1942-1948, Perth, WA, Nov./Dec.1995.

[17] W. Wang, Y. Lu, J.S. Fu, Y. Zh. Xiang, "Particle swarm optimization and finite-element based approach for microwave filter design", IEEE Trans. on Microwave Theory and Techniques, Vol. 41, No. 5, pp. 1800-1803, May 2005.

[18] O.T. Altinoz, A.E. Yilmaz, "Particle swarm optimization with parameter dependency walls and its sample application to the Microstrip-like interconnect line design",International Journal of Electronics and Communications, Vol. 66, No. 10, pp. 107-114, May 2011.

[19] Y. Shi, R. Eberhart, "A modified particle swarm optimizer", Proceeding of the IEEE/ICEC, pp. 69-73, Anchorage, AK, May1998.

[20] R. Eberhart, Y. Shi, "Particle swarm optimization: developments, applications and resources", Proceeding of the IEEE/CEC, Vol. 1, pp. 81-86, Seoul, May 2001.

[21] Y. Shi and R. Eberhart, "Comparing inertia weights and constriction factors in particle swarm optimization", Proceeding of the IEEE/CEC, Vol. 1, pp. 84-88, La Jolla, CA, July 2000.