تخمین استحکام فشاری ماسه ریخته‌گری در مقادیر مختلف رطوبت با استفاده از شبکه عصبی مصنوعی

Subject Areas :

رامین مشک آبادی ¹ , غلامرضا مرامی ² , کمال جهانی ³

1 - مربی گروه مکانیک، دانشگاه آزاد اسلامی واحد اهر
2 - کارشناس ارشد مهندسی مکاترونیک، دانشگاه تبریز
3 - استادیار، دانشکده مهندسی مکانیک، دانشگاه تبریز

Received: 2014-01-09 Accepted : 2014-01-09 Published : 1389-11-01

Keywords:

References:

1- Srinagesh K., Seshadri M., Ramchandran A.,  On the compaction of bonded grains, AFS Trans.74, pp. 27- 36, 1966.

2- Dietert H.W., Brewster F.S., Graham A.L.,A straight line approach to sand control, AFS Trans. 74 , pp. 101- 111,1966.

3- Zrimsek A.H., Heine R.W., Clay, fines, and water relationships for green strength in molding sands, Transactions of AFS. 63, pp. 575–581,1955.

4- Brewster F.S., Practical moulding sand control, Foundry 82, 11, pp. 102–107.

5- Chang Y., Hocheng H., The flow ability of moldings sand, Journal of Materials Processing Technology, 113, pp. 238- 244,2001.

6- Kundu R.R., Lahiri B.N.,2008, Study and statistical modeling of Green Sand Mould properties using RSM, International Journal of Materials and Product Technology, 31, pp. 143-158.

7- Benny Karunakar, D.,  Datta, G.L., Controlling green sand mould properties using artificial neural networks and genetic algorithms - A comparison, Applied Clay Science, 37, pp. 58-66,2007.

8- Nagurbabu N., Ohdar R.K., Push P.T.,Application of Intelligent Techniques for Controlling the Green Sand Properties, proceeding of 55^th Indian Foundry Congress, 2007.

9- Parappagoudar M. B., Pratihar D.K., Datta G.L., Forward and reverse mappings in green sand mould system using neural networks, Applied Soft Computing 8, pp. 239–260, 2008.

10- D.B.Karunakar, G.L. Datta, "Modeling and optimization of green sand mould parameters using genetic algorithms", Transactions of Institute of Indian foundry men, Vol.51, pp. 262–267, 2003a.

11- Karunakar D.B., Datta G.L., Modeling of green sand mould parameters using artificial neural networks, Indian Foundry Journal, 49, pp. 27–36,2003.

12- Liu W., Structural dynamic analysis and testing of coupled structures, Ph.D. Dissertation, Mechanical Engineering Dept., University of London, London SW7, 2000.

13- Jahani K., Nobari A.S., Identification of Damping and Dynamic Young’s Modulus of a Structural Adhesive Using Radial Basis Function Neural Networks and Modal Data ,Experimental Mechanics , 50,  pp. 607-619,2009.

14- Attalla M.J., Inman D.J., On Model Updating Using Neural Networks, Journal of Mechanical Systems and Signal Processing, 12, pp. 135-161,1998.

15- Mold and Core Test Handbook, 3^rd Edition, American Foundry men's Society (AFS), 1980.

16- Foundry Sand Handbook, 7^th Edition, American Foundry men's Society (AFS), 1963.

17- فتحی ، م. ح. ، مواد قالبگیری برای ریخته‌گری فلزات ، نشر ارکان ، تهران، 1386.