Comparison of the Behavior of Martensitic and Ferrite Samples on Acoustic Emission Parameters

Subject Areas :

Ramin Khamedi ¹ , Mehdi Khosravi ²

1 - Department of Mechanical Engineering, Khazar University, Baku, Azerbaijan|Department of Mechanical Engineering, Zanjan University, Zanjan, Iran
2 - Department of Mechanical Engineering, Zanjan University, Zanjan, Iran

Received: 2022-11-15 Accepted : 2022-12-29 Published : 2022-12-29

Keywords:

References:

[1] Afsari, A., Fazel, D., Karimisharifabadi, J. and Mehrabi, V. 2020. Study the Percentage of Carbon and Ferrite in Layers of Steel (SA-516) by Strip Cladding with E316L. Journal of Modern Processes in Manufacturing and Production. 9(3): 41-50.

[2] Salari, M. 2019. Texture Evolution in Low Carbon Steel Fabricated by Multi-directional Forging of the Martensite Starting Structure. Journal of Modern Processes in Manufacturing and Production. 8(4): 5-15.

[3] Verhoeven, J. D. 2005. Metallurgy of steel for bladesmiths & others who heat treat and forge steel. Iowa State University. Ph.D. Thesis.

[4] Maki, T. 2012. Morphology and substructure of martensite in steels. Phase Transformations in Steels. Elesevier.

[5] Vahaviolos, S. J. 1999. Acoustic Emission: Standards and Technology Update (Vol. 1353). ASTM International.

[6] Khamedi, R., Fallahi, A. and Oskouei, A. R. 2010. Effect of martensite phase volume fraction on acoustic emission signals using wavelet packet analysis during tensile loading of dual phase steels. Materials & Design. 31(6): 2752-2759. 

[7] Fallahi, A., Khamedi, R., Minak, G. and Zucchelli, A. 2012. Monitoring of the deformation and fracture process of dual phase steels employing acoustic emission techniques. Materials Science and Engineering. 548: 183-188.

[8] Van Bohemen, S. M. C., Sietsma, J., Hermans, M. J. M. and Richardson, I. M. 2003. Kinetics of the martensitic transformation in low-alloy steel studied by means of acoustic emission. Acta Materialia. 51(14): 4183-4196.

[9] Khamedi, R., Fallahi, A. and Zoghi, H. 2009. The influence of morphology and volume fraction of martensite on AE signals during tensile loading of dual-phase steels. International Journal of Recent Trends in Engineering. 1(5): 30-34.

[10] Khamedi, R., Fallahi, A., Refahi Oskouei, A. and Ahmadi, M. 2008. The effect of martensite phase volume fraction of dual-phase steels on acoustic emission signals under tensile loading. In 17^th National Symposium on Ultrasonics Conference, Varanasi, India.

[11] Speich, G. R. and Schwoeble, A. J. 1975. Acoustic emission during phase. ASTM International. 571: 40-50.

[12] Rad, V. F., Khamedi, R. and Moradi, A. R. 2019. The effect of martensite volume fraction on topography of dual phase steels. Materials Letters. 239: 21-23.

[13] Kamel, S. M., Samy, N. M., Tóth, L. Z., Daróczi, L. and Beke, D. L. 2022. Denouement of the Energy-Amplitude and Size-Amplitude Enigma for Acoustic-Emission Investigations of Materials. Materials. 15(13): 4556.

[14] Ramalho, A., Santos, T. G., Bevans, B., Smoqi, Z., Rao, P. and Oliveira, J. P. 2022. Effect of contaminations on the acoustic emissions during wire and arc additive manufacturing of 316L stainless steel. Additive Manufacturing. 51: 102585.

[15] Speich, G. R. and Fisher, R. M. 1972. Acoustic emission during martensite formation. ASTM STP. 505: 140-151.

[16] Planes, A., Mañosa, L. and Vives, E. 2013. Acoustic emission in martensitic transformations. Journal of Alloys and Compounds. 577: 699-704.

[17] Khosravi, M. and Khamedi, R. 2022. Investigation of the effect of ferrite grain size on acoustic emission signals. Journal of Modern Processes in Manufacturing and Production. 11(3): 61-68.

[18] Bayram, A., Uǧuz, A. and Ula, M. 1999. Effects of microstructure and notches on the mechanical properties of dual-phase steels. Materials characterization. 43(4): 259-269.

[19] Dieter, P. P. 1988. Mechanical Metallurgy. McGraw-Hill Book. New York 1986.

[20] JH, H. and DM, L. 1999. Acoustic emission behavior during tensile tests of low carbon steel welds. ISIJ International. 39(4): 365-370.

[21] Huh, J. H., Lee, K. A. and Lee, C. S. 1997. Acoustic emission behavior during tensile deformation of welded steel joints. International Nuclear Information System. 45(29): 80-88.

[22] Raj, B., Jha, B. B. and Rodriguez, P. 1989. Frequency spectrum analysis of acoustic emission signal obtained during tensile deformation and fracture of an AISI 316 type stainless steel. Acta metallurgical. 37(8): 2211-2215.

[23] Casey, N. F., White, H. and Taylor, J. L. 1985. Frequency analysis of the signals generated by the failure of constituent wires of wire rope. NDT international. 18(6): 339-344.