The Recommend of Filler Metal to Increasing the Corrosion Resistance of Gas Pipeline

Subject Areas :

Esmaeil  Jafari ¹ (Materials Science and Engineering Dept., Islamic Azad University, Shiraz Branch)
Mohammad  Sadegh Karimi ² (Member of South Zagros Oil and Gas Company)

Received: 2020-05-03 Accepted : 2020-08-15 Published : 2020-08-01

Keywords:

References:

[1] Yesen, Z., Yunze, X., Mingyu, W., Xiaona, W., Gang, L. and Yi, H. 2019. Understanding the influences of temperature and microstructure on localized corrosion of subsea pipeline weldment using an integrated multi-electrode array. Ocean Engineering. 189:1-14.

[2] Sabet, A. R. and Montazerolghaem, H. 2018. Manufacturing of Aluminum Thin Cylindrical Parts By Using Friction Stir Welding Method, Journal of Modern Processes in Manufacturing and Production. 7:21-28

[3] Moradi, M., Ghoreishi, M. and Rahmani, A. 2016. Numerical and Experimental Study of Geometrical Dimensions on Laser-TIG Hybrid Welding of Stainless Steel 1.4418. Journal of Modern Processes in Manufacturing and Production. 5: 21-31

[4]  Granjon, H. Fundamentals of Welding Metallurgy. 1991. Abington Publishing. 156-177.

[5] Aneesh, K. and Prashant, D. 2020. Investigating the effects of filler material and heat treatment on hardness and impact strength of TIG weld. Materials Today: Proceedings. 33: 1-7.

[6] Deen, K. M., Ahmad, R., Khan, I. H. and Farahat, Z. 2010. Microstructural study and electrochemical behavior of low alloy steel weldment. Materials and Design. 31 (1), 3051–3055.

[7] Waqar, H., Masood, U. and Tariqc, M. 2020. Assessment of fatigue and electrochemical corrosion characteristics of dissimilar materials weld between alloy 617 and 12 Cr steel. Journal of Manufacturing Processes. 53:275-282.

[8] Hongyang, J., Yongdian, H., Zhicao, F. and Lianyong, X. 2016. Recommend design of filler metal to minimize carbon steel weldmetal preferential corrosion in CO2-saturated oilfield produced water. Applied Surface Science. 389: 609-622

[9] Abioyea, T.E., Ariwoolac, O.E., Ogedengbec, T.I., Farayibib, P.K. and Gbadeyanc, O.O. 2019. Effects of Welding Speed on the Microstructure and Corrosion Behavior of Dissimilar Gas Metal Arc Weld Joints of AISI 304 Stainless Steel and Low Carbon Steel. Materials Today, Proceedings, 17(3): 871–877.

[10] Anbarasu, P., Yokeswaran, R., Godwin, A. and Sivachandran, S. 2020. Investigation of filler material influence on hardness of TIG welded joints. Materials Today: Proceedings. 33: 1-4.

[11] Zhanga, Y., Hongyang, J., Lianyong, X., Yongdian, H. and Lei, Z. 2018. Design and performance of weld filler metal to match an advanced heat resistant Fe-Cr-Ni alloy. Materials Science & Engineering A. 721:103-116.

[12] Liqing, H., Guobiao, L., Zidong, W., Hong, Z., Feng, Li. and Long, You. 2010. Study on Corrosion Resistance of 316L Stainless Steel Welded Joint. Rare Metal Materials and Engineering. 3: 393–396.

[13] Tan, H., Wang, Z., Jiang,Y., Yang,Y., Deng, Bo. and Song, H. 2012. Influence of welding thermal cycles on microstructure and pitting corrosion resistance of 2304 duplex stainless steels. Corrosion Science. 55:368–377.

[14] Yang, Y., Yan, B., Li, J. and Wang, J. 2011. The effect of large heat input on the microstructure and corrosion behavior of simulated heat affected zone in 2205 duplex Stainless Steel. Corrosion Science. 53:3756-3763.

[15] Rudra, P., Pratap , S. and Subodh, K. 2020. Effect of current and chemical composition on the hardness of weld in shielded metal arc welding. Materials Today: Proceedings. 26-2:1888-1891.

[16] Fuyun, L., Caiwang, T., Xiangtao, G., Laijun, W. and Jicai, F. 2020. A comparative study on microstructure and mechanical properties of HG785D steel joint produced by hybrid laser-MAG welding and laser welding. Optics & Laser Technology.128:106247.