Fabricating the Tribological Properties and Investigating of Ni3Al-MoS2 Composite Coating

Subject Areas : Surface Engineering

Mahdi Mirzaaghaei ¹ , Mohammad-Hossein Enayati ² , Mahdi Ahmadi ³

1 - Student, department of Materials Engineering, Naghshe Jahan University, Isfahan, Iran
2 - Department of Materials Engineering, Isfahan University of Technology, Isfahan, 84154, Iran
3 - Department of Materials Engineering, Naghshe Jahan University, Isfahan, 77142, Iran

Received: 2020-04-25 Accepted : 2020-07-30 Published : 2021-01-01

Keywords:

References:

[1] S. Sun, J. Chen, Y. Wang, L. Wang, and Z. Sun, "Structural sensitivity of MoS₂-based films in solid space lubrication," Surface Engineering, vol. 36, pp. 106-113, 2020/01/02 2020.

[2] Freschi, M., Di Virgilio, M., Zanardi, G., Mariani, M., Lecis, N., and Dotelli, G., 2021, “Employment of Micro- and Nano-WS2 Structures to Enhance the Tribological Properties of Copper Matrix Composites,” Lubricants, 9(5).

[3] H. Torres, H. Rojacz, L. Čoga, M. Kalin, and M. Rodríguez Ripoll, "Local mechanical and frictional properties of Ag/MoS₂-doped self-lubricating Ni-based laser claddings and resulting high temperature vacuum performance," Materials & Design, vol. 186, p. 108296, 2020/01/15/ 2020.

[4] M. S. Libório, G. B. Praxedes, L. L. F. Lima, I. G. Nascimento, R. R. M. Sousa, M. Naeem, et al., "Surface modification of M2 steel by combination of cathodic cage plasma deposition and magnetron sputtered MoS₂-TiN multilayer coatings," Surface and Coatings Technology, vol. 384, p. 125327, 2020/02/25/ 2020.

[5] H. Du, C. Sun, W. Hua, T. Wang, J. Gong, X. Jiang, et al., Structure, mechanical and sliding wear properties of WC–Co/MoS₂–Ni coatings by detonation gun spray, J. Mater. Sci. Eng: A. 445–446 (2007) 122-134.

[6] Rajesh Kumar, L., Saravanakumar, A., Bhuvaneswari, V., Jithin Karunan, M. P., Karthick Raja, N., and Karthi, P., 2020, “Tribological Behaviour of AA2219/MoS2 Metal Matrix Composites under Lubrication,” AIP Conf. Proc., 2207(February).

[7] Devaganesh, S., Kumar, P. K. D., Venkatesh, N., and Balaji, R., 2020, “Study on the Mechanical and Tribological Performances of Hybrid SiC-Al7075 Metal Matrix Composites,” J. Mater. Res. Technol., 9(3), pp. 3759–3766.

[8] Liu, C., Chen, Y., Qiu, L., Liu, H., Bai, M., and Xiao, P., 2020, “The Al-Enriched γ’-Ni3Al-Base Bond Coat for Thermal Barrier Coating Applications,” Corros. Sci., 167(2517), p. 108523.

[9] Yang, Z. W., Lian, J., Wang, J., Cai, X. Q., Wang, Y., Wang, D. P., Wang, Z. M., and Liu, Y. C., 2020, “Diffusion Bonding of Ni3Al-Based Alloy Using a Ni Interlayer,” J. Alloys Compd., 819, p. 153324.

[10] K. P. Furlan, J. D. B. de Mello, and A. N. Klein, "Self-lubricating composites containing MoS₂: A review," Tribology International, vol. 120, pp. 280-298, 2018/04/01/ 2018.

[11] S. Zhu, J. Cheng, Z. Qiao, and J. Yang, "High temperature solid-lubricating materials: A review," Tribology International, vol. 133, pp. 206-223, 2019/05/01/ 2019.

[12] Yuan, J., Ph, D., Wang, Q., Liu, X., Lou, S., Li, Q., and Wang, Z., 2020, “Microstructures and High-Temperature Wear Behavior of NiAl / WC-Fe x Coatings on Carbon Steel by Plasma Cladding,” J. Alloys Compd., 842, p. 155850.

[13] Shi, X., Song, S., Zhai, W., Wang, M., Xu, Z., Yao, J., Qamar ud Din, A., and Zhang, Q., 2014, “Tribological Behavior of Ni3Al Matrix Self-Lubricating Composites Containing WS2, Ag and HBN Tested from Room Temperature to 800°C,” Mater. Des., 55, pp. 75–84.

[14] Yao, Q., Jia, J., Chen, T., Xin, H., Shi, Y., He, N., Feng, X., Shi, P., and Lu, C., 2020, “High Temperature Tribological Behaviors and Wear Mechanisms of NiAl-MoO3/CuO Composite Coatings,” Surf. Coatings Technol., 395(March), p. 125910.

[15] Dong, C., Cui, Q., Gao, X., Jiang, D., Fu, Y., Wang, D., Weng, L., Hu, M., and Sun, J., 2020, “Tribological Property of MoS2-Cr3O4 Nanocomposite Films Prepared by PVD and Liquid Phase Synthesis,” Surf. Coatings Technol., 403(July), p. 126382.

[16] Mirzaaghaei, M., Enayati, M. H., and Ahmadi, M., 2016, “The Tribological Properties of Cu-Ni 3 Al-MoS2 Composite Coating Deposited by Magnetron Sputtering,” 4(4), pp. 37–45.

[17] A. Erdemir, in: B. Bhushan (Eds.), Modern Tribology Handbook, vol. II, CRC Press, Boca Raton, FL, 2001, p. 736.

[18] E. Arslan, F. Bülbül, A. Alsaran, A. Celik, and I. Efeoglu, The effect of deposition parameters and Ti content on structural and wear properties of MoS2Ti coatings, Wear 259 (2005) 814-819.

[19] F. Bülbül, İ. Efeoğlu, E. Arslan, The effect of bias voltage and working pressure on S/Mo ratio at MoS₂–Ti composite films, Appl. Surf. Sci. 253 (2007) 4415-4419.

[20] N. M. Renevier, V. C. Fox, D. G. Teer, J. Hampshire, Coating characteristics and tribological properties of sputter-deposited MoS2/metal composite coatings deposited by closed field unbalanced magnetron sputter ion plating, Surf. Coat. Technol. 127 (2000) 24-37.

[21] W. Heinke, A. Leyland, A. Matthews, G. Berg, C. Friedrich, E. Broszeit, Evaluation of PVD nitride coatings, using impact, scratch and Rockwell-C adhesion tests, Thin Solid Films 270 (1995) 431-438.

[22] S. Tokumaru and M. Hashimoto, "High resistivity AlOx thin films deposited by a novel two-step sputtering process," Surface and Coatings Technology, vol. 54-55, pp. 303-307, 1992/11/16/ 1992.

[23] Verein Deutscher Ingenieure Normen, VDI 3198, VDI-Verlag, Dusseldorf, 1991.

[24] Vidakis N., Antoniadis A., and Bilalis N., The VDI 3198 in dentationtest evaluation of areliable qualitative control for layered compounds. J . Mater. Proc. Technol., pp. 143-144, 2003.

[25] Heinke W., Leyland A., Matthews A., Berg G., Friedrich C., and Broszeit E., Evaluation of PVD nitrid ecoatings, using impact, scratch and Rockwell-C adhesion tests. Thin Solid Films., pp. 431-270, 1995.

[26] Brainard, W.A. (1969) The thermal stability and friction of the disulfides, diselenides and ditellurides of molybdenum and tungsten in vacuum (10^-9 to 10^-6 torr). NASA TN D-5141.

[27] H. E. Sliney, Solid lubricant materials for high temperatures—a review, Tribol. Int. 15 (1982) 303-315.

[28] S. V. Prasad, J. S. Zabinski, Tribology of tungsten disulphide (WS₂): characterization of wear-induced transfer films, J. Mater. Sci. Lett. 12 (1993) 1413-1415.

[29] T. W. Scharf, S. V. Prasad, Solid lubricants: a review, J. Mater. Sci. 48 (2010) 511-513.