Effect of bath pH on microstructure and corrosion behavior of manganese phosphate coating on SCM420H steel

Subject Areas : Corrosion and protection of materials

Hadi Ebrahimifar ¹ , Farhad Mohsenifar ²

1 - Department of Materials Engineering, Faculty of Sciences and Modern Technologies, Graduate University of Advanced Technology, Kerman, Iran
2 - Department of mechanical engineering, Higher Education Complex of Bam, P. O. Box: 76615-314, Bam, Kerman, Iran.

Received: 2019-03-02 Accepted : 2019-04-11 Published : 2019-05-01

Keywords:

References:

[1] C. Fang, J. Shi, L. Zhu, Research and Development of High Grade Gear Steel SCM420H for Automobile. Adv. Mater. Research. Vol. 859, 2014, pp. 11-14.                          

[2] M. T. Devlin, T. L. Turner, K. Thompson, K. Kolakowski, K. Garelick, J. M. Guevremont, T. Jao, Effect of Phosphate Coatings on Fatigue and Wear, Presented at the NLGI 74th Annual Meeting, Scottsdale, Arizona, (2007).

[3] J.R. Davis, Surface Engineering for Corrosion and Wear Resistance, ASM International, USA. 2001, pp. 95-124.

[4] M.A. Kuehner, Phosphate Conversion Coating.Metal Finishing. Vol. 83, 1985, pp. 8-15.             

[5] Ch-M. Wang, H-Ch. Liau, W-Ta. Tsai, Effects of temperature and applied potential on the microstructure and electrochemical behavior of manganese phosphate coating. Surf. Coat. Technol., Vol. 201, 2006, pp. 2994-3001.

[6] B-l. Lin, J-t. Lu, G. Kong, Synergistic corrosion protection for galvanized steel by phosphating and sodium silicate post-sealing. Surf. Coat. Technol., Vol. 202, 2008, pp. 1831-1838.

[7] J.F.Andrew, S.G. Clarke, E.E. Longhurst, The Protective Properties of Various Phosphate Coatings on Steel. J. Chem. Technol. Biot.Vol. 4, 1954, pp.581-595.

[8] D.Weng, P.Jokiel, A. Uebleis, H. Boehni, Corrosion and protection characteristics of zinc and manganese phosphate coatings. Surf. Coat. Technol., Vol. 88, 1997, pp.147-156.

[9]  F.Pastorek, K.Borko, S.Fintová, D. Kajánek, B.Hadzima, Effect of Surface Pretreatment on Quality and Electrochemical Corrosion Properties of Manganese Phosphate on S355J2 HSLA Steel.Coatings. Vol. 6, 2016, pp. 46-54. 

[10] E. Klusmann, J.W. Schultze, pH-Microscopy: technical application in phosphating solutions. Electrochim. Acta.,Vol. 48, 2003, pp. 3325-3332.                                           

[11] X.Zhang, G-y. Xiao, C-c.Jiang, Bing.Liu, N-b.Li, R-f. Zhu, Y-p.Lu, Influence of process parameters on microstructure and corrosion properties of hopeite coating on stainless steel. Corros. Sci.,Vol. 94, 2015, pp. 428-437.

[12] F. Li, G.Wang,A Black Phosphate Conversion Coating on Steel Surface Using Antimony(III)-Tartrate as an Additive. J. Mater. Eng. Perform. Vol. 25, 2016, pp.1864-1869.

[13] X. Ding, L. Xue, X-Ch. Wang, K-H. Ding, S-L. Cui, Y-C. Sun, M-S. Li,Influence of bath PH value on microstructure and corrosion resistance of phosphate chemical conversion coating on sintered Nd–Fe–B permanent magnets. J. Magnet. Magnetic. Mater.Vol. 416, 2016, pp.247-255.

[14] K. Abdalla, A. Rahmat, A. Azizan, The Effect of pH on Zinc Phosphate Coating Morphology and its Corrosion Resistance on Mild Steel. Adv. Mater. Research. Vol. 626, 2013, pp. 569-574.

[15] L.J.Boucher,L.Gmelin, K. Koeber, D. Tille, Gmelin handbook of inorganic chemistry, in: Mn-Manganese, D4toD8:Coordination Compounds, 8^th ed", Springer,  Heidelberg, Germany. 1988.

[16] F. Mangolini, L. Magagnin, P. L. Cavalloti, Pulse plating of Mn–Cu alloys on steel. J. Electrochem. Soc.,Vol. 153, 2006, pp.623-628.

[17] S. R. Taylor, Encyclopedia of Materials: Science and Technology, Coatings for Corrosion Protection: Inorganic,Elsevier,  Virginia, Usa. 2001, 1263-1269.

[18]T.S. N. Sankara Narayanan, Surface pretreatment by phosphate conversion coatings. Rev. Adv. Mater. Sci., Vol. 9, 2005, pp. 130–177.

[19] L. Fang, L.Xie,Study  on  the  growth  and  corrosion  resistance  of  manganese  phosphate  coatings  on  30CrMnMoTi  alloy  steel. Physics Procedia. Vol. 18, 2011, pp. 227–233.

[20] F. Fang, J. Jiang, Characteristics  of  a  fast  low-temperature  zinc  phosphating  coating  accelerated  by  an  ECO-friendly  hydroxylamine  sulfate. Surf. Coat. Technol., Vol. 204, 2010, pp.2381–2385.

[21] Y.Su,Y.Guo,Z.Huang,Z.Zhang,G. Li, J. Lian, L.Ren,Preparation and corrosion behaviors of calcium phosphate conversion coating on magnesium alloy. Surf. Coat. Technol., Vol. 307, 2016, pp. 99-108.

[22] H.Y. Su, C-S. Lin, Effect of additives on the properties of phosphate conversion coating on electrogalvanized steel sheet, Corros. Sci.,Vol. 83, 2014, pp. 137-146.

[23] B-L. Lin, J-T. Lu, G. Kong, Effect of molybdate post-sealing on the corrosion resistance of zinc phosphate coatings on hot-dip galvanized steel. Corros. Sci.,Vol. 50, 2008, pp. 962-967.

[24] L. A. Oliveira, O. V. Correa,A. A. Z. Páez, M. C. L. Oliveira, R. A. Antunes, Effect of silicate-based films on the corrosion behavior of the API 5L X80 pipeline steel. Corros. Sci.,Vol. 139, 2018, pp. 21-34.

[25] D. Huang, J. Hu, G-L. Song, X. Guo, Inhibition effect of inorganic and organic inhibitors on the corrosion of Mg–10Gd–3Y–0.5Zr alloy in an ethylene glycol solution at ambient and elevated temperatures. Electrochim. Acta.,Vol. 56, 2011, pp. 10166‐10178. 

[26] I.D.Raistrick, D.R. Franceschetti, J.R.Macdonald, Impedance Spectroscopy Theory, Experiment, and Application. John Wiley & Sons, New Jersey. 2005.

[27] M.A. Amin, K.F.Khaled, Q. Mohsen, H.A. Arida, A study of the inhibition of iron corrosion in HCl solutions by some amino acids. Corros. Sci.,Vol. 52, 2010, pp. 1684–1695.

[28] J. Bajat, V. B. MiškovicStankovic, N. Bibic, D. M. Drazic, The influence of zinc surface pretreatment on the adhesion of epoxy coating electrodeposited on hot-dip galvanized steel. Prog. Org. Coat.,Vol. 58, 2007, pp. 323-330.

[29] J. Bajat, V. B. MiškovicStankovic, J. P. Popic, D. Drazic, Adhesion characteristics and corrosion stability of epoxy coatings electrodeposited on phosphated hot-dip galvanized steel. Prog. Org. Coat.,Vol. 63, 2008, 201-208.