Failure Mode and Analysis of the Bonded/bolted Joints between a Hybrid Fibre Reinforced Polymer and Aluminium Alloy

Subject Areas : Composite materials

Yogesh  Lakshmi Narasimman ¹ (Department of Mechanical Engineering St. Joseph’s College Of Engineering, Chennai, India.)
Arunkumar  N ² (Department of Mechanical Engineering St. Joseph’s College Of Engineering, Chennai, India.)

Received: 2014-08-22 Accepted : 2015-07-05 Published : 2015-04-01

Keywords:

References:

1. Jin-Hwe Kweon, Jae-Woo Jung, Tae-Hwan Kim, Jin-Ho Choi, and Dong-Hyun Kim, “Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding,” Compos Struct, vol. 75, 2006, pp. 192–198.


2. P. P. Camanho, C. M. L. Tavares, R. de Oliveira, A. T. Marques, and A. J. M. Ferreira, “Increasing the efficiency of composite single-shear lap joints using bonded inserts,” Compos Part B, vol. 36, 2005, pp. 372–383.


3. Maofeng Fu and P. K. Mallick, “Fatigue of hybrid (adhesive/bolted) joints in SRIM composites,” Int J Adhes, vol. 21, 2001,
   pp. 145–159.


4. S. Gomez, J. Onoro, and J. Pecharroman, “ASimple mechanical model of a structural hybrid adhesive/riveted single lap joint,” Int J Adhes Adhes, vol. 27, 2007, pp. 263–267.


5. L. J. Hart-Smith, “Bonded-bolted composite joints,” J Aircr., vol. 22(11), 1985, pp. 993–1000,.


6. Young-Hwan Lee, Do-Wan Lim, Jin-Ho Choi, Jin-Hwe Kweon, and Myung-Keun Yoon, “Failure load evaluation and prediction of hybrid composite double lap joints,” Compos Struct, vol. 92, 2010, pp. 2916–2926.


7. Haider Al-Zubaidy, Xiao-Ling Zhao, and Riadh Al-Mahaidi, “Dynamic bond strength between CFRP sheet and steel,” Compos Struct, 2012.


8. Tien-Cuong Nguyen, Y. Bai, Xiao-Ling Zhao, and Riadh Al-Mahaidi, “Effects of ultraviolet radiation and associated elevated temperature on mechanical performance of steel/CFRP double strap joints,” Compos Struct, vol. 94, 2012, pp. 3563–3573.


9. R. Sarfaraz, P. Anastasios, Vassilopoulos, and T. Keller, “Experimental investigation and modeling of mean load effect on fatigue behaviour of adhesively-bonded pultruded GFRP joints,” Int J Fatigue, vol. 44, 2012, pp. 245–252.


10. Haider Al-Zubaidy, Riadh Al-Mahaidi, and Xiao-Ling Zhao, “Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads,” Compos Struct, vol. 94, 2012, pp. 510-518.


11. Kwang-Soo Kim, Jae-Seok Yoo, Yeong-Moo Yi, and Chun-Gon Kim, “Failure mode and strength of uni-directional composite single lap bonded joints with different bonding methods,” Compos Struct, vol. 72, 2006, pp. 477–485.


12. L. J. Hart-Smith, Mechanically fastened joints for advanced composites, phenomenological considerations and simple analysis. Plenum Press, 1980.


13. T. Ireman, “Three-dimensional stress analysis of bolted single-lap composite joints,” Compos Struct, vol. 43, 1998, pp. 195–216.


14. J. M. Whitney and R. J. Nuismer, “Stress fracture criteria for laminated composites containing stress concentrations,” J Compos Mater, vol. 8, 1974, pp. 253–265.


15. J. M. Whitney and R. J. Nuismer, “Uniaxial failure of composite laminated containing stress concentrations,” Fract. Mech. Compos., vol. 593, 1975, no. 117–142.


16. F. K. Chang and R. A. Scott, “Strength of mechanically fastened composite joints,” J Compos Mater, vol. 16, 1982, pp. 470–494.


17. F. K. Chang and R. A. Scott, “Failure of composite laminates containing pin loaded holes-method of solution,” J Compos Mater, vol. 18, 1984, pp. 255–278.


18. J. H. Choi and Y. J. Chun, “Failure load prediction of mechanically fastened composite joint,” J Compos Mater, vol. 37(24), 2003, pp. 2163–2177.


19. C. O. Ryu, J. H. Choi, and J. H. Kweon, “Failure load prediction of composite joints using linear analysis,” J Compos Mater, vol. 41(7), 2007, pp. 865–878.


20. G. Kelly, “Quasi-static strength and fatigue life of hybrid (bonded/bolted) composite single-lap joints,” Compos Struct, vol. 72, 2006, pp. 119–129.


21. F. Moroni, A. Pirondi, and F. Kleiner, “Experimental analysis and comparison of the strength of simple and hybrid structural joints,” Int J Adhes Adhes, vol. 30, 2010, pp. 367–379.


22. G. Kelly, “Load transfer in hybrid (bonded/bolted) composite single-lap joints,” Compos Struct, vol. 69, 2005, pp. 35–43.


23. R. Matsuzaki, M. Shibata, and A. Todoroki, “Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method,” Compos Part A, vol. 39, 2008, pp. 154–163.


24. S. V Joshi, L. T. Drzal, A. K. Mohanty, and S. Arora, “Are natural fiber composites environmentally superior to glass fiber reinforced composites?,” Compos Part A, vol. 35, 2004, pp. 371–376.


25. A. Lundahl, R. Fangueiro, F. Soutinho, and F. Duarte, “Waste Fibre Reinforced Ecocomposites,” Mater Sci Forum, vol. 636–637, 2010, pp. 1415–1420.