Characterization of Microstructure and Bending Response of Sheet Material: Influence of Thickness

Subject Areas : Chemistry

Mustafa Özdemir ¹ , Hakan Gökmese ² , H Dilipak ³ , V Yilmaz ⁴

1 - Machine and Metal Technology Department, Vocational High School, Bozok University, Yozgat, Turkey
2 - Materials and Metallurgical Department, Engineering Faculty, Necmettin Erbakan University, Konya, Turkey
3 - Manufacturing Engineering Department, Tecnology Faculty, Gazi University, Ankara, Turkey
4 - Motor Vehicles and Transportation Technologies Department, Kazan Vocational High School, Gazi University, Ankara, Turkey

Received: 2014-07-13 Accepted : 2014-12-05 Published : 2015-03-01

Keywords:

References:

 

 [1].   Ozdemir, M.; Gökmeşe, H.; Dilipak, H.; Yılmaz, V. ‘’Investigation as Experimental and Micro-structural of the Effect to Spring back/forward Amount of 16Mo3 (1.5415) Sheet Materials of Different Heat-Treatments’’, ISITES, Turkey, 2014,  pp. 148-155.

[2].    Bakhshi J.; Rahmani B.; Daeezade V.; Gorji, A. The Study of Spring-Back of CK67 Steel Sheet in V-Die and U- Die Bending Processes. Materials and Design 2009, 30, 2410-2419.

 

[3].   Ragai L.; Lazim D.; Nemes A. Anisotropy and Spring-back in Draw-Bending of Stainless Steel 410 Experimental and Numerical Study. Journal of Materials Processing Technology 2005, 166, 116-127.

 

[4].   Branko G.; Josip C.; Dejan G. Effect of Spring-Back and Spring-Forward in V-Die Bending of St1403 Sheet Metal Plates, Journal for Theory and Appl. in Mech Engineering 2010, 52, 181-186.

 [5].   Thipprakmas S. Finite Element Analysis on the Coined-bead Mechanism during the V-Bending Process. Materials and Design 2011, 32,4909-4917.

 [6].   Imai K.; Koyama J.; Jin Y. High-Accuracy V-Bending System by Real Time Identifying Material Property. Journal of Materials Processing Technology 2008, 201, 193-197.

 [7].   Li, X.; Yang, Y.; Wang, Y.; Bao, J.; Li, S. Effect of the material-hardening mode on the spring-back simulation accuracy of V-free bending. Journal of Materials Processing Technology 2002, 123, 209–211.

 [8].   Thipprakmas S.; Rojananan S. Investigation of Spring-go Phenomenon Using Finite Element Method.Materials and Design 2008, 29, 1526-1532.

 [9].   Thipprakmas S.; Phanitwong, W. Process parameter design of spring-back and spring-go in V-bending process using Taguchi technique, Materials and Design 2011, 32, 4430–4436.

 [10].  Thipprakmas S. Finite element analysis of punch height effect on V-bending angle. J Mater Des 2010, 31, 1593–8.

 [11].  Thipprakmas S. Effect of ratio of punch height to workpiece length in partial Vbending process. Steel Res Int 2010, 81, 769–72.

 [12].  Panthi SK, Ramakrishnan N, Ahmed M, Singh SS, Goel MD. Finite element analysis of sheet metal bending process to predict the springback. J Mater Des 2010, 31, 657–62.

 [13].  Dilipak, H.; Ozdemir, M.; Sarıkaya, M. Effects of Material Properties and Punch Tip Radius on Spring-go in 90° V Bending Processes. Journal of Iron and Steel Research, Internatıonal 2013, 20, 64-69.

 [14].   Ozdemir, M.; Dilipak, H. S235JR (1.0038) Sac Malzemeye Uygulanan Isıl İşlemlerin İleri Esneme Miktarına Etkisinin Deneysel Olarak İncelenmesi, 3. Ulusal Talaşlı İmalat Sempozyumu, Turkey, 2012, 345-353.

 [15].  Parsa, M.-H.; Nasher al ahkami, S.; Pishbin, H.; Kazemi, M. Investigating spring back phenomena in double curved sheet metals forming, Materials and Design 2012,41, 326-337.

 [16].  Kumar, D. K.; Appukuttan, K.K.; Neelakantha, V.L.; Padmayya, S.N. Experimental determination of spring back and thinning effect of aluminum sheet metal during L-bending operation. Materials and Design 2014, 56, 613-619.

 [17].  Tekaslan O.; Şeker U.; Gerger N. Determination of Copper Sheet Metal in “V” Bending Dies. Journal of the Faculty of Engineering and Architecture of Gazi University 2008, 23, 231-238.

 [18].  Tekaslan O.; Gerger, N.; Şeker U. Determination of spring-back of stainless steel sheet metal in “V” bending dies, Materials and Design 2008, 29, 1043-1050.

 [19].   Ozdemir M. The Experimental Investigation of Spring-Back of S235JR Sheet Metals within Bending Die. Master Thesis, Gazi University, Ankara, 2011.

 [20].  Savaşkan, T., Malzeme Bilgisi ve Muayenesi, Karadeniz Teknik Üniversitesi Makine Mühendisliği Bölümü, Trabzon, 2004, pp. 30-80.

 [21].  Dieter, G.-E. Workability Testing Tecniques, ASM International, Ohio, 2003, pp. 16-48.

 [22].  Fang, F.; Hu, X.;Zhang, B.; Xie, Z.; Jiang, J. Deformation of dual-structure medium carbon steel in cold drawing,Materials Science&Engineering 2013, 583, 78–83.

 [23].  Yan, P.; Liu, Z.; Bao, H.; Weng, Y.; Liu, W. Effect of normalizing temperature on the strength of 9Cr–3W-3Co martensitic heat resistant steel. Materials Science&Engineering 2014, 597, 148–156.