Designing a prefabricated sandwich composite roofing system Made up of resisting facings and light-weight concrete core with truss-shaped connectors

Subject Areas : Structural Engineering

Arash Totonchi ¹ , Allah dad Ahmadi ²

1 - Assistant Professor, Department of Civil Engineering, Islamic Azad University, Marvdasht branch, Iran
2 - Ph.D. candidate, Department of Civil Engineering, Structural trends, Islamic Azad University, Marvdasht branch, Iran

Received: 2017-08-10 Accepted : 2017-12-22 Published : 2024-09-25

Keywords:

References:

[1]     Ahmadi, A, Optimum design of an innovative one and two-way light-weight prefabricated, sandwich-type flooring panels Civil engineering, M.Scthesis,Razani,R,advisor.Science and Research center of fars province, Islamic Azad University, Shiraz, Iran, 2014.

[2]     Fadayi, J., Shayeste, A, The role of shear connectors on bending behavior of prefabricated sandwich panels (PCSP), Civilica Website, Danesh source, the fourth Civil engineering national congress, Iran, 2009.

[3]     Ahmadi, A., Razani, R. Designing and comparison of some samples of prefabricated concrete sandwiched ceiling slabs with Lightweight concrete core. Journal of Research and Development (Vol. 2, No.2, 2014-Page 9-20), 2014.

[4]     Benayoune,A.,Abang Ali, A.,Abdul samad,A.,And trikha, D,. (2007a). Flexural analysis of compositeone-and two-way sandwich slabs with truss-shaped connectors. Journal-The Institution of Engineers,Malaysia (vol. 68,No. 1,March, 2007.

[5]     Benayoune,A.، samad,A. A. A.,Abang Ali,A. A.,and  trikha,D. N,. (2007b). Response of pre-castreinforced composite sandwich panels to axial loading.Construction and building materials 21 (2007)677-685.

[6]     ABAQUS,Finite Element Program Theory Manual(version 6. 12. 1). Hibbit,Karlssson & Sorenson Inc.,USA,1993.

[7]     Kent, D.C,.park, R,.(1971). Flexural  Members with Confined  Concrete , Journal of Structural Division, Proceedings of the Amercican Society of Civil Engineers,Vol.97,No.ST7,1969-1990.

[8]     PCI committee on pre-cast concrete sandwich wall panels, State of the Art of Precast/Prestresses Sandwich Wall Panels, PCI J 1997;42(2): 92–133.

[9]     Einea A, Salmon D,C, Fogarasi G,J, Culp T, Tadros MK,. State - of- the-art of precast sandwich panel system. PCI J 1991; 36(6): 90 –101, 1991.

[10] Benayoune, A, Precast concrete sandwich panel as a building system, Ph.D. Thesis, Department of Civil Engineering, University of Putra, Malaysia, 2003.

[11] Einea, A, Structural and thermal efficiency of precast concrete sandwich panel system, Ph.D. thesis, Department of Civil Engineering University of Nebraska-Linkoln, Omaha, NE., 1992.

[12] Bush, T. D,. Stine, G. L, Flexural Behaviour ofcomposite Precast Concrete Sandwich Panels withContinuous Truss Connectors, PCI JOURNAL,Vol.39, No. 2, pp. 112-121. 1994.

[13] Benayoune,A,.Abdulsamad,A.A,Trikha,D.N,.Abang Ali, A.A ,. Ellinna, s.H.M Flexuralbehaviorof precast concrete sandwich composite panel-Exprimental and theoretical investigations . science direct. Construction and Building Materials 22 580-592, 2008.

[14] Schaumann, E ,. Vallee,T., and Keller,T, a. Direct load transmission  in san dwich slabs with lightweight concrete ore.TailorMadeConcrete Structures-Walraven& Stoelhorst(eds)2008.Taylor & Francis Group, London,lSBN 978-0-415-47535-8.

[15] Schaumann,E., vallee,T, and Keller,T, (2008b). Direct load transfer of hybrid FRP-concrete sandwich structure for bridge decks. Fourth International Composites in Civil Engineering (CICE2008)  2-24 July,zurich,Switzerland.

[16] Schaumann,E,. (2008c). Hybrid FRP-lightweight concrete sandwich system for Engineering structures. Thesis,Dipl.-Lag.,Vniversitat Karlsruhe Allemagne et De Nationalite Allemande .

[17] Ahmad,I,.Mohamad,N, Sructural Behaviour of precast lightweight concrete sandwich panel under Eccentric Load[18]:An over view. University Tun Hussein Onn Malaysia, 2011.

[18] Einea,A., Salmon, D .,Tadros, M ,.  Culp,T,. A new structurally and   thermally efficient  precast  sandwich  panel  system. PCI, Journal,July-August1994,90-101, 1994.

[19] Park, R.and paulay, T,. Rienforced Concrete Structures, Johen Wiley and Sons , 1975.

[20] Mohammed Hussin, A. D., Structural Behavior of Composite Sandwich Slab Panels. Journal of Engineering and Development, Vol. 17, No.4,October 2013,ISSN 1833-7822, 2013.

[21] Noridah Mohammad. A. I. Khalil, A.A,.Abdul Samad, W.I.Goh,. Structural Behavior of Precast Light-Weight Foam Concrete Sandwich Panel With Double Shear Truss Connectors Flexural Load. Hindawi Publishing corporation ISRN Civil Engineering Volume 2014, Article ID 317941,7, 2014.

[22] Mugahed Amran, Y.H.,Raizal , S,. M,. Rashid, Farzad Hejazi, Nor Azizi Safiee, A. A. Abang Ali Response of precast foamed concrete sandwich panelsto flexural loading. Journal ofBuildingEngineering7(2016)143–158,2016.