Optimizing speed and angle control of stepping motor by using field oriented control

Subject Areas : journal of Artificial Intelligence in Electrical Engineering

Ahad Golipour ¹

1 -

Received: 2015-11-17 Accepted : 2015-11-17 Published : 2014-12-01

Keywords:

References:

[1] Acarnley, P.P. (2002). “Stepping Motors: a
guide to theory and practice: Fourth
Edition”. Institution of Electrical Engineers,
London.
[2] Simon D. and Feucht D. (2001). ”DSPBased
Field-Oriented Step Motor Control,”

SHARC International DSP Conference,
Boston, PP: 303-309.
[3] Simon D. and Feucht D. (2001). ”DSPBased
Field-Oriented Step Motor Control,”
SHARC International DSP Conference,
Boston, 303-309.
[4] Microchip Technology Inc., “Stepping
Motor Fundamentals,” Literature Number:
AN907.
[5] Stengel R., “Optimal Control and
Estimation: First Edition,” Dover
Publication, Inc., New York.
[6] Bhavinkumar Shah (2004). FIELD
ORIENTED CONTROL OF STEP
MOTORS, Submitted in partial fulfillment
of requirements for the degree.
[7] Ohm D. and Oleksuk R. (1998). “On
practical Digital Current Regulator design
for PM Synchronous Motor drives,” IEEE
Applied Power Electronics Conference and
Exposition, Vol.1, PP: 56-63.
[8] Welch R.H., “Measuring Permanent
Magnet DC Motor Parameters- Part II:
Brushless DC Motors,” AIME, Reliance
Motion Control, Eden Prairie, Minnesota.
[9] Texas Instruments (1996). “Digital Signal
Processings Solutions for Motor Control
Using the TMS320F240 DSP-Controller,”
Literature number: SPRA 345.
[10] Obermeier C., Kellermann H., and
Brandenburg, G. (1997). “Sensorless field
oriented speed control of a hybrid and a
permanent magnet disk stepper motor using
an extended Kalman filter,” IEEE
International Electrical Machines and

Drives Conference Record, pp. MC3/5.1-
MC3/5.3.
[11] Moussa Bendjedia, Youcef Ait-Amirat,
Member, IEEE, Bernard Walther, and Alain
Berthon, Member, IEEE. (2012). Position
Control of a Sensorless Stepper Motor, IEEE
TRANSACTIONS ON POWER
ELECTRONICS, VOL. 27, NO. 2.
[12] Bhavinkumar Shah (2007). Field oriented
control of step motors engineering in
electrical engineering, SVMIT,
CLEVELAND STATE UNIVERSITY,
Bharuch, India.