The feasibility study of applying an acid boric and glass infiltrated mica to prevent the leakage and mixture of use gasses for hightemperature fuel cells
Subject Areas :
Hamid
Abdoli
1
(دکتری مهندسی مواد-دانشگاه تربیت مدرس)
Alireza
Hosseini Moghadam
2
(استادیار دانشگاه آزاد اسلامی واحد الیگودرز)
Seyed Amir
Rastialhosseini
3
(دکتری مهندسی مواد-دانشگاه تربیت مدرس)
Keywords: energy, Glass, environment, fuel cell, Microstructure, Mica, Gas leakage,
Abstract :
In this study, the possibility of using mica for this application was investigated. First, mica gasket includingsmall Phlogopite flakes with organic binders was used and its performance duringas leakage was simulated in asmall set-up simulating fuel cell operating condition (air atmosphere, temperature of 800 °C and time of 100 h).Due to heating of mica during operation, binders were burned out and remaining pores acted as leakage path.These leakage paths were filled by acid boric and the mica performance was enhanced up to 20%. The majorleakage path (mica and its adjacent interface) was filled by a glass and a successful application of mica-glasslayer was obtained for leakage prevention.
