Temperature and smoke profile of fire in the parking of a commercial building with Pyrosim software

Subject Areas : Journal of New Applied and Computational Findings in Mechanical Systems

Fatemeh Behbahani ¹ , mahdi hamzei ² , zahra mehrdoost ³ , mohammad moghiman ⁴

1 - Mechanic, ahvaz, Iran
2 - Department of Mechanical Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran
3 - Department of Mechanical Engineering, Ahvaz Branch, Islamic Azad University, Ahvaz, Iran
4 - Department of Mechanical Engineering, Ferdowsi University, Mashhad, Iran

Received: 2022-01-02 Accepted : 2022-03-14 Published : 2022-02-20

Keywords: smoke concentration, smoke control, Fire, temperature profile, pyrosim software,

Abstract :

In recent years, the use of parking space in large buildings has become popular. One of the dangers that always threatens buildings is the risk of fire. Smoke is generated after a fire. Smoke from fire poses a greater risk to life than fire. By controlling the smoke, the building and its occupants can be protected and the damage caused by the fire can be reduced. In this study, smoke distribution and temperature profiles in the parking lot of a commercial complex were investigated using Pyrosim software. Navier-Stokes equations for energy, Conservation of mass were used to solve, and Large Eddy Simulation model was used for turbulence. Two scenarios were considered to investigate the fire. In the first scenario, parking without a ventilation system was studied and in the second scenario, it was studied with the ventilation system. Exhaust fan was used to evacuate the smoke and a supply fan was used to supply fresh air. The results of these two simulations were compared with each other. The fire power was 4 MW. The results showed that in the first scenario, the smoke concentration is 0.003 mol / mol and the temperature is 80 ° C. In the second scenario, the smoke concentration is 0.0002 mol / mol, which is 93% better than the first scenario. The temperature also dropped to 28 ° C by evaporating the smoke in 1200 seconds. In fact, the temperature improved by 65% compared to the first scenario. Reducing the concentration of smoke and lowering the temperature make it easier for people to evacuate during a fire.

References:

[1]گل­محمدی، ر.، (1388)،  مهندسی حریق، فن­آوران، همدان، 408

[2]Chow, W.K. and Chow, C.L., (2011) , Simulating Smoke Filling in Big Halls by Computational Fluid Dynamics, Modelling and Simulation in Engineering, 2011, pp 1-16.

[3]Valasek, L. (2013), The Use of PyroSim Graphical User Interface For FDS Simulation of a Cinema Fire, International Journal Of Mathemathics And Computers In Simulations, 3 (7), pp 258-266.

 [4 ]Pietreanu C, Panaitescu V. (2013), Cheking Jet-Fan’s Fire Performance From Closed Car Parks Using Pyrosim Program. Materials and Mechanics;  8 (11), pp 153-156.

 [5] Zhang, G.w., Zhu, G.q., Yin, F.A., (2014), Whole Process Prediction Method for Temperature Field of Fire Smoke in Large Spaces. Procedia Engineering, 71, pp 310-315.

[6]Jevtik, R., (2015), Fire Simulation in House Conditions, , Standardizacija I Metrologija,16, pp160-166.

 [7] Xin, Ye., Jian, Ma., Lin, Shen,Y.x., Lin, L.y., (2016), Suppression effect of sprinkler system on fire spread in large commercial buildings, Procedia Engineering,135, pp 455-462.

[8] Khandoker, M.A.R., Mou, R.J, Muntaha, M.A., Rahman, M.A., (2018), Numerical simulation of fire in a multistoried ready-made garments factory using PyroSim, AIP Conference Proceedings: AIP Publishing LLC, 11, pp 1-7.

[9]Wang, X., Fleischmann, C., Spearpoint, M., (2020), Applying the FDS pyrolysis model to predict heat release rate in small-scale forced ventilation tunnel experiments. Fire Safety Journal.; 102946, pp 30491-30500

[10] Li, J., Beji, T., Brohez, S., Merci, B., (2020), CFD study of fire-induced pressure variation in a mechanically-ventilated air-tight compartment, Fire Safety Journal,115, pp 1-11.

[11] Ji, J., Zhu, L., Ding, L., Yu, L., Wan, H., (2020), Numerical investigation of external wind effect on smoke characteristics in a stairwell, Fire technology, 56(4):1681-702.

[12]Baalisampang, T., Saliba, E., Salehi, F., Garaniya, V., Chen, L., (2021), Optimisation of smoke extraction system in fire scenarios using CFD modelling. Process Safety and Environmental Protection,149, pp 508-517.

[13]Ji, J., Fu,Y.Y., Fan, C.G., Gao, Z.H., Li, K.Y., (2015), An Experimenal Investigation on Thermal Characteristics of Sidewall Fire in Corridor-like Structures With Varying Width, Heat Mass Transfer, 84, pp 562-570;.

[14] Hodges, J.L., Lattimer, B.Y., Luxbacher, K.D., (2019), Compartment fire predictions using transpose convolutional neural networks. Fire Safety Journal, 108: pp102854.

[15] Hu, G., (2020), Research on the Fire of High-rise Residential Building Based on Pyrosim Numerical Simulation. IOP Conference Series, Earth and Environmental Science, IOP Publishing

[16]Sun Q, Turkan Y. A BIM-based simulation framework for fire safety management and investigation of the critical factors affecting human evacuation performance. Advanced Engineering Informatics. 2020;44:101093

[17]Li, Z., Huang, H., Li, N., Zan, M.L.C, Law, K., (2020), An agent-based simulator for indoor crowd evacuation considering fire impacts. Automation in Construction,120:103395

[18]Truchot, B., Fouillen, F., Collet, S., (2018), An Experimental Evaluation of Toxic Gas Emissions from Vehicle Fires, Fire Safety Journal, 97, pp 111-118

[19] Viegas, J. C., (2020), The Use of Impulse Ventilation for Smoke Control in Underground Car Parks, Tunneling and Underground Space Technology, 25 (1), pp 42-53.

[20] Zhang, X.G., Guo, Y.C., Chan, C.K., Lin, W.Y., (2020), Numerical Simulations on Fire Spread and Smoke Movement in an Underground Car Park, Building and Environment, 42, pp 3466-3475