Using Profile Approach to Managing Thermoforming Process of Automotive Decoration Parts
Subject Areas :
Industrial Management
Karim Atashgar
1
(Assistant Professor of industrial engineering, Malek Ashtar University, Tehran, Iran)
Omid Asghari Zargarabadi
2
(M.A Student in Industrial Engineering, Malek Ashtar University, Tehran, Iran)
Received: 2018-01-06
Accepted : 2018-01-06
Published : 2014-08-23
Keywords:
Abstract :
In many manufacturing/ service cases, a process is monitored effectively by a functional relationship between an independent variable(s) and a response variable rather than measurements on a single quality specification or a quality specification vector. This regression relationship is referred to a profile in the statistical process control literature. Scientific reports address profile monitoring leads to a more effective quality management in the case that the relationship function is adopted correctly. Profile approach helps an industrial process management to analyze the behavior of quality specifications by a curve. In this paper, the management of thermoforming process for a cover part of the fender of SAMAND automotive is investigated. The model proposed for phase-I of this research address the capability of monitoring the process for phase-II of statistical control.
References:
aghaei A, Maserrat N, 2008. Monitoring of the disease: new user profiles Case Study: Lung Disease international journal of industrial engineering and production management 22, 54-63
Atashgar k, 2012. Advanced statistical quality control, chapter 6, Research & Educational Institute of defense industry, Tehran, Iran.
Moemeni M, Ghayoumi A.F, 2011. Statistical analysis with SPSS fourteen edition, chapter six, Momeni Press
Mahmoud MA, Woodall WH, F, 2004. Phase I analysis of linear profiles with calibration applications. Technometrics 46,380-391.
Rauwendaal C, 2013. Polymer Extrusion, 5th Edition, Hansen Publishers, Munich.
Rauwendaal C, 2000 Statistical Process Control in Injection Molding and Extrusion Hanser Publishers,Munich.
Kang L. & Albin SL, 2000.On-Line Monitoring When the Process Yields a Linear Profile, Journal of Quality Technology 32, 418-426
Neter J, Wasserman W, and Kutner MH, 1990.Applied Linear Statistical Models,Third Edition, Richard D. Irwin, Inc, Boston, MA.
Mestek O, Pavlik J, and Suchanek, M. 1994, Multivariate Control Charts: Control Charts for Calibration Curves, Fresenius Journal of Analytical Chemistry 350, 344-351
Young TM, Winistorfer PM., and Wang S, 1999.Multivariate Control Charts of MDF and OSB Vertical Density Profile Attributes. Forest Products Journal 49, 79-86.
Walker E and Wright S. 2002, Comparing Curves Using Additive Models, Journal of Quality Technology 34, 118-129
Jin J. and Shi, J. 1999, Feature-Preserving Data Compression of Stamping Tonnage Information Using Wavelets. Technometrics 41, 327-339.
Jin J. and Shi J. 2001, Automatic Feature Extraction of Waveform Signals for In-Process Diagnostic Performance Improvement. Journal of Intelligent Manufacturing 12, 257-268.
Colosimo BM, Pacella M, and Semeraro Q, 2008. Statistical process control for geometric specifications: On the monitoring of roundness profiles. Journal of Quality Technology 40, 1-18
Atashgar K, Amir A, Keramatee Nejad M, 2015. Monitoring Allan variance nonlinear profile using artificial neural network approach Quality Engineering and Technology 5,162-177
Vaghefi A, Tajbakhsh SD, Noorossana R, 2009. Phase II monitoring of nonlinear profiles. Communications in Statistics-Theory and Methods 38, 1834-1851.
Noorossana R, Eyvazian M, Amiri A, Mahmoud MA, 2010. Statistical monitoring of multivariate multiple linear regression profiles in Phase I with calibration application. Quality and Reliability Engineering International 26(3), 291–303.
Amiri A, Changliang Z and Mohammad H, 2014.Monitoring Correlated Profile and Multivariate Quality Characteristics Quality and Reliability Engineering International 30, 133-142.
Zou C, Ning X, Tsung F, 2012. LASSO-based multivariate linear profile monitoring.Annals of Operations Research 192.3–19.
Yeh AB, Huwang L, Li YM, 2009. Profile monitoring for a binary response. IIE Transactions 41.931–941.
Kazemzadeh RB, Noorossana R, Amiri A, 2008. Phase-I monitoring of polynomial profiles. Communications in Statistics-Theory and Methods 37, 1671-1686.
Amiri A, Jensen WA, & Kazemzadeh RB, 2010. A case study on monitoring polynomial profiles in the automotive industry. Quality and Reliability Engineering International 26, 509-520
Qiu P, Zou C, Wang Z,2010.Nonparametric Profile Monitoring by Mixed Effects Modeling. Technometrics 52,265–277.
Moguerza JM, Muoz A, Psarakis S, 2007. Monitoring nonlinear profiles using support vectormachines. Lecture Notes in Computer Science 4789, 574–583.
Ding Y, Zeng L, Zhou S, 2006.Phase I analysis for monitoring nonlinear profiles in manufacturing processes. Journal of Quality Technology, 38,199–216.
_||_
Saghaei A, Maserrat N, 2008. Monitoring of the disease: new user profiles Case Study: Lung Disease international journal of industrial engineering and production management 22, 54-63
Atashgar k, 2012. Advanced statistical quality control, chapter 6, Research & Educational Institute of defense industry, Tehran, Iran.
Moemeni M, Ghayoumi A.F, 2011. Statistical analysis with SPSS fourteen edition, chapter six, Momeni Press
Mahmoud MA, Woodall WH, F, 2004. Phase I analysis of linear profiles with calibration applications. Technometrics 46,380-391.
Rauwendaal C, 2013. Polymer Extrusion, 5th Edition, Hansen Publishers, Munich.
Rauwendaal C, 2000 Statistical Process Control in Injection Molding and Extrusion Hanser Publishers,Munich.
Kang L. & Albin SL, 2000.On-Line Monitoring When the Process Yields a Linear Profile, Journal of Quality Technology 32, 418-426
Neter J, Wasserman W, and Kutner MH, 1990.Applied Linear Statistical Models,Third Edition, Richard D. Irwin, Inc, Boston, MA.
Mestek O, Pavlik J, and Suchanek, M. 1994, Multivariate Control Charts: Control Charts for Calibration Curves, Fresenius Journal of Analytical Chemistry 350, 344-351
Young TM, Winistorfer PM., and Wang S, 1999.Multivariate Control Charts of MDF and OSB Vertical Density Profile Attributes. Forest Products Journal 49, 79-86.
Walker E and Wright S. 2002, Comparing Curves Using Additive Models, Journal of Quality Technology 34, 118-129
Jin J. and Shi, J. 1999, Feature-Preserving Data Compression of Stamping Tonnage Information Using Wavelets. Technometrics 41, 327-339.
Jin J. and Shi J. 2001, Automatic Feature Extraction of Waveform Signals for In-Process Diagnostic Performance Improvement. Journal of Intelligent Manufacturing 12, 257-268.
Colosimo BM, Pacella M, and Semeraro Q, 2008. Statistical process control for geometric specifications: On the monitoring of roundness profiles. Journal of Quality Technology 40, 1-18
Atashgar K, Amir A, Keramatee Nejad M, 2015. Monitoring Allan variance nonlinear profile using artificial neural network approach Quality Engineering and Technology 5,162-177
Vaghefi A, Tajbakhsh SD, Noorossana R, 2009. Phase II monitoring of nonlinear profiles. Communications in Statistics-Theory and Methods 38, 1834-1851.
Noorossana R, Eyvazian M, Amiri A, Mahmoud MA, 2010. Statistical monitoring of multivariate multiple linear regression profiles in Phase I with calibration application. Quality and Reliability Engineering International 26(3), 291–303.
Amiri A, Changliang Z and Mohammad H, 2014.Monitoring Correlated Profile and Multivariate Quality Characteristics Quality and Reliability Engineering International 30, 133-142.
Zou C, Ning X, Tsung F, 2012. LASSO-based multivariate linear profile monitoring.Annals of Operations Research 192.3–19.
Yeh AB, Huwang L, Li YM, 2009. Profile monitoring for a binary response. IIE Transactions 41.931–941.
Kazemzadeh RB, Noorossana R, Amiri A, 2008. Phase-I monitoring of polynomial profiles. Communications in Statistics-Theory and Methods 37, 1671-1686.
Amiri A, Jensen WA, & Kazemzadeh RB, 2010. A case study on monitoring polynomial profiles in the automotive industry. Quality and Reliability Engineering International 26, 509-520
Qiu P, Zou C, Wang Z,2010.Nonparametric Profile Monitoring by Mixed Effects Modeling. Technometrics 52,265–277.
Moguerza JM, Muoz A, Psarakis S, 2007. Monitoring nonlinear profiles using support vectormachines. Lecture Notes in Computer Science 4789, 574–583.
Ding Y, Zeng L, Zhou S, 2006.Phase I analysis for monitoring nonlinear profiles in manufacturing processes. Journal of Quality Technology, 38,199–216.
