Effect of Carbon Nanotube Geometries on Mechanical Properties of Nanocomposite Via Nanoscale Representative Volume Element

Subject Areas : Engineering

F Moghaddam ¹ , E Ghavanloo ² , S.A Fazelzadeh ³

1 - Department of Mechanical Engineering, Sharif University of Technology, Tehran
2 - School of Mechanical Engineering, Shiraz University
3 - School of Mechanical Engineering, Shiraz University

Received: 2016-06-15 Accepted : 2016-08-17 Published : 2016-09-20

Keywords:

References:

[1] Hahn H.T., Tsai S.W., 1980, Introduction to Composite Materials, Taylor & Francis, Pennsylvania.
[2] Hu H., Onyebueke L., Abatan A., 2010, Characterizing and modeling mechanical properties of nanocomposites- review and evaluation, Journal of Minerals and Materials Characterization and Engineering 2: 275-319.
[3] Liu H., Brinson L.C., 2008, Reinforcing efficiency of nanoparticles: A simple comparison for polymer nanocomposites, Composites Science and Technology 68(6): 1502-1512.
[4] Song Y.S., Youn J.R., 2006, Modeling of effective elastic properties for polymer based carbon nanotube composites, Polymer 47(5): 1741-1748.
[5] Wang J., Li Z., Fan G., Pan H., Chen Z., Zhang D., 2012, Reinforcement with graphene nanosheets in aluminum matrix composites, Scripta Materialia 66(8): 594-597.
[6] Liu Y.J., Chen X.L., 2003, Evaluations of the effective material properties of carbon nanotube-based composites using a nanoscale representative volume element, Mechanics of Materials 35(1–2): 69-81.
[7] Selmi A., Friebel C., Doghri I., Hassis H., 2007, Prediction of the elastic properties of single walled carbon nanotube reinforced polymers: A comparative study of several micromechanical models, Composites Science and Technology 67(10): 2071-2084.
[8] Han Y., Elliott J., 2007, Molecular dynamics simulations of the elastic properties of polymer/carbon nanotube composites, Computational Materials Science 39: 315-323.
[9] Karimzadeh F., Ziaei-Rad S., Adibi S., 2007, Modeling considerations and material properties evaluation in analysis of carbon nano-tubes composite, Metallurgical and Materials Transactions B 38: 695-705.
[10] Giannopoulos G.I., Georgantzinos S.K., Anifantis N.K., 2010, A semi-continuum finite element approach to evaluate the Young’s modulus of single-walled carbon nanotube reinforced composites, Composites Part B: Engineering 41(8): 594-601.
[11] Shady E., Gowayed Y., 2010, Effect of nanotube geometry on the elastic properties of nanocomposites, Composites Science and Technology 70(10): 1476-1481.
[12] Gómez-del Río T., Poza P., Rodríguez J., García-Gutiérrez M.C., Hernández J.J., Ezquerra T.A., 2010, Influence of single-walled carbon nanotubes on the effective elastic constants of poly(ethylene terephthalate), Composites Science and Technology 70(2): 284-290.
[13] Shokrieh M.M., Rafiee R., 2010, Investigation of nanotube length effect on the reinforcement efficiency in carbon nanotube based composites, Composite Structures 92: 2415-2420.
[14] Wernik J.M., Meguid S.A., 2011, Multiscale modeling of the nonlinear response of nano-reinforced polymers, Acta Mechanica 217: 1-16.
[15] Chatzigeorgiou G., Seidel G.D., Lagoudas D.C., 2012, Effective mechanical properties of “fuzzy fiber” composites, Composites Part B: Engineering 43(6): 2577-2593.
[16] Kundalwal S.I., Ray M.C., 2012, Effective properties of a novel composite reinforced with short carbon fibers and radially aligned carbon nanotubes, Mechanics of Materials 53: 47-60.
[17] Joshi U.A., Sharma S.C., Harsha S.P., 2012, Effect of carbon nanotube orientation on the mechanical properties of nanocomposites, Composites Part B: Engineering 43(4): 2063-2071.
[18] Rafiee R., Fereidoon A., Heidarhaei M., 2012, Influence of non-bonded interphase on crack driving force in carbon nanotube reinforced polymer, Computational Materials Science 56: 25-28.
[19] Bhuiyan M.A., Pucha R.V., Worthy J., Karevan M., Kalaitzidou K., 2013, Understanding the effect of CNT characteristics on the tensile modulus of CNT reinforced polypropylene using finite element analysis, Computational Materials Science 79: 368-376.
[20] Huang J., Rodrigue D., 2013, Equivalent continuum models of carbon nanotube reinforced polypropylene composites, Materials & Design 50: 936-945.
[21] Hu Z., Arefin M.R.H., Yan X., Fan Q.H., 2014, Mechanical property characterization of carbon nanotube modified polymeric nanocomposites by computer modeling, Composites Part B: Engineering 56: 100-108.
[22] Montinaro N., Pantano A., 2014, Parameters influencing the stiffness of composites reinforced by carbon nanotubes – A numerical–analytical approach, Composite Structures 109: 246-252.
[23] Huang J., Rodrigue D., 2014, The effect of carbon nanotube orientation and content on the mechanical properties of polypropylene based composites, Materials & Design 55: 653-663.
[24] Arash B., Wang Q., Varadan, V. K., 2014, Mechanical properties of carbon nanotube/polymer composites, Scientific Reports 4 : 6479.
[25] Wang J.F., Liew K.M., 2015, On the study of elastic properties of CNT-reinforced composites based on element-free MLS method with nanoscale cylindrical representative volume element, Composite Structures 124: 1-9.
[26] Kulkarni M., Carnahan D., Kulkarni K., Qian D., Abot J.L., 2010, Elastic response of a carbon nanotube fiber reinforced polymeric composite: A numerical and experimental study, Composites Part B: Engineering 41(5): 414-421.
[27] Chen X.L., Liu Y.J., 2004, Square representative volume elements for evaluating the effective material properties of carbon nanotube-based composites, Computational Materials Science 29(1): 1-11.
[28] Timoshenko S.P., Goodier J.N., 1987, Theory of Elasticity, McGraw-Hill, New York.
[29] Masud M., Masud A., 2010, Effect of interphase characteristic and property on axial modulus of carbon nanotube based composites, Journal of Mechanical Engineering 41(1): 15-24.
[30] Zuberi M.J.S., Esat, V., 2015, Investigating the mechanical properties of single walled carbon nanotube reinforced epoxy composite through finite element modeling, Composites: Part B 71: 1-9.
[31] Wan H., Delale F., Shen L., 2005, Effect of CNT length and CNT-matrix interphase in carbon nanotube (CNT) reinforced composites, Mechanics Research Communications 32(5): 481-489.