Effect of Compressive Residual Stress on the Corner Crack Growth

Subject Areas : Engineering

M.H Gozin ¹ , M Aghaie-Khafri ²

1 - Department of Mechanical Engineering, K.N. Toosi University of Technology
2 - Department of Mechanical Engineering, K.N. Toosi University of Technology

Received: 2013-05-04 Accepted : 2013-08-17 Published : 2013-12-30

Keywords:

References:

[1] Jones K.W., Dunn M.L., 2009, Predicting fatigue crack growth from a preyielded hole, International Journal of Fatigue 31:223-230.

[2] Parker A.P., 1982, Residual stress effects in fatigue, ASTM STP 776, American Society for Testing and Materials 13-31.

[3] Elber W., 1970, Fatigue crack closure under cyclic tension, Engineering Fracture Mechanics 2 :37-45.

[4] Elber W., 1971, The significance of fatigue crack closure damage tolerance in aircraft structures, ASTM STP486, American Society for Testing and Materials 230-242.

[5] Schijve J., 1988, Fatigue crack closure: observations and technical significance mechanics of fatigue crack closure, ASTM STP 982, American Society for Testing and Materials 6-34.

[6] Solanki K., Daniewicz S.R., Newman J.C., 2004, Finite element analysis of plasticity-induced fatigue crack closure:an overview, Engineering Fracture Mechanics 71:149-171.

[7] McClung RC., Sehitoglu H., 1989, On the finite element analysis of fatigue crack closure-1.basic modeling issues, Engineering Fracture Mechanics 33:237-252.

[8] Ismonov S., Daniewicz S.R., 2010, Simulation and comparison of several crack closure assessment methodologies using three-dimensional finite element analysis, International Journal of Fatigue 32:1322-1329.

[9] Chermahini R.G., Blom A.F., 1991, Variation of crack-opening stresses in three-dimensions: finite thickness plate, Theoretical and Applied Fracture Mechanics 15:267-276.

[10] Newman J.C., Raju I.S., 1981, An empirical stress-intensity factor equation for the surface crack, Engineering Fracture Mechanics 15:185-192.

[11] Connolly M.P., Collins R., 1987, The measurement and analysis of semi-elliptical surface fatigue crack growth, Engineering Fracture Mechanics 26:897-911.

[12] Mc Fadyen N.B, Bell N.B., Vosikovsky O., 1990, Fatigue crack growth of semi-elliptical surface cracks, International Journal of Fatigue 12:43-50.

[13] Shin C.S, 1991, Some aspect of corner fatigue crack growth from holes, Journal of Fatigue 13:233-240.

[14] Hou C.Y., 2008, Simultaneous simulation of closure behavior and shape development of fatigue surface cracks, International Journal of Fatigue 30:1036-1046.

[15] Hou C.Y., 2011, Simulation of surface crack shape evolution using the finite element technique and considering the crack closure effects, International Journal of Fatigue 33:719-726.

[16] Carlson S.S., 2008, Application of Beta Corrections to Model and Predict fatigue Crack Growth at Cold Expanded Holes in 2024-T351 Aluminum alloys, M.S. Thesis, The University of Utah.

[17] Anderson T.L., 2004, Fracture Mechanics: Fundamentals and Applications, CRC press.

[18] Broek D., 1982, Elementary Engineering Fracture Mechanics, Martinus Nijhoff Publishers.

[19] Hasanov A., Seyidmamedov Z.M., 2007, A finite element analysis and remeshing algorithm for an axisymmetric elasto-plastic contact problem related to indentation measurements, Materials & Design 28:62-70.

[20] Maligno A.R., Rajaratnam S., Leen S.B., Williams E.J., 2010, A three-dimensional (3D) numerical study of fatigue crack growth using remeshing techniques, Engineering Fracture Mechanics 77:94-111.

[21] Khoei A. R., 2005, Computational Plasticity in Powder Forming Processes, Elsevier Ltd.

[22] Hamel V., Roelandt J.M., Gacel J. N., Schmit F., 2000, Finite element modeling of clinch forming with automatic remeshing, Computers and Structures 77:185-200.

[23] LaRue J.E., Daniewicz S.R., 2007, Predicting the effect of residual stress on fatigue crack growth, International Journal of Fatigue 29:508-515.

[24] Liu A.F., 1979, The effect of residual stresses on crack growth from a Hole,. Northrop Corporation Aircraft Group 74-79.

[25] Gozin M.H., Aghaie-Khafri M., 2012, 2D and 3D finite element analysis of crack growth under compressive residual stress field, International Journal of Solids andStructures 49:3316-3322.

[26] Jones K.W., 2009, Predicting Fatigue Crack Growth Through Residual Stress Fields, Ph.D. Thesis, University of Colorado.

[27] Pilarczyk R., 2008, Beta Corrections to Predict Fatigue Crack Growth at Cold Expanded Holes in 7075-T651 Aluminum Alloy, M.Sc. Thesis, The University of Utah.

[28] Fatigue Technologies Inc, 2002, Cold Expansion Holes Using the Standard Split Sleeve System and Countersink Cold Expansion.

[29] Pavier M.J., Ponssard C.G.C., Smith D.J., 1998, Finite element modelling of the interaction of residual stress with mechanical load for a crack emanating from a cold worked fastener hole, The Journal of Strain Analysis for Engineering Design 33 (4):275-289.

[30] Solanki K., Daniewicz S.R., Newman J.C. 2004, A new methodology for computing crack opening values from finite element analyses, Engineering Fracture Mechanics 71:1165-1175.