Study Of Thermoelastic Damping in an Electrostatically Deflected Circular Micro-Plate Using Hyperbolic Heat Conduction Model

Subject Areas : Engineering

G Rezazadeh ¹ , S Tayefeh-rezaei ² , A Saeedi Vahdat ³ , V Nasirzadeh ⁴

1 - Mechanical Engineering Department, Urmia University
2 - Mechanical Engineering Department, Urmia University
3 - Photo-Acoustics Research Laboratory, Nanomechanics/Nanomaterials, Department of Mechanical & Aeronautical Engineering, Clarkson University, Potsdam, NY, USA
4 - Mechanical Engineering Department, Islamic Azad University, Arak Branch

Received: 2011-07-02 Accepted : 2011-08-16 Published : 2011-09-30

Keywords:

References:

[1] Rezazadeh G., Vahdat A.S., Pesteii S.M., Farzi B., 2009, Study of thermoelastic damping in capacitive micro-beam resonators using hyperbolic heat conduction model, Sensors and Transducers Journal 108(9): 54-72.

[2] Fang D., Sun Y., Soh A.K., 2007, Advances in thermoelastic damping in micro and nano- mechanical resonators, Solid Mechanics and Materials Engineering, doi:10/1299/jmmp.1.18.

[3] Sun Y., Tohmyoh H., 2009, Thermoelastic damping of the axisymmetric vibration of circular plate resonators, Sound and Vibration, doi:10.1016/j.jsv.2008.06.017.

[4] Nayfeh A.H., Younis M.I., 2004, Modeling and simulations of thermoelastic damping in Microplates, Micromechanics and Microengineering, doi:10.1088/0960-1317/14/12/016.

[5] Ardito R., Comi C., Corigliano A., Frangi A., 2008, Solid damping in micro electro mechanical systems, Meccanica, doi:10.1007/s11012-007-9105-3.

[6] Vengallatore S., 2005, Analysis of thermoelastic damping in laminated composite micromechanical beam resonators, Micromechanics and Microengineering, doi:10.1088/0960-1317/15/12/023.

[7] Houston B.H., Photiadis D.M., Marcus M.H., Bucaro J.A., Liu X., Vignola J.F., 2002, Thermoelastic loss in microscale oscillators, Applied Physics Letters 80(7): 90-99.

[8] M´endez C., Paquay S., Klapka I., Raskin J.-P., 2009, Effect of geometrical nonlinearity on MEMS thermoelastic damping, Nonlinear Analysis, doi:10.1016/j.nonrwa.2008.02.002.

[9] Liua X., Hauckea H., Vignolab J.F., Simpsona H.J., Baldwina J.W., Houstona B.H., Photiadis D.M., 2009, Understanding the internal friction of a silicon micro-mechanical oscillator, Materials Science and Engineering, doi:10.1016/j.msea.2008.10.065.

[10] Duwel A., Candler R.N., Kenny T.W., Varghese M., 2006, Engineering MEMS resonators with low thermoelastic damping, JMEMS Journal 15(6): 1437-1445.

[11] Sudipto K. D., Aluru N. R., 2006, Theory of thermoelastic damping in electrostatically actuated microstructures, Physical Review B, doi:10.1103/PhysRevB.74.144305.

[12] Lifshitz R., Roukes M. L., 2000, Thermoelastic damping in micro- and nano mechanical systems, Physical Review B 61(8): 5600-5609.

[13] Wong S.J., Fox C.H.J., William S.M., 2006, Thermoelastic damping of the in-plane vibration of thin silicon rings, Sound and Vibration 293 (1-2): 266–285.

[14] Lu P., Lee H.P., Lu C., Chen H.B., 2008, Thermoelastic damping in cylindrical shells with application to tubular oscillator structures, Mechanical Sciences, doi:10.1016/j.ijmecsci.2007.09.016.

[15] Zamanian M., Khadem S.E., 2010, Analysis of thermoelastic damping in micro resonators by considering the stretching effect, Mechanical Sciences, doi:10.1016/j.ijmecsci.2010.07.001.

[16] Choi J., Cho M., Rhim J., 2010, Efficient prediction of the quality factors of micromechanical resonators, Sound and Vibration, doi:10.1016/j.jsv.2009.09.013.

[17] Muller C., Baborowski J., Pezous A., Dubois M.A., 2009, Experimental evidence of thermoelastic damping in silicon tuning fork, in: Proceedings of the Eruosensors XXIII conference, Lausanne, Switzerland , 1395–1398.

[18] Zener C., 1937, Internal friction in solids. I. Theory of internal friction in reeds, Physical Review 52(3): 230-235.

[19] Zener C., 1938, Internal friction in solids. II. General theory of thermoelastic internal friction, Physical Review 53(1): 90-99.

[20] Lepage S., 2006, Stochastic finite element method for the modeling of thermoelastic damping in microresonators, Ph. D. Dissertation, University of Liege, Department of Aerospace and Mechanics.

[21] Lifshitz R., 2002, Phonon-mediated dissipation in micro- and Nano-mechanical systems, Physica B (316-317): 397-399.

[22] Goken J., Riehemann W., 2002, Thermoelastic damping of the low density metals AZ91 and DISPAL, Materials Science and Engineering A (324):134-140.

[23] Vahdat A.S, Rezazadeh G., 2011, Effects of axial and residual stresses on thermoelastic damping in capacitive micro-beam resonator, Franklin Institute Journal 384(4):622-639.

[24] Vahdat A.S, Rezazadeh G., Ahmadi G., 2012, Thermoelastic damping in a micro-beam resonator tunable with piezoelectric layers, Acta Mechanica Solidia Sinica 25(1):73-81.

[25] Yi Y.B., 2008, Geometric effects on thermoelastic damping in MEMS resonators, Sound and Vibration, doi:10.1016/j.jsv.2007.07.055.

[26] Rezazadeh G., Tahmasebi A., Zubstov M., 2006, Application of piezoelectric layers in electrostatic MEM actuators: controlling of pull-in voltage, Microsystem Technology 12(12): 1163-1170.

[27] Sun Y., Saka M., 2010, Thermoelastic damping in micro-scale circular plate resonators, Sound and Vibration, doi:10.1016/j.jsv.2009.09.014

[28] Sun Y., Saka M., 2008, Vibrations of microscale circular plates induced by ultra-fast lasers, Mechanical Sciences, doi:10.1016/j.ijmecsci.2008.07.006.

[29] Hao Z., 2008, Thermoelastic damping in the contour-mode vibrations of micro- and nano-electromechanical circular thin-plate resonators, Sound and Vibration, doi:10.1016/j.jsv.2007.11.035.

[30] Xuefeng S., Xiaoqing Z., Jinxiang Z., 2000, Thermoelastic free vibration of clamped circular plate, Applied Mathematics and Mechanics, 21(6):715-724.

[31] Rezazadeh G., Rezaei S.T., Jafar G., Tahmasebi A., 2007, Investigation of the pull-in phenomenon in drug delivery micropump using galerkin method, Sensors and Transducers 78(4):1098-1107.

[32] Gere J. M., Timoshenko S.P., 1997, Mechanics of Materials, PWS publishing Co, Boston, MA., Fourth Edition.

[33] Lobontiu N.O., 2005, Mechanical Design of Microresonators, McGraw-HILL Nanoscience and Technology Series.

[34] Sharpe W. N., Hemker K. J., Edwards R. L., 2004, Mechanical properties of MEMS materials, Final Technical Report, AFRL-IF-RS-TR-2004-76.

[35] Yasumura K.Y, Stowe T.D, Chow E.M, Pfafman T, Kenny T.W, Stipe B.C, Rugar D., 2000, Quality factors in micron- and submicron-thick cantilevers, Microelectromechanical Systems 9(1): 117-125.