Design and Dynamic Modeling of Planar Parallel Micro-Positioning Platform Mechanism with Flexible Links Based on Euler Bernoulli Beam Theory

Subject Areas : Engineering

N.S Viliani ¹ , H Zohoor ² , M.H Kargarnovin ³

1 - Department of Mechanical and Aerospace Engineering, Science and Research Branch, Islamic Azad University
2 - Center of Excellence in Design, Robotics, and Automation, Sharif University of Technology; Fellow, The Academy of Sciences of Iran,
3 - School of Mechanical Engineering, Sharif University of Technology

Received: 2013-03-24 Accepted : 2013-05-16 Published : 2013-06-30

Keywords:

References:

[1] Lobontiu N., 2003, Compliant Mechanisms Design of Flexure Hinges, CRC Press, Florida.

[2] Yi B.J., Chung G.B., Na H.Y., Kim W.K., Suh I.H., 2003, Design and experiment of a 3-DOF parallel micromechanism utilizing flexure hinges, IEEE Transactions on Robotics and Automation 19: 604-612.

[3] Yong Y.K., Fu L.T., 2009, Kinetostatic modeling of a 3-RRR compliant micro-motion stages with flexure hinges, Mechanism and Machine Theory 44: 1156-1175.

[4] Yong Y.K., Fu L.T., 2008, The effect of the accuracies of flexure hinge equations on the output compliances of planar micro-motion stages, Mechanism and Machine Theory 43: 347-363.

[5] Yong Y.K., Fu L.T., 2009, Comparison of circular flexure hinge design equations and the derivation of empirical stiffness formulations, IEEE/ASME International Conference on Advanced Intelligent Mechatronics Suntec Convention and Exhibition Center, doi:10.1109/AIM.2009.5229961.

[6] Paros J.M., Weisbord L., 1965, How to design flexure hinges, Machine Design 37: 151-156.

[7] Anathasuresh G.K., Kota S., 1995, Designing compliant mechanisms, ASME Mechanical Engineering117: 93-96.

[8] Murphy M.D., Midha A., Howell L.L., 1996, The topological synthesis of compliant mechanisms, Mechanism and Machine Theory 31: 185-199.

[9] Tokin, 1996, Multilayer Piezoelectric Actuators, User’s Manual, Tokin Corporate Publisher.

[10] Saggere L., Kota S., 1997, Synthesis of distributed compliant mechanisms for adaptive structures application: an elasto-kinematic approach, Proceedings of the DETC 1997, ASME Design Engineering Technical Conferences, Sacramento, CA.

[11] Kota S., Joo J., Li Z., Rodgers S.M., Sniegowski J., 2001, Design of compliant mechanisms: applications to MEMS, Analog Integrated Circuits and Signal Processing-An international journal 29: 7-15.

[12] Rong Y.,Zhu Y., Luo Z., Xiangxi L., 1994, Design and analysis of flexure hinge mechanism used in micro-positioning stages, ASME proceeding of the 1994 international Mechanical Engineering Congress and Exposition 68: 979-985.

[13] Her I., Cheng J.C., 1994, A linear scheme for the displacement analysis of micro positioning stages with flexure hinges, ASME Journal of Mechanical Design 116: 770-776.

[14] Trindade M.A., Sampaio R., 2002, Dynamics of beams undergoing large rotations accounting for arbitrary axial deformation, AIAA journal of Guidance, Control and dynamics 25: 634-643.

[15] Yong Y.K., Lu T.F., Handley D.C., 2008, Review of circular flexure hinge design equations and derivation of empirical formulations, Precision Engineering 32: 63–70.

[16] Lobontiu N., Paine J.S.N., Garcia E., Goldfarb M., 2001, Corner-filleted flexure hinges, Transactions of the ASME, Journal of Mechanical Design 123: 346-352.

[17] Shim J., Song S.K., Kwon D.S., Cho H.S., 1997, Kinematic feature analysis of a 6-degree of freedom in-parallel manipulator for micro-positioning surgical, Proceedings of 1997 IEEE/RSJ International Conference on Intelligent Robots and Systems 3:1617-1623.

[18] Ryu J.W., Gweon D., Moon K.S., 1997, Optimal design of a flexure hinge based xyθ wafer stage, Precision Engineering 21: 18-28.

[19] Meirovitch L., 2001, Fundamentals of Vibrations, MC Grow Hill, New York.

[20] Yu H.Y., Bi S., Zong G., Zhao W., 2004, Kinematics feature analysis of a 3 DOF compliant mechanism for micro manipulation, Chinese Journal of Mechanical Engineering 17: 127-131.

[21] Choi K.B., Kim D.H., 2006, Monolithic parallel linear compliant mechanism for two axes ultraprecision linear motion, Review of Scientific Instruments 77(6): 065106.

[22] Tian Y., Shirinzadeh B., Zhang D., Zhong Y., 2010, Three flexure hinges for compliant mechanism designs based on dimensionless graph analysis, Precision Engineering 34: 92–100.

[23] Baruh H., 1999, Analytical Dynamics, McGraw-Hill.

[24] Dwivedy S.K., Wberhard P., 2006, Dynamic analysis of flexible manipulators, a literature review, Mechanism and Machine Theory 41: 749-777.

[25] Nayfeh A.H., 1981, Introduction to Perturbation Techniques, John Wiley & Sons, Inc.

[26] Benosman M., Vey G.L., 2004, Control of flexible manipulators: a survey, Robotica 22: 533-545.

[27] Lee J.D., Geng Z., 1993, Dynamic model of a flexible Stewart platform, Computers and Structures 48: 367-374.

[28] Zhou Z., Xi J., Mechefske C.K., 2006, Modeling of a fully flexible 3PRS manipulator for vibration analysis, Journal of Mechanical Design 128: 403-412.

[29] Piras G., Cleghorn W.L., Mills J.K., 2005, Dynamic finite-element analysis of planar high speed, high-precision parallel manipulator with flexible links, Mechanism and Machine Theory 40: 849-862.

[30] Wang X., Mills J.K., 2005, FEM dynamic model for active vibration control of flexible linkages and its application to a planar parallel manipulator, Journal of Applied Acoustics 66: 1151-1161.