Thermal Stress Analysis of a Composite Cylinder Reinforced with FG SWCNTs

Subject Areas : Engineering

A Ghorbanpour Arani ¹ , S Amir ² , V Sadooghi ³ , M Mohammadimehr ⁴

1 - Department of Mechanical Engineering, Faculty of Engineering, University of Kashan--- Institute of Nanoscience & Nanotechnology, University of Kashan
2 - Department of Mechanical Engineering, Faculty of Engineering, University of Kashan
3 - Department of Mechanical Engineering, Faculty of Engineering, University of Kashan
4 - Department of Mechanical Engineering, Faculty of Engineering, University of Kashan

Received: 2011-04-26 Accepted : 2011-06-16 Published : 2011-06-30

Keywords:

References:

[1] Saito R., Dresselhaus G., Dresselhaus M.S., 1998, Physical Properties of Carbon Nanotubes, Imperial College Press, London.

[2] Qian D., Wagner G.J., Liu W.K., Yu M.F., Ruoff R.S., 2002, Mechanics of Carbon Nanotubes, Applied Mechanics Reviews 55(6): 495-533.

[3] Ajayan P.M., Stephan O., Colliex C., Trauth D., 1994, Aligned carbon nanotube arrays formed by cutting a polymer resin—nanotube composite, Science 256: 1212-1214.

[4] Lourie O., Cox D.M., Wagner H.D., 1998, Buckling and Collapse of Embedded Carbon Nanotube, Physical Review Letters 81(8): 1638-1641.

[5] Haggenmueller R., Gommans H.H., Rinzler A.G., Fischer J.E., Winey K.I., 2000, Aligned Single-Wall Carbon Nanotubes In Composites by Melt Processing Methods, Chemical Physics Letters 330: 219-225.

[6] Fidelus J.D., Wiesel E., Gojny F.H., Schulte K.,Wagner H.D., 2005, Thermo-mechanical properties of randomly oriented Carbon/epoxy nanocomposites, Composites Part A: Applied Science and Manufacturing 36: 1555-1361.

[7] Bonnet P., Sireude D., Garnier B., Chauvet O., 2007, Thermal properties and percolation in carbon nanotube–polymer composites, Journal of Applied Physics 91: 201910.

[8] Qian D., Dickey E.C., Andrews R., Rantell T., 2000, Load Transferand and Deformation Mechanisms in Carbon Nanotube-Polystyrene Composites, Applied Physics Letters 76: 2868-2870.

[9] Odegard G.M., Gates T.S., Wise K.E., Park C., Siochi E.J., 2002, Constitutive Modeling of Nanotube-Reinforced Polymer Composites, Composites Science and Technology 63(11): 1671-1687.

[10] Wuite J., Adali S., 2005, Deflection and stress behaviour of nanocomposite reinforced beams using a multiscale analysis, Composite Structures 71: 388-396.

[11] Vodenitcharova T., Zhang L.C., 2006, Bending and local buckling of a nanocomposite beam reinforced by a single-walled carbon nanotube, International Journal of Solids and Structures 43: 3006-3024.

[12] Han Y., Elliott J., 2007, Molecular dynamics simulations of the elastic properties of polymer/ carbon nanotube composites, Computation Materials Science 39: 315-323.

[13] Zhu R., Pan E., Roy A.K., 2007, Molecular dynamics study of the stress-strain behavior of carbon-nanotube reinforced Epon 862 composites, Materials Science and Engineering A 447: 51-57.

[14] Shen H.S., 2009, Nonlinear bending of functionally graded carbon nanotubereinforced composite plates in thermal environments, Composite Structures 91: 9-19.

[15] Ke L.L., Yang J., Kitipornchai S., 2010, Nonlinear free vibration of functionally graded carbon nanotube-reinforced composite beams, Composite Structures 92(3): 676-683.

[16] Wang X., 1995, Thermal shock in a hollow cylinder caused by rapid arbitrary heating, Journal of Sound and Vibration 183: 899-906.

[17] Cho H., Kardomateas G.A., Valle C.S.,1998, Elastodynamic solution for the thermal shock stresses in an orthotropic thick cylindrical shell, Journal of Applied Mechanics 65: 184-192.

[18] Ding H.J., Wang H.M., Chen W.Q., 2001, A theoretical solution of cylindrically isotropic cylindrical tube for axisymmetric plane strain dynamic thermoelastic problem, Acta Mechanica Solida Sinica 14: 357-363.

[19] Pelletier J.L., Vel S.S., 2006, An exact solution for the steady-state thermoelastic response of functionally graded orthotropic cylindrical shells, International Journal of Solidsand Structures 43: 1131-1158.

[20] Horgan C.O., Chan A.M., 1999, the pressurized hollow cylinder or disk problem for functionally graded isotropic linearly elastic materials,Journal of Elasticity55: 43-59.

[21] Tarn J.Q., 2001, Exact solutions for functionally graded anisotropic cylinders subjected to thermal and mechanical loads. International Journal of Solids and Structures 38: 8189-8206.

[22] Abd-Alla A.M., Farhan A.M., 2008, Effect of the non-homogenity on the composite infinite cylinder of orthotropic material, Physics Letters A 372: 756-260.

[23] Shi D.L., Feng X.Q., Huang Y.Y., Hwang K.C., Gao H., 2004, The effect of nanotube waviness and agglomeration on the elastic property of carbon nanotube-reinforced composites, JournalofEngineeringMaterials andTechnology 126: 250-257.

[24] Hill R., 1965, A Self- Consistent Mechanics of Composite Materials, Journalof the Mechanics andPhysicsofSolids13: 213-222.

[25] Popov V.N., Van Doren V.E., Balkanski M., 2000, Elastic Properties of Crystals of Single-Walled Carbon Nanotubes, Solid State Communications 114: 395–399.

[26] Mark J.E., 1999, Polymer Data Handbook, Oxford University Press, New York. Oxford.

[27] Hetnarski R.B., Eslami M.R., 2008, Thermal Stresses Advanced Theory and Application, Springer.