Vibration Analysis for Rectangular Plate Having a Circular Central Hole with Point Support by Rayleigh-Ritz Method
Subject Areas : Engineering
1 - Department of Mechanical Engineering, University of Kashan
2 - Department of Mechanical Engineering, University of Kashan
Keywords:
Abstract :
[1] Monahan L.J., Nemergut P.J., Maddux G.E., 1970, Natural frequencies and mode shapes of plates with interior cut-outs, The Shock and Vibration Bulletin 41:37-49.
[2] Paramasivam P., 1973, Free vibration of square plates with square opening, Journal of Sound and Vibration 30:173-178.
[3] Aksu G., Ali R., 1976, Determination of dynamic characteristics of rectangular plates with cut-outs using a finite difference formulation, Journal of Sound and Vibration 44:147-158.
[4] Rajamani A., Prabhakaran R., 1977, Dynamic response of composite plates with cut-outs, Journal of Sound and Vibration 54:549-564.
[5] Rajamani A., Prabhakaran R., 1977, Dynamic response of composite plates with cut-outs, Journal of Sound and Vibration 54:565-576.
[6] Ali R., Atwal S.J., 1980, Prediction of natural frequencies of vibration of rectangular plates with rectangular cutouts, Computers and Structures 12(9):819-823.
[7] Lam K.Y., Hung K.C, Chow S.T., 1989, Vibration analysis of plates with cut-outs by the modified rayleigh-ritz method, Applied Acoustics 28: 49-60.
[8] Lam K.Y., Hung K.C., 1990, Vibration study on plates with stiffened openings using orthogonal polynomials and partitioning method, Computers and Structures 37:295-301.
[9] Laura P.A., Romanelli E., Rossi R.E., 1997, Transverse vibrations of simply-supported rectangular plates with rectangular cutouts, Journal of Sound and Vibration 202(2):275-283.
[10] Sakiyama T., Huang M., Matsuda H., Morita C., 2003, Free vibration of orthotropic square plates with a square hole, Journal of Sound and Vibration 259(1):63-80.
[11] Joga-Rao C.V., Pickett G., 1961, Vibrations of plates of irregular shapes and plates with holes, Journal of the Aeronautical Society of India 13(3):83-88.
[12] Kumai T., 1952, The flexural vibrations of a square plate with a central circular hole, Proceedings of 2nd Japan National Congress on Applied Mechanics 339-342.
[13] Hegarty R.F., Ariman T., 1975, Elasto-dynamic analysis of rectangular plates with circular holes, International Journal of Solids and Structures 11:895-906.
[14] Eastep F.E., Hemmig F.G., 1978, Estimation of fundamental frequency of non-circular plates with free,circular cutouts, Journal of Sound and Vibration 56(2):155-165.
[15] Nagaya K., 1952, Transverse vibration of a plate having an eccentric inner boundary, Journal of Applied Mechanics 18 (3):1031-1036.
[16] Nagaya K., 1980, Transverse vibration of a rectangular plate with an eccentric circular inner boundary, International Journal of Solids and Structures 16:1007-1016.
[17] Lee H.S., Kim K.C., 1984, Transverse vibration of rectangular plates having an inner cutout in water, Journal of the Society of Naval Architects of Korea 21(1):21-34.
[18] Kim K.C., Han S.Y., Jung J.H., 1987, Transverse vibration of stiffened rectangular plates having an inner cutout. Journal of the Society of Naval Architects of Korea 24(3):35-42.
[19] Avalos D.R., Laura P.A., , Transverse vibrations of simply supported rectangular plates with two rectangular cutouts, Journal of Sound and Vibration 267:967-977.
[20] Lee H.S., Kim K.C., 1984, Transverse vibration of rectangular plates having an inner cutout in water, Journal of the Society of Naval Architects of Korea 21(1):21-34.
[21] Khurasia H.B., Rawtani S., 1978, Vibration analysis of circular plates with eccentric hole, Journal of Applied Mechanics 45(1):215-217.
[22] Lin W.H., 1982, Free transverse vibrations of uniform circular plates and membranes with eccentric holes, Journal of Sound and Vibration 81(3): 425-433.
[23] Laura P.A., Masia U., Avalos D.R.,2006, Small amplitude, transverse vibrations of circular plates elastically restrained against rotation with an eccentric circular perforation with a free edge, Journal of Sound and Vibration 292:1004-1010.
[24] Cheng L., Li Y.Y., Yam L.H., 2003, Vibration analysis of annular-like plates, Journal of Sound and Vibration 262: 1153-1170.
[25] Lee W.M., Chen J.T, Lee Y.T.,2007, Free vibration analysis of circular plates with multiple circular holes using indirect BIEMs, Journal of Sound and Vibration 304:811-830.
[26] Zhong H., Yu T., 2007, Flexural vibration analysis of an eccentric annular mindlin plate, Archive of Applied Mechanics 77:185-195.
[27] Wang D., Yang Z.C., Yu Z.G.,2010, Minimum stiffness location of point support for control of fundamental natural frequency of rectangular plate by Rayleigh–Ritz method, Journal of Sound and Vibration 329:2792-2808.
[28] Joseph Watkins R., Barton Jr O., 2010, Characterizing the vibration of an elastically point supported rectangular plate using eigensensitivity analysis, Thin-Walled Structures 48:327-333.
[29] Dozio L., 2011, On the use of the trigonometric ritz method for general vibration analysis of rectangular kirchhoff plates, Thin-Walled Structures 49:129-144.
[30] Kwak M.K., Han S.,2007, Free vibration analysis of rectangular plate with a hole by means of independent coordinate coupling method, Journal of Sound and Vibration 306:12-30.
[31] Saeedi K., Leo A., 2012, Vibration of circular plate with multiple eccentric circular perforations by the Rayleigh-Ritz method, Journal of Mechanical Science and Technology 26 (5):1439-1448.
[32] Fan S.C., Cheung Y.K., 1984, Flexural free vibrations of rectangular plates with complex support conditions, Journal of Sound and Vibration 93:81-94.
[33] Utjes J.C., Laura P.A., 1984, Vibrations of thin elastic plates with point supports: a comparative study, Second National Meeting of Users of the Method of Finite Elements.
[34] Wang D., Jiang J.S., Zhang W.H., 2004, Optimization of support positions to maximize the fundamental frequency of structures, International Journal for Numerical Methods in Engineering 61:1584-1602.
