ANSYS Modeling for Bone Reconstruction by Using Hybrid Nano Bio Composite

Subject Areas : Mechanical Engineering

J Sattar Kashan ¹ , S Mahmood Ali ²

1 - Biomedical Engineering Department, University of Technology, Baghdad, Iraq
2 - Biomedical Engineering Department, University of Technology, Baghdad, Iraq

Received: 2020-07-07 Accepted : 2020-09-12 Published : 2020-12-30

Keywords:

References:

[1] Zagane M.E., Benbarek S., Sahli A., Bachir B., Serier B., 2016, Numerical simulation of the femur fracture under static loading, Structural Engineering and Mechanics 60(3): 405-412.
[2] Pedro H.C., Kestur G., Fernando W., 2009, Nanocomposites: synthesis, structure, properties and new application opportunities, Materials Research 12(1): 1-39.
[3] Luca C., Fulvia T., Massimiliano B., Fabio B., Susanna S., Marco V., 2008, Multiscale investigation of the functional properties of the human femur, Philosophical Transactions of the Royal Society A 366: 3319-3341.
[4] Abdel-Wahab A.A., Maligno A.R., Silberschmidt V.V., 2012, Micro-scale modelling of bovine cortical bone fracture: analysis of crack propagation and microstructure using X-FEM, Computational Materials Science 52(1): 128-135.
[5] Adeel A., 2014, Implantable zirconia bioceramics for bone repair and replacement: A chronological review, Materials Express 4(1): 1-12.
[6] Jenan S.K., Huseein G., 2017, The development of biomimetic nano CaCO3/ PPBio composites as bone repair materials- optimal thermal properties evaluation, Journal of Babylon University, Engineering Sciences 25(5): 1562-1571.
[7] Toktam G., Azadeh S., Mohammad H.E., Alireza M., Jebraeel M., Ali M., 2018, Current concepts in scaffolding for bone tissue engineering, The Archives of Bone and Joint Surgery 6(2): 90-99.
[8] Sergey V.D., 2011, Biocomposites and hybrid biomaterials based on calcium orthophosphates, Biomatter 1(1): 3-56.
[9] Mohamed T., Emmanuel R., Patrick C., Christian H., Martine P., Sylvie W.M., 2008, Numerical modeling of an osteoporotic femur: comparison before and after total hip prosthesis implantation, European Journal of Computational Mechanics 17(5,6,7): 785-793.
[10] Nackenhorst U., 1997, Numerical simulation of stress stimulated bone remodeling, Technische Mechanik 7(1): 31-40.
[11] Abdul Kaleel S.H., Bahuleyan B. Ko., Masihullah J., Mamdouh A., 2011, Thermal and mechanical properties of polyethylene/doped-TiO2 nanocomposites synthesized using in situ polymerization, Journal of Nanomaterials 964353: 1-6.
[12] Rajkamal B., Sivakumar S., Naveen N., 2014, Bioceramic nanofibres by electrospinning, Fibers 2: 221-239.
[13] Wen S., Mohammad S.M., Hui Z., Jesse Z., Hiran P., 2012, MTA-enriched nanocomposite TiO2-polymeric powder coatings support human mesenchymal cell attachment and growth, Biomedical Materials 7: 1-12.
[14] Lennon A.B., Prendergast P.J., 2002, Residual stress due to curing can initiate damage in porous bone cement: experimental and theoretical evidence, Journal of Biomechanics 35: 311-321.
[15] Abdel-Hamid I.M., Mohammad S.M., Anusha M., Hifsa P., Uma M.K., 2017, On the injection molding processing parameters of HDPE-TiO2 nanocomposites, Materials 10(85): 1-25.
[16] Shariati M., Hatami H., Eipakchi H. R., Yarahmadi H., Torabi H., 2011, Experimental and numerical investigations on softening behavior of POM under cyclic strain-controlled loading, Polymer-Plastics Technology and Engineering 50(15): 1576-1582.
[17] Hatami H., Hosseini M., Yasuri A. K., 2019, Perforation of thin aluminum targets under hypervelocity impact of aluminum spherical projectiles, Materials Evaluation 77(3): 411-422.
[18] Rad M.S., Hatami H., Alipouri R., Nejad A.F., Omidinasab F., 2019, Determination of energy absorption in different cellular auxetic structures, Mechanics & Industry 20(3): 1-11.
[19] Rad M.S., Hatami H., Ahmad Z., Yasuri A.K., 2019, Analytical solution and finite element approach to the dense re-entrant unit cells of auxetic structures, Acta Mechanica 230: 2171-2185.
[20] Hatami H., Shariati M., 2019, Numerical and experimental investigation of SS304L cylindrical shell with cutout under uniaxial cyclic loading, Iranian Journal of Science and Technology, Transactions of Mechanical Engineering 43:139-153.
[21] Ahmet C.C., Vahdet U., Recep K., 2007, Three-dimensional anatomic finite element modelling of hemi-arthroplasty of human hip joint, Trends in Biomaterials and Artificial Organs 21(1): 63-72.
[22] Senthil Maharaja P.S.R., Maheswaranb R., Vasanthanathan A., 2013, Numerical analysis of fractured femur bone with prosthetic bone plates, Procedia Engineering 64: 1242-1251.
[23] Dmitry I., Yuri B., Anatoly B., 2016, A numerical comparative analysis of ChM and Fixion nails for diaphyseal femur fractures, Acta of Bioengineering and Biomechanics 18(3): 73-81.
[24] Srimongkol S., Rattanamongkonkul S., Pakapongpun A., Poltem D., 2012, Mathematical modeling for stress distribution in total hip arthroplasty, International Journal of Mathematical Models and methods in Applied Sciences 6(7): 885-892.
[25] Aleksa M., Aleksandar S., Katarina C., Uros T., Branislav D., 2017, Numerical analysis of stress distribution in total hip replacement implant, Integritet I Vek Konstrukcija 17(2): 139-144.
[26] Sajad A.K., 2013, The fatigue design of a bone preserving hip implant with functionally graded cellular material, Damiano Pasini Journal of Medical Devices 7: 1-2.
[27] Jenan S.K., 2014, Preparation and Characterization of Hydroxyapatite/ Yttria Partially Stabilized Zirconia Polymeric Biocomposite, PhD. Thesis, Department of Production Engineering and Metallurgy- University of Technology, Baghdad, Iraq.
[28] Amin D.T., Jafar T.A., Jenan S.K., 2014, Effect of particle size on the physical and mechanical properties of nano HA/HDPE bio-composite for synthetic bone substitute, Engineering and Technology Journal 32(2): 286-297.
[29] Kashan J.S., Rija N.H., Abbas T.A., 2017, Modified polymer matrix nano biocomposite for bone repair and replacement- radiological study, Engineering and Technology Journal 35(2): 365-371.
[30] Lennert R., Dennis J., Adam B., Nico V., 2017, The mechanical response of a polyetheretherketone femoral knee implant under a deep squatting loading condition, Proceedings of the Institution of Mechanical Engineers, Part H ,Journal Engineering in Medicine 231(12): 1204-1212.
[31] Dhabale R., Jatti V.S., 2016, A bio-material: mechanical behaviour of LDPE-Al2O3-TiO2, Materials Science and Engineering 149: 1-10.
[32] Khor F., Cronin D.S., Watson B., Gierczycka D., Malcolm S., 2018, Importance of asymmetry and anisotropy in predicting cortical bone response and fracture using human body model femur in three-point bending and axial rotation, Journal of the Mechanical Behavior of Biomedical Materials 87: 213-229.
[33] Bartosz N., Jerzy N., 2006, Numerical simulation of influence of chosen parameters on tensile stresses in bone cement layer in total hip arthoplastry, Advanced in Materials Science E 6(2): 9-17.