A Novel Method for Numerical Analysis of 3D Nonlinear Thermo-Mechanical Bending of Annular and Circular Plates with Asymmetric Boundary Conditions Using SAPM

Subject Areas : Mechanical Engineering

A. R Golkarian ¹ , M Jabbarzadeh ² , Sh Dastjerdi ³

1 - Department of Mechanical Engineering, Science & Research Branch, Islamic Azad University, Tehran, Iran
2 - Department of Mechanical Engineering, Mashhad Branch, Islamic Azad University, Mashhad, Iran
3 - Department of Mechanical Engineering, Shahrood Branch, Islamic Azad University, Shahrood, Iran

Received: 2019-03-30 Accepted : 2019-05-26 Published : 2019-09-30

Keywords:

References:

[1] Kirchhoff G., 1850, Über das Gleichgwich und die Bewegung einer elastischen Scheibe, Journal für die Reine und Angewandte Mathematik 40: 51-88.
[2] Tsiatas G.C., 2009, A new Kirchhoff plate model based on a modified couple stress theory, International Journal of Solids and Structures 46(13): 2757-2564.
[3] Mindlin R.D., 1951, Influence of rotatory inertia and shear on flexural motions of isotropic, elastic plates, ASME Journal of Applied Mechanics 18: 31-38.
[4] Reissner E., 1945, The effect of transverse shear deformation on the bending of elastic plates, ASME Journal of Applied Mechanics 12: 68-77.
[5] Lou J., He L., Du J., 2015, A unified higher order plate theory for functionally graded microplates based on the modified couple stress theory, Composite Structures 133: 1036-1047.
[6] Reddy J.N., 1984, A simple higher-order theory for laminated composite plates, Journal of Applied Mechanics 51(4): 745-752.
[7] Touratier M., 1991, An efficient standard plate theory, International Journal of Engineering Science 29(8): 901-916.
[8] Soldatos K., 1992, A transverse shear deformation theory for homogeneous monoclinic plates, Acta Mechanica 94 (3): 195-220.
[9] Ferreira A.J.M., Roque C.M.C., Jorge R.M.N., 2005, Analysis of composite plates by trigonometric shear deformation theory and multiquadrics, Computers & Structures 83(27): 2225-2237.
[10] Karama M., Afaq K.S., Mistou S., 2003, Mechanical behavior of laminated composite beam by the new multi-layered laminated composite structures model with transverse shear stress continuity, International Journal of Solids and Structures 40(6): 1525-1546.
[11] Thai H-T., Vo T.P., 2013, A size-dependent functionally graded sinusoidal plate model based on a modified couple stress theory, Composite Structures 96: 376-383.
[12] Reddy J.N., Berry J., 2012, Nonlinear theories of axisymmetric bending of functionally graded circular plates with modified couple stress, Computers & Structures 94(12): 3664-3668.
[13] Reddy J.N., Romanoff J., Loya J.A., 2016, Nonlinear finite element analysis of functionally graded circular plates with modified couple stress theory, European Journal of Mechanics -A/Solids 56: 92-104.
[14] Dastjerdi S., Jabbarzadeh M., 2016, Nonlocal bending analysis of bilayer annular/circular nano plates based on first order shear deformation theory, Journal of Solid Mechanics 8: 645-661.
[15] Dastjerdi S., Jabbarzadeh M., 2016, Non-local thermo-elastic buckling analysis of multi- layer annular/circular nano-plates based on first and third order shear deformation theories using DQ method, Journal of Solid Mechanics 8: 859-874.
[16] Dastjerdi S., Abbasi M., Yazdanparast L., 2017, A new modified higher-order shear deformation theory for nonlinear analysis of macro- and nano-annular sector plates using the extended Kantorovich method in conjunction with SAPM, Acta Mechanica 228(10): 3381-3401.
[17] Yang B., Kitipornchai S., Yang Y.F., Yang J., 2017, 3D Thermo-mechanical bending solution of functionally graded graphene reinforced circular and annular plates, Applied Mathematical Modelling 49: 69-86.
[18] Tielking J.T., 1979, Asymmetric bending of annular plated, International Journal of Solids and Structures 16: 361-373.
[19] Pardoen G.C., 1975, Asymmetric bending of circular plates using the finite element method, Computers & Structures 5: 197-202.
[20] Al Jarbouh A., 2015, Mechanical modelling for the behavior of the metallic plate under the effect of bending loads, Energy Procedia 74: 1119-1132.
[21] Timoshenko S., Woinowsky-Krieger S., 1959, Theories of Plates and Shells, New York, McGraw-Book Company.
[22] Damkilde L.,Continuum Materials, Aalborg Universitet Esbjerg, IOP Publishing Homes Civil.
[23] Dastjerdi S., Jabbarzadeh M., 2017, Non-linear bending analysis of multi-layer orthotropic annular/circular graphene sheets embedded in elastic matrix in thermal environment based on non-local elasticity theory, Applied Mathematical Modelling 41: 83-101.
[24] Altekin M., Yu¨ kseler R.F., 2011,Proceedings of the World Congress on Engineering, London, U.K.
[25] Szilard R., 1974, Theory and Analysis of Plates, Engle wood Cliffs, Prentice-Hall Inc.
[26] Reddy J.N., Wang C.M., Kitipornchai S., 1999, Axisymmetric bending of functionally grade circular and annular plates, European Journal of Mechanics -A/Solids 18: 185-199.
[27] Golmakani M.E., 2013, Non-linear bending analysis of ring-stiffened functionally graded circular plates under mechanical and thermal loadings, International Journal of Mechanical Sciences 79: 130-142.
[28] Reddy J.N., Romanoff J., Loya J.A., 2016, Nonlinear finite element analysis of functionally graded circular plates with modified couple stress theory, European Journal of Mechanics -A/Solids 56: 92-104.
[29] Hosseini Kordkheili S.A., Moshrefzadeh-Sani H., 2013, Mechanical properties of double-layered graphene sheets, Computational Materials Science 69: 335-343.