Strain Hardening Analysis for M-P Interaction in Metallic Beam of T-Section

Subject Areas : Engineering

M  Hosseini ¹ (Department of Civil Engineering, Faculty of Engineering, Lorestan University, Iran)
H  Hatami ² (Department of Mechanical Engineering , Faculty of Engineering, Lorestan University, Iran)

Received: 2019-03-08 Accepted : 2019-05-08 Published : 2019-06-30

Keywords:

References:

[1] Menkes S.B., Opat H.J., 1973, Broken beams, Experimental Mechanics 13: 480-486.
[2] Jones N., 1976, Plastic failure of ductile beams loaded dynamically, Journal of Engineering for Industry 98: 131-136.
[3] Liu J.H., Jones N., 1987, Experimental investigation of clamped beams struck transversely by a mass, International Journal of Impact Engineering 6(4): 303-335.
[4] Liu J.H., Jones N., 1988, Plastic Failure of a Clamped Beams Struck Transversely by a Mass, University of Liverpool, Department of Mechanical Engineering Report ES/13/87.
[5] Jones N., Soares C.G., 1977, Higher model dynamic, plastic behavior of beam loaded impulsively, International Journal of Mechanical Sciences 20: 135-147.
[6] Shen W.Q., Jones N. A., 1992, Failure criterion for beams under impulsive loading, International Journal of Impact Engineering 12(1): 101-121.
[7] Alves M., Jones N., 2002, Impact failure of beams using damage mechanics: Part II – Application, International Journal of Impact Engineering 27(8): 863-90.
[8] Symonds P.S., Genna F., Ciullini A., 1991, Special cases in study of anomalous dynamic elastic-plastic response of beams by a simple model, International Journal of Solids and Structures 27(3): 299-314.
[9] Qian Y., Symonds P.S., 1996, Anomalous dynamic elastic-plastic response of a Galerkin beam model, International Journal of Mechanical Sciences 38(7): 687-708.
[10] Bassi A., Genna F., Symonds P.S., 2003, Anomalous elastic-plastic responses to short pulse loading of circular plates, International Journal of Impact Engineering 28(1): 65-91.
[11] Lellep J., Torn K., 2005, Shear and bending response of a rigid-plastic beam subjected to impulsive loading, International Journal of Impact Engineering 31(9): 1081-1105.
[12] Ma G. W., Shi H. J., Shu D. W., 2007, P–I diagram method for combined failure modes of rigid-plastic beams, International Journal of Impact Engineering 34(6): 1081-1094.
[13] Ghaderi S. H., Kazuyuki H., Masahiro F., 2009, Analysis of stationary deformation behavior of a semi-infinite rigid-perfect plastic beam subjected to moving distributed loads of finite width, International Journal of Impact Engineering 36(1): 115-121.
[14] Li Q. M., Liu Y. M., 2003, Uncertain dynamic response of a deterministic elastic–plastic beam, International Journal of Impact Engineering 28(6): 643-651.
[15] Li Q. M., Liu Y. M., Ma G. W., 2006, The anomalous region of elastic–plastic beam dynamics, International Journal of Impact Engineering 32(9): 1357-1369.
[16] Xi F., Liu F., Li Q. M., 2012, Large deflection response of an elastic, perfectly plastic cantilever beam subjected to a step loading, International Journal of Impact Engineering 48: 33-45.
[17] Brake M. R., 2012, An analytical elastic-perfectly plastic contact model, International Journal of Solids and Structures 49(22): 3129-3141.
[18] Hosseini M., Abbas H., 2013, Strain hardening in M–P interaction for metallic beam of I-section, Thin-Walled Structures 62: 243-256.
[19] Alves M., Jones N., 2002, Impact failure of beams using damage mechanics, Part I – Analytical model, International Journal of Impact Engineering 27(8): 837-61.