Isogeometric Analysis for Topology Optimisation of Two Dimensional Planar and Laminated Composite Plate Continuum Structures

Subject Areas : Computational Mechanics

K.N.V  Chandrasekhar ¹ (Department of Civil Engineering, CVR College of Engineering, Hyderabad, Telangana, India)
V  Bhikshma ² (University College of Engineering, Osmania University, Hyderabad, Telangana, India)
N  Rakesh ³ (Department of Civil Engineering, CVR College of Engineering, Hyderabad, Telangana, India)
N  Swapnareddy ⁴ (Department of Civil Engineering, CVR College of Engineering, Hyderabad, Telangana, India)
C  Rakesh ⁵ (Department of Civil Engineering, CVR College of Engineering, Hyderabad, Telangana, India)

Received: 2021-03-13 Accepted : 2021-05-10 Published : 2021-06-30

Keywords:

References:

[1] Punmia B.C., Designs R.C.C., 2006, Laxmi Publications, ISBN: 9788131809426.
[2] Liang Q.Q., 1999, Topology optimisation of strut-and-tie models in non-flexural reinforced concrete members, International Conference on Mechanics of Structures, Materials and Systems, Wollongong, Australia.
[3] Leu L.-J., 2006, Strut and tie methodology for three dimensional reinforced concrete structures, Journal of Structural Engineering 132(6): 929-938.
[4] Michelle A.G.M., 1904, LVIII the limits of economy of material in frame-structures, Philosophical Magazine 8(47): 589-597.
[5] Khajehzadeh M., 2011, Modified particle swarm optimization for optimum design of spread footing and retaining wall, Journal of Zhejiang University-Science A 12(6): 415-427.
[6] James B., 2005, A Finite Element Approach to Reinforced Concrete Slab Design, Master of Science Thesis, Georgia Institute of Technology.
[7] Kwak H.G., Filippou F.C., 1992, Finite element analysis of reinforced concrete structures under monotonic and cyclic loads, Earthquake Engineering, Tenth World Conference, Rotterdam.
[8] Kaveh A., Behnam A.F., 2013, Design optimisation of reinforced concrete 3D structures considering frequency constraints via., a charged system search, Scientia Iranica A 20(3): 387-396.
[9] Kim H., Baker G., 2011, Topology Optimisation of Reinforced Concrete Structures, School of Engineering, University of Warwick.
[10] Oded A., 2013, A topology optimisation procedure for reinforced concrete structures, Computers & Structures 114-115: 46-85.
[11] Oded A., Michael B., 2010, Topology optimisation for conceptual design of reinforced concrete structures, 9th World Congress on Structural and Multidisciplinary Optimization, Shizuoka, Japan.
[12] Oded A., Ole S., 2013, Reinforcement layout design for concrete structures based on continuum damage and truss topology optimisation, Structural and Multidisciplinary Optimization 47: 157-174.
[13] Liang Q.Q., 2000, Topology optimisation of strut-and-tie models in reinforced concrete structures using an evolutionary procedure, ACI Structural Journal 97: 322-332.
[14] Sarma K., Adeli H., 1998, Cost optimisation of concrete structures, Journal of Structural Engineering 124(5): 570-578.
[15] Babiker S., 2012, Design optimisation of reinforced concrete beams using artificial neural network, International Journal of Engineering Inventions 1(8): 07-13.
[16] Guerra A., Kiousis P.D., 2006, Design optimisation of reinforced concrete structures, Computers and Concrete 3(5): 313-334.
[17] Singh B., Rai H.S., 2014, Optimisation of rcc beam, International Journal of Engineering, Business and Enterprise Applications 14: 21-34.
[18] Kaveh A., Sabzi O., 2012, Optimal design of reinforced concrete frames using big bang-big crunch algorithm, International Journal of Civil Engineering, Structural Engineering 10(3): 189-200.
[19] Yousif S.T., 2013, Optimum cost design of reinforced concrete continuous beams using genetic algorithms, International Journal of Applied Sciences and Engineering Research 12(4): 681-693.
[20] McCarthy T.J., McCluskey S., 2009, A particle swarm optimisation approach to reinforced concrete beam design according to AS360, Proceedings on the First International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Civil-Comp Press, Stirlingshire, UK.
[21] Karthiga N., 2014, Finite element analysis of reinforced concrete beams, International Journal of Innovative research in Advanced Engineering 1(8): 272-285.
[22] Chandrasekhar K.N.V., Sahithi N.S.S., 2018, A step by step illustrative procedure to perform isogeometric analysis and find the nodal displacements for a two dimensional plate structure, i-Managers Journal on Structural Engineering 6: 40-52.
[23] Chandrasekhar K.N.V., Sahithi N.S.S., 2018, A step by step procedure to perform isogeometric analysis of beam and bar problems in civil engineering including sizing optimisation of a beam, i-Managers Journal on Structural Engineering 7: 13-27.
[24] Sahithi N.S.S., Chandrasekhar K.N.V., 2019, Isogeometric topology optimisation of continuum structures using evolutionary algorithms, Journal of Applied Computational Mechanics 5: 414-440.
[25] Sairam K.S., Sinha P.K., 1991, Hygrothermal effects on the bending characteristics of laminated composite plates, Computers & Structures 40(4): 1009-1015.
[26] Kant T., Swaminathan K., 2001, Analytical solutions for free vibration of laminated composite and sandwich plates based on a higher-order refined theory, Composite Structures 53: 73-85.
[27] Hughes T.J.R., 2010, Efficient quadrature for NURBS-based isogeometric analysis, Computer Methods in Applied Mechanical and Engineering 199: 301-313.
[28] Hassani B., 2012, An isogeomtrical approach to structural topology optimisation by optimality criteria, Structural and Multidisciplinary Optimization 45: 223-233.
[29] Benson D.J., 2011, A large deformation, rotation-free, isogeometric shell, Computer Methods in Applied Mechanical and Engineering 200: 1367-1378.
[30] Hoang X., Nguyena E.A., Nguyen-Xuan H., Thuc P.V., 2017, Geometrically nonlinear isogeometric analysis of functionally graded microplates with the modified couple stress theory, Computers and Structures 193: 110-127.
[31] Dufour J.-E., 2018, A cost-effective isogeometric approach for composite plates based on a stress recovery procedure, Composites Part B 138: 12-18.
[32] Valizadeh N., 2013, NURBS-based finite element analysis of functionally graded plates: Static bending, vibration, buckling and flutter, Composite Structures 99: 309-326.
[33] Wang X., 2015, Isogeometric finite element method for buckling analysis of generally laminated composite beams with different boundary conditions, International Journal of Mechanical Sciences 104: 190-199.
[34] Somireddy M., Rajagopal A., 2014, Meshless natural neighbor Galerkin method for the bending and vibration analysis of composite plates, Composite Structures 111: 138-146.
[35] Weeger O., 2014, Nonlinear frequency response analysis of structural vibrations, Computational Mechanics 54: 1477-1495.
[36] Patton A., 2019, Fast and accurate elastic analysis of laminated composite plates via. isogeometric collocation and an equilibrium-based stress recovery approach, Composite Structures 225: 111026.
[37] Shojaee S., 2012, Free vibration and buckling analysis of laminated composite plates using the NURBS-based isogeometric finite element method, Composite Structures 94: 1677-1693.
[38] Behshad A., Ghasemi M.R., 2014, NURBS-IGA modelling: analysis and optimisation of laminated plates, Tehnicki Vjesnik 21(4): 789-797.
[39] Hong Ch., 2013, A rotation-free isogeometric analysis for composite sandwich thin plates, International Journal of Composite Materials 3(6A): 10-18.
[40] Farshad R., Roger S., 2016, Isogeometric nonlinear shell elements for thin laminated composites based on analytical thickness integration, Journal of Micromechanics and Molecular Physics 01(03-04): 1640010.
[41] Shuang Q., 2018, Multilevel optimisation of laminated composite thin-walled structures using isogeometric analysis, 13th World Congress on Computational Mechanics (WCCM XIII), New York, NY, USA.
[42] Kapoor H., 2013, Isogeometric Finite Element Code Development for Analysis of Laminated Composite Structures, Ph.D. Thesis, Virginia Institute.
[43] Gupta A., Ghosh A., 2019, NURBS-based thermo-elastic analyses of laminated and sandwich composite plates, Sådhanå 44: 84.
[44] Cassanova C.F., 2014, Analysis of Composite Shells: Isogeometric Modelling and Damage Identification, Ph.D. Thesis, Universidad de Granada.
[45] Kiendl J.M., 2011, Isogeometric Analysis and Shape Optimal Design of Shell Structures, Ph.D. Thesis, Technische Universität München.
[46] Tran L.V., 2013, An isogeometric finite element formulation for thermal buckling analysis of functionally graded plates, Finite Element Analysis and Design 70: 65-76.
[47] Tran L.V., 2013, Isogeometric Analysis for Functionally Graded Plates Using Higher Order Shear Deformation Theory, Universiteit Gent.
[48] Breitenberger M., 2013, Isogeometric layout optimisation of shell structures using trimmed NURBS surfaces, 10th World Congress on Structural Multidisciplinary Optimisation, Orlando, USA.
[49] Deng X., 2015, Isogeometric analysis of continuum damage in rotation-free composite shells, Computer Methods in Applied Mechanical and Engineering 284: 349-372.
[50] Kiani Y., 2018, NURBS-based isogeometric thermal postbuckling analysis of temperature dependent graphene reinforced composite laminated plates, Thin-Walled Structures 125: 211-219.
[51] PavanG.S., Nanjunda Rao K.S., 2016, Analysis of laminated composite plates using isogeometric collocation method, Eccomas Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete Island, Greece.
[52] Liu H., 2018, Isogeometric analysis based topology optimization design with global stress constraint, Computer Methods in Applied Mechanical and Engineering 342: 625-652.
[53] Civalek O., Yavas A., 2006, Large deflection static analysis of rectuangular plates on two parameter elastic foundations, International Journal of Science & Technology 1(1): 43-50.
[54] Civalek O., Kiracioglu O., 2010, Free vibration analysis of Timoshenko beams by DSC method, International Journal for Numerical Methods in Biomedical Engineering 26: 1890-1898.
[55] Akgöz B., Civalek O., 2017, A size-dependent beam model for stability of axially loaded carbon nanotubes surrounded by Pasternak elastic foundation, Composite Structures 176: 1028-1038.
[56] Wu H., Yang J., Kitipornchai S., 2017, Parametric instability of Thermo-mechanically loaded functionally graded graphene reinforced nanocomposite plates, International Journal of Mechanical Sciences 135: 431-440.
[57] Shen H-S., Xiang Y., Fan Y., Hui D., 2017, Nonlinear vibration of functionally graded graphene-reinforced composite laminated cylindrical panels resting on elastic foundations in thermal environments, Composites Part B 136: 177-186.
[58] Hsu M.H., Hsu Y.L., 2005, Generalization of two- And three-dimensional structural topology optimization, Engineering Optimization 37: 83-102.
[59] Hughes T.J.R., 2005, Isogeometric analysis: CAD, finite elements, NURBS, exact geometry and mesh refinement, Computer Methods in Applied Mechanical and Engineering 194: 4135-4195.
[60] Liang Q.Q., 2002, Performance based optimisation for strut-and-tie modeling of concrete, Journal of Structural Engineering 128(6): 815.
[61] Behshad A., Ghasemi M.R., 2013, Isogeometric based modelling and analysis of laminated composite plates under transverse loading, Journal of Solid Mechanics 5(4): 380-390.
[62] Hong Ch., Pierre S., Bordas A., 2014, Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory, European Journal of Mechanics / A solids 43: 89-108.
[63] Serdyuk D., 2012, Fundamentals of Optimization Problems, FAU Erlangen-Nürnberg, TU München, Uni Stuttgart.
[64] Tang P-S., Chang K-H., 2001, Integration of topology and shape optimisation for design of structural components, Structural and Multidisciplinary Optimization 22: 65-82.
[65] Chirehdast M., Gea H.Ch., 1992, Further advances in the integrated structural optimisation system, American Institute of Aeronautics and Astronautics 4817: 974-981.
[66] Hassani B., 2012, An isogeometrial approach to structural topology optimisation by optimality criteria, Structural and Multidisciplinary Optimization 45: 223-233.
[67] Hong Ch., Nguyen-Xuan H., Bordas S.P.A., Nguyen-Thanh N., Rabczuk T., 2015, Isogeometric analysis of laminated composite plates using the higher-order shear deformation theory, Mechanics of Advanced Materials and Structures 22: 451-469.
[68] Liang Q.Q., 2007, Performance-based optimisation: A Review, Advances in Structural Engineering 109(6): 739-753.
[69] Austin J., Thomas C., Hughes J.R., Bazilevs Y., 2009, Isogeometric Analysis Toward Integration of CAD and FEA, John Wiley & Sons.
[70] Hervandil M., Anna S., Fonseca J.S.O., 2002, Topology optimisation of continuum two-dimensional structures under compliance and stress constraints, Mecanica Computacional XXI: 2732-2751.
[71] Abolbashari M.H., Keshavarzmanesh Sh., 2006, On various aspects of application of the evolutionary optimisation method for 2D and 3D continuum structures, Finite Elements in Analysis and Design 42: 478-491.
[72] Yang X.Y., Xie Y.M., Steven G.P., 2005, Evolutionary methods for topology optimisation of continuous structures with design dependent loads, Computers & Structures 83: 956-963.
[73] Kant T., Swaminathan K., 2002, Analytical solutions for the static analysis of laminated composite and sandwich plates based on a higher order refined theory, Composite Structures 56: 329-344.