An Axisymmetric Torsion Problem of an Elastic Layer on a Rigid Circular Base

Subject Areas : Engineering

B Kebli ¹ , S Berkane ² , F Guerrache ³

1 - Laboratoire de Génie Mécanique et Développement, Département de Génie Mécanique, Ecole Nationale Polytechnique El-Harrach Algiers 16200, Algeria
2 - Department of Computer Science and Engineering, University of Québec in Outaouais, Gatineau, Québec, Canada
3 - Laboratoire de Génie Mécanique et Développement, Département de Génie Mécanique, Ecole Nationale Polytechnique El-Harrach Algiers 16200, Algeria

Received: 2019-12-15 Accepted : 2020-02-20 Published : 2020-03-01

Keywords:

References:

[1] Reissner E., Sagoci H.F., 1944, Forced torsion oscillation of an half-space-I, Journal of Applied Physics 15: 652-654.
[2] Lebedev N.N., Ufliand I.S., 1958, Axisymmetric contact problem for an elastic layer, PMM 22: 320-326.
[3] Florence A.L., 1961, Two contact problems for an elastic layer, The Quarterly Journal of Mechanics and Applied Mathematics 14: 453-459.
[4] Smelyanskaya L.M., Tokar A.S., 1971, Strength of a composite elastic layer weakened by a plane circular crack, Soviet Applied Mechanics 7: 1119-1125.
[5] Low R.D., 1972, On the torsion of elastic half spaces with embedded penny shaped flaws, Journal of Applied Mechanics 72: 786-790.
[6] Sih G.C., Chen E.P., 1972, Torsion of a laminar composite de bonded over a penny- shaped area, Journal of the Franklin Institute 293: 251-261.
[7] Dhawan G.K., 1974, Torsion of elastic half-space with penny shaped crack, Defence Science Journal 24: 15-22.
[8] Tamate O., Saito T., 1975,On the twisting of two elastic layers bonded to a rigid foundation, Translations of the Japan Society of Mechanical Engineers 341: 33-40.
[9] Singh B.M., Dhaliwal R.S., 1977, Torsion of a elastic layer by two circular dies, International Journal of Engineering Science 15: 171-175.
[10] Gazetas G., 1981, Torsional displacements and stresses in non-homogeneous soil, Geotechnique 31: 487-496.
[11] Hara T., Akiyama T., Shibuya T., Koizumi T., 1989, An axisymmetric torsion problem of an elastic layer on a rigid foundation with a cylindrical hole, Translations of the Japan Society of Mechanical Engineers 55: 1339-1346 .
[12] Erguven M.E., 1991, Torsion of two bonded layers by a rigid disc, Meccanica 26: 117-123.
[13] Pak R.Y.S., Saphores J.D.M., 1991, Torsion of a rigid disc in a half-space, International Journal of Engineering Science 29: 1-12 .
[14] Bacci A., Bennati S., 1996, An approximate explicit solution for the local torsion of an elastic layer, Mechanics of Structures and Machines 24: 21-38.
[15] Li C., Zou Z., 1998, Local stress field for torsion of penny-shaped crack in a functionally graded material, International Journal of Fracture 91: 17-22.
[16] Sakamoto M., 2003, An elastic layer with a penny-shaped crack subjected to internal pressure, SME International Journal Series A solid Mechanics and Material Engineering 46: 10-14.
[17] Matysiak S.J., Kulchytsky-Zhyhailo R., Perkowski D.M., 2011, Reissner-Sagoci problem for a homogeneous coating on a functionally graded half-space, Mechanics Research Communications 38: 320-325.
[18] Madani F., Kebli B., 2017, Axisymmetric torsion of an internally cracked elastic medium by two embedded rigid discs, Mechanics and Mechanical Engineering 21: 363-377.
[19] Duffy D.G., 2008, Mixed Boundary Value Problems, Boca Raton, Chapman Hall/CRC.
[20] Gradshteyn I.S., Ryzhik I.M., 2007, Table of Integrals- Series and Products, Academic Press, New York.