Phasor-Based Double-Ended Method for Fault Location on N-Circuit ‎Transmission Lines ‎

Subject Areas : Research Article

Moossa Khodadadi Arpanahi ¹ , Majid Khoshnama ²

1 - Pardisan Engineering Company, Isfahan, Iran
2 - Pardisan Engineering Company, Isfahan, Iran

Received: 2022-03-03 Accepted : 2022-06-12 Published : 2022-05-22

Keywords: Fault Location, N-circuit, Double-ended, phasor, Transmission,

Abstract :

Existing double-ended fault location methods in transmission systems can be applied only to single or ‎double-circuit transmission lines. They conventionally use different abc-domain or sequence network ‎equivalent circuits for different fault types. Furthermore, some methods do not consider shunt ‎capacitances of the line, inductive or capacitive coupling between different phases, and (or) the cases of ‎untransposed lines, simultaneously. In this paper, a comprehensive and fast phasor-based double-ended ‎fault location method is proposed which can be used for N-circuit transmission lines. For this purpose, first, ‎a matrix-vector equivalent circuit (MVEC) is proposed that leads to a unique formulation for fault location ‎problem regardless of fault type, number of line circuits, being transposed or untransposed while it ‎considers inductive and capacitive coupling between the phases. Then, based on the MVEC formulation, a ‎bi-level algorithm is suggested that quickly finds the fault location, despite its iterative nature. The ‎proposed method does not need to know impedances of local and remote end sources. Furthermore, its ‎accuracy is not sensitive to fault impedance. Various case studies in terms of fault types, fault impedances, ‎and distances from the measurement side in the presence of noise reveal the accuracy and applicability of ‎the proposed fault location method.‎

References:

1. M. Kezunovic, "Smart Fault Location for Smart Grids," in IEEE Transactions on Smart Grid, vol. 2, no. 1, pp. 11-22, March 2011, doi: 10.1109/TSG.2011.2118774.


2. S. Azizi and M. Sanaye-Pasand, "A Straightforward Method for Wide-Area Fault Location on Transmission Networks," in IEEE Transactions on Power Delivery, vol. 30, no. 1, pp. 264-272, Feb. 2015, doi: 10.1109/TPWRD.2014.2334471.


3. J. C. Das, “Power System Analysis : Short-Circuit Load Flow and Harmonics,” Power System Analysis, Apr. 2002, doi: 10.1201/9780203908952.


4. S. Das, S. Santoso, A. Gaikwad and M. Patel, "Impedance-based fault location in transmission networks: theory and application," in IEEE Access, vol. 2, pp. 537-557, 2014, doi: 10.1109/ACCESS.2014.2323353.


5. K. Yu et al., “A novel traveling wave fault location method for transmission network based on time linear dependence,” International Journal of Electrical Power & Energy Systems, vol. 126, p. 106608, Mar. 2021, doi: 10.1016/J.IJEPES.2020.106608.


6. R. J. Hamidi and H. Livani, "Traveling-Wave-Based Fault-Location Algorithm for Hybrid Multiterminal Circuits," in IEEE Transactions on Power Delivery, vol. 32, no. 1, pp. 135-144, Feb. 2017, doi: 10.1109/TPWRD.2016.2589265.


7. F. Deng, X. Zeng, X. Tang, Z. Li, Y. Zu, and L. Mei, “Travelling-wave-based fault location algorithm for hybrid transmission lines using three-dimensional absolute grey incidence degree,” International Journal of Electrical Power & Energy Systems, vol. 114, p. 105306, Jan. 2020, doi: 10.1016/J.IJEPES.2019.05.043.


8. A. Ghorbani and H. Mehrjerdi, “Accurate fault location algorithm for shunt-compensated double circuit transmission lines using single end data,” International Journal of Electrical Power & Energy Systems, vol. 116, p. 105515, Mar. 2020, doi: 10.1016/J.IJEPES.2019.105515.


9. R. Taheri, M. Eslami, and Y. Damchi, “Single-end current-based algorithm for fault location in series capacitor compensated transmission lines,” International Journal of Electrical Power & Energy Systems, vol. 123, p. 106254, Dec. 2020, doi: 10.1016/J.IJEPES.2020.106254.


10. M. S. Sachdev and R. Agarwal, "A technique for estimating transmission line fault locations from digital impedance relay measurements," in IEEE Transactions on Power Delivery, vol. 3, no. 1, pp. 121-129, Jan. 1988, doi: 10.1109/61.4237.


11. A. H. Al-Mohammed and M. A. Abido, "A Fully Adaptive PMU-Based Fault Location Algorithm for Series-Compensated Lines," in IEEE Transactions on Power Systems, vol. 29, no. 5, pp. 2129-2137, Sept. 2014, doi: 10.1109/TPWRS.2014.2303207.


12. B. Mahamedi, M. Sanaye-Pasand, S. Azizi, and J. Guo Zhu, “Unsynchronised fault-location technique for three-terminal lines,” IET Generation, Transmission and Distribution, vol. 9, no. 15, pp. 2099–2107, Nov. 2015, doi: 10.1049/IET-GTD.2015.0062/CITE/REFWORKS.


13. N. Peng, L. Zhou, R. Liang, X. Xue, G. Piliposyan, and Y. Hu, “Fault location on double–circuit transmission lines by phase correction of fault recorder signals without accurate time synchronization,” Electric Power Systems Research, vol. 181, p. 106198, Apr. 2020, doi: 10.1016/J.EPSR.2020.106198.


14. M. Gil, A. A. Abdoos, and M. Sanaye-Pasand, “A precise analytical method for fault location in double-circuit transmission lines,” International Journal of Electrical Power & Energy Systems, vol. 126, p. 106568, Mar. 2021, doi: 10.1016/J.IJEPES.2020.106568.


15. C Chi-Shan Yu, Chih-Wen Liu, Sun-Li Yu and Joe-Air Jiang, "A new PMU-based fault location algorithm for series compensated lines," in IEEE Transactions on Power Delivery, vol. 17, no. 1, pp. 33-46, Jan. 2002, doi: 10.1109/61.974185.


16. D. Cai and J. Zhang, "New Fault-Location Algorithm for Series-Compensated Double-Circuit Transmission Line," in IEEE Access, vol. 8, pp. 210685-210694, 2020, doi: 10.1109/ACCESS.2020.3039877.


17. Joe-Air Jiang, Jun-Zhe Yang, Ying-Hong Lin, Chih-Wen Liu and Jih-Chen Ma, "An adaptive PMU based fault detection/location technique for transmission lines. I. Theory and algorithms," in IEEE Transactions on Power Delivery, vol. 15, no. 2, pp. 486-493, April 2000, doi: 10.1109/61.852973.


18. Joe-Air Jiang, Ying-Hong Lin, Jun-Zhe Yang, Tong-Ming Too and Chih-Wen Liu, "An adaptive PMU based fault detection/location technique for transmission lines. II. PMU implementation and performance evaluation," in IEEE Transactions on Power Delivery, vol. 15, no. 4, pp. 1136-1146, Oct. 2000, doi: 10.1109/61.891494.


19. D. Lu, Y. Liu, S. Chen, B. Wang and D. Lu, "An Improved Noniterative Parameter-Free Fault Location Method on Untransposed Transmission Lines Using Multi-Section Models," in IEEE Transactions on Power Delivery, doi: 10.1109/TPWRD.2021.3085746..


20. H. Mehrjerdi and A. Ghorbani, “High-speed auxiliary fault location element for distance relays in double-circuit lines,” Electric Power Systems Research, vol. 200, p. 107470, Nov. 2021, doi: 10.1016/J.EPSR.2021.107470.


21. Y. Liao and N. Kang, "Fault-Location Algorithms Without Utilizing Line Parameters Based on the Distributed Parameter Line Model," in IEEE Transactions on Power Delivery, vol. 24, no. 2, pp. 579-584, April 2009, doi: 10.1109/TPWRD.2008.2002698.


22. V. Terzija, Z. M. Radojević and G. Preston, "Flexible Synchronized Measurement Technology-Based Fault Locator," in IEEE Transactions on Smart Grid, vol. 6, no. 2, pp. 866-873, March 2015, doi: 10.1109/TSG.2014.2367820.


23. N. I. Elkalashy, “Simplified parameter-less fault locator using double-end synchronized data for overhead transmission lines,” International Transactions on Electrical Energy Systems, vol. 24, no. 6, pp. 808–818, Jun. 2014, doi: 10.1002/ETEP.1736.