Manuscript ID : 669742
Visit : 76
Page: 211 - 223
20.1001.1.20086156.1398.11.40.2.0
Article Type:
Original Research
Investigation Effect of Heat-treatment Process on Crack Restoration, Phase Analysis, Fracture Toughness, Hardness and Microstructure in Alumina-SiC Nanocomposites
Subject Areas :
A. Fathi
1
(
Technical and vocational university, Mianeh, Iran
)
H.R. Baharvandi
2
(
Maleke Ashtar university of technology, Tehran, Iran
)
Received: 2019-12-23
Accepted : 2019-12-23
Published : 2019-12-22
Keywords:
References:
Galusek, D. Galuskova, Nanomaterials, 5, 2015, 115.
L. Huang, P.K Nayak, "Strengthening Alumina Ceramic Matrix Nanocomposites Using Spark Plasma Sintering", Woodhead Publishing Limited, Sawston 2014, 24.
Reveron, O. Zaafrani, G. Fantozzi, J. Eur. Ceram. Soc., 30, 2010, 1351.
Palmero, Nanomaterials, 5, 2015, 656.
B. Shan, Y.Z. Chen, M.M. Gong, H. Dong, B. Li, F. Liu, J. Mater. Sci., 34, 2018, 599.
L. Shi, F.M. Xu, Z.J. Zhang, Y.L. Dong, Y. Tan, L. Wang, J.M. Yang, Mater. Sci. Eng., 527, 2010, 4646.
Ribeiro, G.C. Ribeiro, M.R. Oliveira, Materials Research, 18, 2015, 525.
Wu, K. Zhou, C.Y. Yue, J. Wei, Y. Pan, Progress in Materials Science, 72, 2015, 1.
Chen, S. Yang, J. Wu, J.A.G. Perez, Q. Shen, J.M. Schoenung, E.J. Lavernia, L. Zhang, J. Am. Ceram. Soc., 98, 2015, 732.
W. Kim, K.A. Khalil, J. Am. Ceram. Soc., 89, 2006, 1280.
A. Gazawi, Ph.D. Thesis, University of Waikato, Hamilton, New Zealand, 2014.
Wang, C. Xue, Y. Cao, J. Zhao, Ceram. Int., 44, 2018, 5093.
Cheng, B. Xia, C. Fang, L. Yang, J. Mater. Sci. Technol., 33, 2017, 1187.
Parchoviansky, D. Galusek, M. Michalek, P. Svancarek, M. Kasiarova, J. Dusza, M. Hnatko, Ceram. Int., 40, 2014, 1807.
A. Timms, C.B. Ponton, M. Strangewood, Journal of Eur. Ceram. Soc., 15, 2002, 1569.
Z. Wang, L. Gao, J.K. Guo, Ceramics International, 26, 2000, 391.
Osada, W. Nakao, K. Takahashi, K. Ando, S. Saito, Journal of the European Ceramic Society, 27, 2007, 3261.
Po. Liu, K. Ando, B.S Kim, K. Takahashi, International Communications in Heat and Mass Transfer, 36, 2009, 563.
R. Anatis, P. Chantikul, B.R. Lawn, D.B. Marshall, Journal of the American Ceramic Society, 64, 1981, 533.
T. Johnson, P. Rokebrand, I. Sigalas, "Microstructure and Properties of Al2O3–SiC", Proceedings of the World Congress on Engineering, UK, London, 2014.
Sciti, J. Vicens, A. Bellosi, Journal of Materials Science, 37, 2002, 3747.
Sun, J.G. Li, S. Guo, Z. Xiu, K. Duan, X.Z. Hu, J. Am. Ceram. Soc., 88, 2005, 1536.
Saheb, K. Mohammad, Ceram. Int., 42, 2016, 12330.
Wang, S. Wang, X. Zhang, P. Hu, W. Han, C. Hong, Alloys and Compounds, 4, 2009, 390.
H. Zhang, Z. Wang, P. Hu, W.B. Han, C.Q. Hong, Scripta Materialia, 61, 2009, 809.
Standard test method for Vickers Indentation Hardness of Advan. Ceramics, Book of standard, ASTM C1327-15, 2015.
_||_
Galusek, D. Galuskova, Nanomaterials, 5, 2015, 115.
L. Huang, P.K Nayak, "Strengthening Alumina Ceramic Matrix Nanocomposites Using Spark Plasma Sintering", Woodhead Publishing Limited, Sawston 2014, 24.
Reveron, O. Zaafrani, G. Fantozzi, J. Eur. Ceram. Soc., 30, 2010, 1351.
Palmero, Nanomaterials, 5, 2015, 656.
B. Shan, Y.Z. Chen, M.M. Gong, H. Dong, B. Li, F. Liu, J. Mater. Sci., 34, 2018, 599.
L. Shi, F.M. Xu, Z.J. Zhang, Y.L. Dong, Y. Tan, L. Wang, J.M. Yang, Mater. Sci. Eng., 527, 2010, 4646.
Ribeiro, G.C. Ribeiro, M.R. Oliveira, Materials Research, 18, 2015, 525.
Wu, K. Zhou, C.Y. Yue, J. Wei, Y. Pan, Progress in Materials Science, 72, 2015, 1.
Chen, S. Yang, J. Wu, J.A.G. Perez, Q. Shen, J.M. Schoenung, E.J. Lavernia, L. Zhang, J. Am. Ceram. Soc., 98, 2015, 732.
W. Kim, K.A. Khalil, J. Am. Ceram. Soc., 89, 2006, 1280.
A. Gazawi, Ph.D. Thesis, University of Waikato, Hamilton, New Zealand, 2014.
Wang, C. Xue, Y. Cao, J. Zhao, Ceram. Int., 44, 2018, 5093.
Cheng, B. Xia, C. Fang, L. Yang, J. Mater. Sci. Technol., 33, 2017, 1187.
Parchoviansky, D. Galusek, M. Michalek, P. Svancarek, M. Kasiarova, J. Dusza, M. Hnatko, Ceram. Int., 40, 2014, 1807.
A. Timms, C.B. Ponton, M. Strangewood, Journal of Eur. Ceram. Soc., 15, 2002, 1569.
Z. Wang, L. Gao, J.K. Guo, Ceramics International, 26, 2000, 391.
Osada, W. Nakao, K. Takahashi, K. Ando, S. Saito, Journal of the European Ceramic Society, 27, 2007, 3261.
Po. Liu, K. Ando, B.S Kim, K. Takahashi, International Communications in Heat and Mass Transfer, 36, 2009, 563.
R. Anatis, P. Chantikul, B.R. Lawn, D.B. Marshall, Journal of the American Ceramic Society, 64, 1981, 533.
T. Johnson, P. Rokebrand, I. Sigalas, "Microstructure and Properties of Al2O3–SiC", Proceedings of the World Congress on Engineering, UK, London, 2014.
Sciti, J. Vicens, A. Bellosi, Journal of Materials Science, 37, 2002, 3747.
Sun, J.G. Li, S. Guo, Z. Xiu, K. Duan, X.Z. Hu, J. Am. Ceram. Soc., 88, 2005, 1536.
Saheb, K. Mohammad, Ceram. Int., 42, 2016, 12330.
Wang, S. Wang, X. Zhang, P. Hu, W. Han, C. Hong, Alloys and Compounds, 4, 2009, 390.
H. Zhang, Z. Wang, P. Hu, W.B. Han, C.Q. Hong, Scripta Materialia, 61, 2009, 809.
Standard test method for Vickers Indentation Hardness of Advan. Ceramics, Book of standard, ASTM C1327-15, 2015.
