Preparation and Study of Curing Behavior, Mechanical Properties and Hysteresis of SBR Based Hybrid Nanocomposites of Nanoclay and Carbon Black
Subject Areas :
M. Mohammadi
1
,
M. Karrabi
2
,
M.R. Mottaghi
3
1 - Department of Polymer Engineering, Faculty of Engineering, Qom University of Technology
2 - Department of Processing, Iran Polymer and Petrochemical Institute
3 - Department of Processing, Iran Polymer and Petrochemical Institute
Received: 2023-06-27
Accepted : 2023-06-27
Published : 2023-06-22
Keywords:
References:
Jin, W.M. Noordermeer, A. Blume, W.K. Dierkes, Polymer Testing, 99, 2021, 107212.
Araujo-Morera, R. Verdugo-Manzanares, S. González, R. Verdejo, Journal of Compososites Science, 5, 2021, 68.
Ji, C. Liu, Z. Luo, J. Zhong, L. Yin, Polymer Composites, 42, 2021, 1574.
Zhou, J. Liu, G. Hou, H. Yang, L. Zhang, Polymer, 218, 2021, 123523.
Morton, “Rubber Technology”, Springer Science & Business Media, 2013.
N. Kaynak, S. Sen, Journal of Elastomers & Plastics, 53, 2021, 525.
Elangovan, F.X. Josephraj, A. Kumarmurugesan, B. Pandian, Material Plastice, 58, 2021, 34.
Sun, J. Huang, J. He, Z. Tang, L. Zhu, F. Liu, Polymer Degradation and Stability, 185, 2021, 109482.
Ikeda, A. Kato, S. Kohjiya, Y. Nakajima, “Rubber Science: A Modern Approach”, Springer, 2018.
Gaca, M. Ilcikova, M. Mrlik, M. Cvek, C. Vaulot, Sensors and Actuators B: Chemical, 329, 2021, 129195.
Idrees, F. Saeed, A. Amin, T. Hussain, Journal of Building Engineering, 44, 2021, 102651.
M.C. Mistretta, L. Botta, R. Arrigo, F. Leto, G. Malucelli, F.P.L. Mantia, Polymers, 13, 2021, 1167.
Roy, T. Mondal, S. Kar, K. Naskar, R. Ghosal, Journal of Applied Polymer Science, 138, 2021, 49093.
P. Wani, R. Raja, M. Reddy, S. Deshpande, Advances in Materials and Processing Technologies, 15, 2021, 1.
Roy, T. Mondal, S. Kar, K. Naskar, R. Ghosal, Journal of Applied Polymer Science, 138, 2021, 49093.
Rajeshkumar, S. Arvindh Seshadri, S. Ramakrishnan, M.R. Sanjay, S. Siengchin, K.C. Nagaraja, Polymer Composites, 42, 2021, 3687.
Satheesan, A.S. Mohammed, Wear, 15, 2021, 466.
Ahmadi-Shooli, M. Tavakoli, Iranian Journal of Polymer Science and Technology, 30, 2017, 127.
Staropoli, V. Roge, E. Moretto, J. Didierjean, M. Michel, B. Duez, P. Steiner, G. Thielen, D. Lenoble, J.S. Thomann, Polymers, 13, 2021, 2413.
J. He, Y.Q. Wang, M.M. Xi, J. Lin, Y. Xue, L.Q. Zhang, Polymer Degradation and Stability, 98, 2013, 9, 1773.
K.M. Kumar, S. Subramaniam, R. Rathanasamy, S.K. Pal, S.K. Palaniappan, Journal of Rubber Research, 23, 2020, 79.
Shiva, S.S. Akhtari, M. Shayesteh, Iranian Polymer Journal, 29, 2020, 957.
Wu, W. Zhao, L. Zhang, Macromolecular Materials and Engineering, 291, 2006, 944.
Ma, Y. Wang, L. Zhang, and Y. Wu, Journal of Applied Polymer Science, 125, 2012, 3484.
J. He, Y.Q. Wang, M.M. Xi, J. Lin, Y. Xue, L.Q. Zhang, Polymer Degradation and Stability, 98, 2013, 1773.
A. Gopi, S.K. Patel, A.K. Chandra, D.K. Tripathy, Journal of Polymer Research, 18, 2011, 1625.
K. Chattopadhyay, S. Chattopadhyay, N.C. Das, P.P. Bandyopadhyay, Materials and Design, 32, 2011, 4696.
Guo, F. Zaïri, H. Baraket, M. Chaabane, X. Guo, European Polymer Journal, 96, 2017, 145.
Praveen, P.K. Chattopadhyay, S. Jayendran, B.C. Chakraborty, Polymer International, 59, 2010, 187.
A. Ciullo, N. Hewitt, “Rubber formulary”, Noyes Publications, New York, 1999.
J. Kim, D. Kim, B. Ahn, H.J. Lee, H.J. Kim, W. Kim, Polymers, 12, 2020, 2343.
Elangovan, F.X. Josepheraj, A.K. Murugesan, B Pandian, Materiale Plastice, 58, 2021, 34.
Castano-Rivera, I. Calle-Holguín, J. Castano, G. Cabrera-Barjas, K. Galvez-Garrido, E. Troncoso-Ortega, Polymers, 13, 2021, 1085.
V. Varghese, H.A. Kumar, S. Anitha, S. Ratheesh, R.S. Rajeev, V.L. Rao, Carbon, 61, 2013, 476.
Choi, M.A. Kader, B. Cho, Y. Huh, C. Nah, Journal of Applied Polymer Science, 98, 2005, 1688.
Bhattacharyya, S. Dasgupta, V. Londa, R. Mukhopadhyay, Journal of Applied Polymer Science, 136, 2019, 47560.
Barghamadi, M. Karrabi, M.H.R. Ghoreishy, S. Mohammadian‐Gezaz, Journal of Applied Polymer Science, 136, 2019, 47550.
Li, J. Zhang, S. Chen, Express Polymer Letters, 2, 2009, 695.
L. Studebaker, E.W.D. Huffman, A.C. Wolfe, L.G. Nabors, Industrial & Engineering Chemistry, 48, 1956, 162.
Esmizadeh, G. Naderi, S.M.R. Paran, Polymer Composites, 38, 2017, E181.
Ravikumar, K. Palanivelu, K. Ravichandran, Applied Mechanics and Materials, 766, 2015, 377.
Annadurai, T. Mukundan, R. Joseph, Plastics Rubber and Composites, 42, 2013, 379.
Praveen, P.K. Chattopadhyay, P. Albert, V.G. Dalvi, B.C. Chakraborty, S. Chattopadhyay, Composites Part A: Applied Science and Manufacturing, 40, 2009, 309.
E. Mark, B. Erman, M. Roland, “The science and technology of rubber”, Academic press, 2013.
H.R. Ghoreishy, M. Firouzbakht, G. Naderi, Iranian Journal of Polymer Science and Technology, 26, 2013, 45.
Ghasemi, M. Karrabi, M. Mohammadi, H. Azizi, Express Polymer Letters, 4, 2010, 62.
Singh, M.D. Shah, Journal of Information Knowledge and Research in Mechanical Engineering, 2, 2013, 515.
S. Mohammadian-Gezaz, M. Karrabi, Progress in Rubber, Plastics and Recycling Technology, 33, 2017, 261.
_||_
Jin, W.M. Noordermeer, A. Blume, W.K. Dierkes, Polymer Testing, 99, 2021, 107212.
Araujo-Morera, R. Verdugo-Manzanares, S. González, R. Verdejo, Journal of Compososites Science, 5, 2021, 68.
Ji, C. Liu, Z. Luo, J. Zhong, L. Yin, Polymer Composites, 42, 2021, 1574.
Zhou, J. Liu, G. Hou, H. Yang, L. Zhang, Polymer, 218, 2021, 123523.
Morton, “Rubber Technology”, Springer Science & Business Media, 2013.
N. Kaynak, S. Sen, Journal of Elastomers & Plastics, 53, 2021, 525.
Elangovan, F.X. Josephraj, A. Kumarmurugesan, B. Pandian, Material Plastice, 58, 2021, 34.
Sun, J. Huang, J. He, Z. Tang, L. Zhu, F. Liu, Polymer Degradation and Stability, 185, 2021, 109482.
Ikeda, A. Kato, S. Kohjiya, Y. Nakajima, “Rubber Science: A Modern Approach”, Springer, 2018.
Gaca, M. Ilcikova, M. Mrlik, M. Cvek, C. Vaulot, Sensors and Actuators B: Chemical, 329, 2021, 129195.
Idrees, F. Saeed, A. Amin, T. Hussain, Journal of Building Engineering, 44, 2021, 102651.
M.C. Mistretta, L. Botta, R. Arrigo, F. Leto, G. Malucelli, F.P.L. Mantia, Polymers, 13, 2021, 1167.
Roy, T. Mondal, S. Kar, K. Naskar, R. Ghosal, Journal of Applied Polymer Science, 138, 2021, 49093.
P. Wani, R. Raja, M. Reddy, S. Deshpande, Advances in Materials and Processing Technologies, 15, 2021, 1.
Roy, T. Mondal, S. Kar, K. Naskar, R. Ghosal, Journal of Applied Polymer Science, 138, 2021, 49093.
Rajeshkumar, S. Arvindh Seshadri, S. Ramakrishnan, M.R. Sanjay, S. Siengchin, K.C. Nagaraja, Polymer Composites, 42, 2021, 3687.
Satheesan, A.S. Mohammed, Wear, 15, 2021, 466.
Ahmadi-Shooli, M. Tavakoli, Iranian Journal of Polymer Science and Technology, 30, 2017, 127.
Staropoli, V. Roge, E. Moretto, J. Didierjean, M. Michel, B. Duez, P. Steiner, G. Thielen, D. Lenoble, J.S. Thomann, Polymers, 13, 2021, 2413.
J. He, Y.Q. Wang, M.M. Xi, J. Lin, Y. Xue, L.Q. Zhang, Polymer Degradation and Stability, 98, 2013, 9, 1773.
K.M. Kumar, S. Subramaniam, R. Rathanasamy, S.K. Pal, S.K. Palaniappan, Journal of Rubber Research, 23, 2020, 79.
Shiva, S.S. Akhtari, M. Shayesteh, Iranian Polymer Journal, 29, 2020, 957.
Wu, W. Zhao, L. Zhang, Macromolecular Materials and Engineering, 291, 2006, 944.
Ma, Y. Wang, L. Zhang, and Y. Wu, Journal of Applied Polymer Science, 125, 2012, 3484.
J. He, Y.Q. Wang, M.M. Xi, J. Lin, Y. Xue, L.Q. Zhang, Polymer Degradation and Stability, 98, 2013, 1773.
A. Gopi, S.K. Patel, A.K. Chandra, D.K. Tripathy, Journal of Polymer Research, 18, 2011, 1625.
K. Chattopadhyay, S. Chattopadhyay, N.C. Das, P.P. Bandyopadhyay, Materials and Design, 32, 2011, 4696.
Guo, F. Zaïri, H. Baraket, M. Chaabane, X. Guo, European Polymer Journal, 96, 2017, 145.
Praveen, P.K. Chattopadhyay, S. Jayendran, B.C. Chakraborty, Polymer International, 59, 2010, 187.
A. Ciullo, N. Hewitt, “Rubber formulary”, Noyes Publications, New York, 1999.
J. Kim, D. Kim, B. Ahn, H.J. Lee, H.J. Kim, W. Kim, Polymers, 12, 2020, 2343.
Elangovan, F.X. Josepheraj, A.K. Murugesan, B Pandian, Materiale Plastice, 58, 2021, 34.
Castano-Rivera, I. Calle-Holguín, J. Castano, G. Cabrera-Barjas, K. Galvez-Garrido, E. Troncoso-Ortega, Polymers, 13, 2021, 1085.
V. Varghese, H.A. Kumar, S. Anitha, S. Ratheesh, R.S. Rajeev, V.L. Rao, Carbon, 61, 2013, 476.
Choi, M.A. Kader, B. Cho, Y. Huh, C. Nah, Journal of Applied Polymer Science, 98, 2005, 1688.
Bhattacharyya, S. Dasgupta, V. Londa, R. Mukhopadhyay, Journal of Applied Polymer Science, 136, 2019, 47560.
Barghamadi, M. Karrabi, M.H.R. Ghoreishy, S. Mohammadian‐Gezaz, Journal of Applied Polymer Science, 136, 2019, 47550.
Li, J. Zhang, S. Chen, Express Polymer Letters, 2, 2009, 695.
L. Studebaker, E.W.D. Huffman, A.C. Wolfe, L.G. Nabors, Industrial & Engineering Chemistry, 48, 1956, 162.
Esmizadeh, G. Naderi, S.M.R. Paran, Polymer Composites, 38, 2017, E181.
Ravikumar, K. Palanivelu, K. Ravichandran, Applied Mechanics and Materials, 766, 2015, 377.
Annadurai, T. Mukundan, R. Joseph, Plastics Rubber and Composites, 42, 2013, 379.
Praveen, P.K. Chattopadhyay, P. Albert, V.G. Dalvi, B.C. Chakraborty, S. Chattopadhyay, Composites Part A: Applied Science and Manufacturing, 40, 2009, 309.
E. Mark, B. Erman, M. Roland, “The science and technology of rubber”, Academic press, 2013.
H.R. Ghoreishy, M. Firouzbakht, G. Naderi, Iranian Journal of Polymer Science and Technology, 26, 2013, 45.
Ghasemi, M. Karrabi, M. Mohammadi, H. Azizi, Express Polymer Letters, 4, 2010, 62.
Singh, M.D. Shah, Journal of Information Knowledge and Research in Mechanical Engineering, 2, 2013, 515.
S. Mohammadian-Gezaz, M. Karrabi, Progress in Rubber, Plastics and Recycling Technology, 33, 2017, 261.
