Metallurgical Aspects of the Spinning Process in Metallic Liners

Subject Areas : Journal of Environmental Friendly Materials

S. M. J Hoseini ¹ , H Ghayour ² , A. S Golazani ³ , M. K Asgarani ⁴ , I Ebrahimzadeh ⁵

1 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
2 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
3 - Department of Materials Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran
4 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran
5 - Advanced Materials Research Center, Department of Materials Engineering, Najafabad Branch, Islamic Azad University, Najafabad, Iran

Received: 2021-02-17 Accepted : 2021-04-06 Published : 2021-06-01

Keywords: Microstructure, texture, Spinning, Shear Forming, Flow Forming,

References:

[1] P. Pawar, A. Pagar, A. Shah and S. Yevale, Int. J. Recent Innov. Trends Comput. Commun., 5(2017), 1280.

[2] S. Kalpakjian and S. Rajagopal, Appl. Metalworking, 2(1982), 211.

[3] D. Marini, D. Cunningham, P. Xirouchakis and J. Corney, Int. J. Mech. Eng. Technol. (IJMET), 7(2016), 285.

[4] C. C. Wong, T. Dean and J. Lin, International J. Mach. Tools Manuf., 43(2003), 1419.

[5] Q. Xia, G. Xiao, H. Long, X. Cheng and X. Sheng, Int. J. of Mach. Tools Manuf., 85(2014), 100.

[6] E. Hagan and J. Jeswiet, Proc. Inst. Mech. Eng., Part B: J. Eng. Manuf., 217(2003), 213.

[7] W. F. Hosford and R. M. Caddell: Metal Forming Mechanics And Metallurgy, Third Edition, Cambridge University Press, (2007).

[8] M. Sivanandini, S. Dhami and B. Pabla, Int. J. Sci. Eng. Res., 3(2012), 1.

[9] M. Hayama, T. Murota and H. Kudo, Bulletin Of JSME, 8(1965),453.

[10] B. Avitzur and C. T. Yang, Journal of Eng. Ind., Trans. of the ASME, 82(1960), 231.

[11] S. Kobayashi, I. K. Hall and E. G. Thomsen, J. of Eng. Ind., Trans. of the ASME, 83(1961), 485.

[12] M. Held, Propellants, Explosives, Pyrotechnics, 10(1985), 125.

[13] F. Wang, P. Su, L. Qin, S. Dong, Y. Li and j. Dong, Acta Metallurg. Sin., 33(2020), 1226.

[14] H. Beni, Y. Beni and F. Biglari, Part C: J. Mech. Eng. Sci., 225(2010), 509.

[15] M.Tapase, M. han and K.V.Gurav, Int. J. Eng. Dev..Res., 12(2014), 3004.

[16] L. Radović, M. Nikačević and B. Jordović, Trans. Nonferrous Metals Soc. China, 22(2012), 991.

[17] M. Zhan, X. Wang and H. Long, Mater. Des., 108(2016), 207.

[18] D. Brandon, P. Ari gur, Z. Bratt and M. Gur, Mater. Sci. Eng., 44(1980), 185.

[19] X.X.Wang, M.Zhan and M.W.Fu, Procedia. Eng., 207(2017), 1725.

[20] M. Guillot, T. McCormack, M. Tuffs, A. Rosochowsk, S.Halliday and P. Blackwell, Procedia. Eng., 207(2017), 1719.

[21] K. Valdez, B. Wynne and M. Lee, Proceedings Of The 22nd International Esaform Conference On Mater. Forming: Esaform 2019(AIP), 2113(2019), 170001.

[22] Z. Li, M. Zhan, X. Fan, X. Wang and F. Ma, J. Mater. Res. Technol., 9(2020), 4706.

[23] C. Kubilay, Writer, Flow Forming Of Aeroengine Materials. [Performance], PHD Thesis, University of Manchester,En., (2014).

[24] G. Xiao, Q. Xia, X. Cheng and Y. Zhou, The Int. J. Adv. Manuf. Technol., 78(2015), 971.

[25] P.Maj, P.Blyskun, S.Kut, B.Romelczyk-Baishya, T.Morgala, B.Adamczyk-Cieslak and J.Mizera, J. Mater. Proces. Tech., 253(2018), 64.

[26] Q. Xia, G. Xiao, H. Long, X. Cheng and B. Yang, Mater. Des., 59(2014), 516.

[27] X. Y. Wu, H. R. Zhang, H. L. Chen, L. N. Jia and H. Zhang, China Foundry, 14, (2017),138.

[28] W. C. Xu, D. B. Shan, Z. L. Wang, G. P. Yang, Y. LÜ and D. C. Kang, Trans. Nonferrous Metals Soc. of China, 17, (2007), 1205.

[29] S.Debin, L.Yan, L.Ping and X. Yi, J. Mater. Proces. Technol., 115(2001), 380.

[30] C. X. Ren, Q. Wang, Z. J. Zhang, Y. K. Zhu and Z. F. Zhang, Acta. Metallurg. Sin. (En. Lett.), 30, (2017), 212.

[31] S. Gondo, H. Arai, S. Kajino and S. Nakano, Metals, 10, (2020), 793.