Effect of Formaldehyde on Pulsed Electro-Plated Nickel-Alumina Nanocomposite Coatings
Subject Areas : Journal of Environmental Friendly MaterialsS Mirzamohammadi 1 , M Velashjerdi 2 , A Anbarzadeh 3
1 - Department of Materials and Metallurgical Engineering, Technical and Vocational
University (TVU), Tehran, Iran
2 - Department of Materials Science and Engineering, Faculty of Engineering, Arak University, Arak, Iran
3 - Department of Mechanical Engineering, Technical and Vocational University (TVU), Tehran, Iran
Keywords: Formaldehyde, Zeta Potential, Composite Electrodeposition, Nickel Alumina Nanocomposite,
Abstract :
[1] P. KumarRai and A. Gupta. Mater. Today. Proce., online (2021).
[2] D. G. Portela, T. C. d. M. Nepel, J. M. Costa and A. F. D. A. Neto, Mater. Sci. and Eng., B. 260, (2020), 114.
[3] C. Yan, N. Karthik and D. Xiong, Ceram. Int. 46, 10, Part A, (2020), 15714.
[4] S. R. Allahkaram, S. Golroh and M. MohammadAlipour. Mater. & Des. 32, 8–9, (2011), 4478.
[5] S. T. Aruna and G. Srinivas. Surf. Eng. 31, (2015), 708.
[6] M. M. Kamel, Q. Mohsen, Z. A. Hamid, S. M. Rashwan, I. S. Ibrahim and S. M. El–Sheikh. Int. J. Electron. Sci. 16, (2021), 1.
[7] Y. Chen, Y. Hao, W. Huang and Y. Ji, W. Yang. Surf. Coat. Tech., 310, (2017), 122.
[8] N. Elkhoshkhany, A. Hafnway and A. Khaled, J. Alloy. Comp. 695, (2017), 1505.
[9] H. K. Lee, H. Y. Lee and J. M. Jeon. Surf. Coati. Tech. 201, (2007), 4711.
[10] K. Zielińska, A. Stankiewicz and I. Szczygieł. J. Collo. Int. Sci. 377, (2012), 362.
[11] D. Lee, Y. X. Gan, X. Chen and J. W. Kysar, Mater. Sci. and Eng. A. 447, (2007), 209.
[12] J. A. Calderón, J. E. Henao and M. A. Gómez. Elect. Acta. 124, (2014), 190.
[13] S. Dehgahi, R. Amini and M. Alizadeh. 692, (2017), 622.
[14] S. Ghaziof and W. Gao, J. of Alloy. and Compo. 622, (2015), 918.
[15] Y. Wang, Y. Li and Z. Zhu, Mater. Sci. and Eng., A, 775, (2020), 138.
[16] H. K. Lee, H. Y. Lee and J. M. Jeon. Surf. and Coati. Tech., 201, (2007), 4711.
[17] H. Gül, F. Kılıç, M. Uysal, S. Aslan, A. Alp and H. Akbulut. Appli. Surf. Sci. 258, (2012), 4260.
[18] H. Gül, F. Kılıç, S. Aslan, A. Alp and H. Akbulut, Wear, 267, (2009), 976.
[19] L. Chen, L. Wang, Z. Zeng and T. Xu. Surf. and Coat. Tech., 201, (2006), 599.
[20] R. Sen, S. Bhattacharya, S. Das and K. Das, J. Alloy. and Compo., 489, (2010), 650.
[21] D. Thiemig and A. Bund, Appl. Surf. Sci., 255, (2009), 4164.