Optimization of the Degumming Process in Injection Molding of Amorphous Nano/micro Silica and Zircon Powders: Experimental Analysis and Modeling
Subject Areas :
1 - Department of Mechanical Engineering, Karaj Branch, Islamic Azad University, Karaj, Iran
Keywords:
Abstract :
References:
[1] A. Askari, V. Momeni, Materials Chemistry and Physics, 271, 2021, 124926.
[2] H. Xie, J. Jiang, X. Yang, Q. He. Z. Zhou, X. Xu, L. Zhang, International Journal of Applied Ceramic Technology, 17, 2020, 1098.
[3] T. Dreier, A. Riaz, A. Ahrend, C. Polley, S. Bode, B. Milkereit, H. Seitz, Materials & Design, 227, 2023, 111806.
[4] H. Wei Li, Z. Yi Peng, G. Qing Chen, M. Hao Li, X. Song Fu, Ceramics International, 48, 2022, 25513.
[5] J. Zhu, L. Qiao, J. Zheng, Y. Ying, W. Cai, J. Li, J. Yu, Journal of the American Ceramic Society, 107, 2024, 4512.
[6] D. Sanetrnik, T. Sedlacek, Heliyon, 10, 2024.
[7] S.M. Ani, A. Muchtar, N. Muhamad, Ceramics International, 40, 2014, 2819.
[8] Y. Li, X. Peng, X. Zan, Metals (Basel), 15, 2025, 38.
[9] Z. Shi, Z.X. Guo, J.H. Song, Acta Materialia, 50, 2002, 1937.
[10] M. Sclavons, M. Laurent, J. Devaux, Polymer (Guildford), 46, 2005, 8062.
[11] V. Momeni, M. Hossein Alaei, A. Askari, Materials and Werkstoffechnologie, 50, 2019, 432.
[12] V. Momeni, A. Askari, M.H. Allaei, Transactions of the Indian Institute of Metals, 74, 2021, 2639.
[13] S. Rezaei, A. Askari, Iranian Polymer Journal, 33, 2024, 1.
[14] J.W. Oh, W.S. Lee, Powder Technology, 311, 2017, 18.
[15] S.V. Atre, R.K. Enneti, Powder Metallurgy, 51, 2008, 123.
[16] V. Momeni, A. Askari, M.H. Alaei, Transactions of the Indian Institute of Metals, 72, 2019, 3027.
[17] M.I.H. Chua, A.B. Sulong, M.F. Abdullah, Sains Malaysiana, 42, 2013, 531.
[18] R.M. German, "Powder Injection Molding–Design and Applications", Innovative Material Solutions Inc., State College, PA, USA.
[19] E.S. Thian, N.H. Loh, K.A. Khor, Advanced Powder Technology, 12, 2001, 361.
[20] M.R. Barone, J.C. Ulicny, Journal of the American Ceramic Society, 73, 1990, 3323.
[21] B. Hausnerova, L. Marcanikova, P. Filip, Polymer Engineering & Science, 51, 2011, 1376.
[22] S. Rezaei, A. Askari, Powder Metallurgy, 67, 2024, 246.
[23] W.J. Tseng, C. Hsu, Ceramics International, 25, 1999, 461.
[24] J.A. Lewis, Annual Review of Materials Science, 27, 1997, 147.
[25] J.W. Oh, W.S. Lee, S.J. Park, International Journal of Advanced Manufacturing Technology, 97, 2018, 4115.
[26] G. Aggarwal, I. Smid, S.J. Park, International Journal of Refractory Metals and Hard Materials, 25, 2007, 226.
[1] A. Askari, V. Momeni, Materials Chemistry and Physics, 271, 2021, 124926.
[2] H. Xie, J. Jiang, X. Yang, Q. He. Z. Zhou, X. Xu, L. Zhang, International Journal of Applied Ceramic Technology, 17, 2020, 1098.
[3] T. Dreier, A. Riaz, A. Ahrend, C. Polley, S. Bode, B. Milkereit, H. Seitz, Materials & Design, 227, 2023, 111806.
[4] H. Wei Li, Z. Yi Peng, G. Qing Chen, M. Hao Li, X. Song Fu, Ceramics International, 48, 2022, 25513.
[5] J. Zhu, L. Qiao, J. Zheng, Y. Ying, W. Cai, J. Li, J. Yu, Journal of the American Ceramic Society, 107, 2024, 4512.
[6] D. Sanetrnik, T. Sedlacek, Heliyon, 10, 2024.
[7] S.M. Ani, A. Muchtar, N. Muhamad, Ceramics International, 40, 2014, 2819.
[8] Y. Li, X. Peng, X. Zan, Metals (Basel), 15, 2025, 38.
[9] Z. Shi, Z.X. Guo, J.H. Song, Acta Materialia, 50, 2002, 1937.
[10] M. Sclavons, M. Laurent, J. Devaux, Polymer (Guildford), 46, 2005, 8062.
[11] V. Momeni, M. Hossein Alaei, A. Askari, Materials and Werkstoffechnologie, 50, 2019, 432.
[12] V. Momeni, A. Askari, M.H. Allaei, Transactions of the Indian Institute of Metals, 74, 2021, 2639.
[13] S. Rezaei, A. Askari, Iranian Polymer Journal, 33, 2024, 1.
[14] J.W. Oh, W.S. Lee, Powder Technology, 311, 2017, 18.
[15] S.V. Atre, R.K. Enneti, Powder Metallurgy, 51, 2008, 123.
[16] V. Momeni, A. Askari, M.H. Alaei, Transactions of the Indian Institute of Metals, 72, 2019, 3027.
[17] M.I.H. Chua, A.B. Sulong, M.F. Abdullah, Sains Malaysiana, 42, 2013, 531.
[18] R.M. German, "Powder Injection Molding–Design and Applications", Innovative Material Solutions Inc., State College, PA, USA.
[19] E.S. Thian, N.H. Loh, K.A. Khor, Advanced Powder Technology, 12, 2001, 361.
[20] M.R. Barone, J.C. Ulicny, Journal of the American Ceramic Society, 73, 1990, 3323.
[21] B. Hausnerova, L. Marcanikova, P. Filip, Polymer Engineering & Science, 51, 2011, 1376.
[22] S. Rezaei, A. Askari, Powder Metallurgy, 67, 2024, 246.
[23] W.J. Tseng, C. Hsu, Ceramics International, 25, 1999, 461.
[24] J.A. Lewis, Annual Review of Materials Science, 27, 1997, 147.
[25] J.W. Oh, W.S. Lee, S.J. Park, International Journal of Advanced Manufacturing Technology, 97, 2018, 4115.
[26] G. Aggarwal, I. Smid, S.J. Park, International Journal of Refractory Metals and Hard Materials, 25, 2007, 226.
