Subject Areas : Telecommunication
1 -
Keywords:
Abstract :
References:
1. Ginzburg, V.B., Metallurgical design of flat rolled steels. 2020: CRC press.
2. Yu, C., et al., Effect of carbon content on the microstructure and bonding properties of hot-rolling pure titanium clad carbon steel plates. Materials Science and Engineering: A, 2021. 820: p. 141572.
3. Sathish, T., et al., Temperature distribution analysis on diffusion bonded joints of Ti-6Al-4V with AISI 4140 medium carbon steel. Materials Today: Proceedings, 2020. 21: p. 847-856.
4. Pereira, A.B. and F.J. de Melo, Quality assessment and process management of welded joints in metal construction—A review. Metals, 2020. 10(1): p. 115.
5. Zhang, Y.M., et al., Advanced welding manufacturing: a brief analysis and review of challenges and solutions. Journal of manufacturing science and engineering, 2020. 142(11): p. 110816.
6. Kiahosseini, S.R. and A. Aminian, Mechanical and corrosion performance of multilayer ceramic coatings deposited on an austenitic stainless steel using plasma spray. Bulletin of materials science, 2019. 42(4): p. 160.
7. Zhou, W., et al., Effect of microsilica content on microstructure and properties of foamed ceramics with needle-like mullite. Processing and Application of Ceramics, 2019. 13(2): p. 202-209.
8. Zaretskiy, L., Microsilica in sodium silicate bonded sands. International Journal of Metalcasting, 2019. 13(1): p. 58-73.
9. Kong, D., et al., Effect and mechanism of colloidal silica sol on properties and microstructure of the hardened cement-based materials as compared to nano-silica powder with agglomerates in micron-scale. Cement and Concrete Composites, 2019. 98: p. 137-149.
10. Karlina, A.I., Y.I. Karlina, and V.A. Gladkikh, Analysis of experience in the use of micro-and nanoadditives from silicon production waste in concrete technologies. Minerals, 2023. 13(12): p. 1525.
11. Annamalai, J., Welding electrode flux coating.
12. Murugan, S.S. and P. Sathiya, Analysis of welding hazards from an occupational safety perspective. Vietnam journal of science, technology and engineering, 2024. 66(3): p. 63-74.
13. Afriansyah, A.A. and A. Arifin, Dissimilar metal welding using Shielded metal arc welding: A Review. Technol. Rep. Kansai Univ, 2020. 62(4): p. 1935-1948.
14. Dobrzański, L., L. Dobrzański, and A. Dobrzańska-Danikiewicz, Manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics. Journal of Achievements in Materials and Manufacturing Engineering, 2020. 99(1): p. 14-41.
15. Babinets, A. and I. Ryabtsev, Classification of methods of modification and microalloying of deposited metal. The Paton Welding J, 2021. 9: p. 2-8.
16. Li, R. and T. Li, Advanced Welding Methods and Equipment. 2024: Springer.
17. Wang, X., et al., Functional metal powders: Design, properties, applications, and prospects. Materials Science and Engineering: B, 2022. 280: p. 115708.
18. Takayasu, S., O. Umezawa, and K. Hashimoto, Tribofilm properties and microcrack morphologies for a carburized SCM420 steel under high-pressure rolling sliding contact fatigue with lubricants containing high sulfur-and phosphorus-additives. Wear, 2022. 502: p. 204397.
19. Kiahosseini, S.R., et al., Adhesion, microstrain, and corrosion behavior of ZrN-coated AZ91 alloy as a function of temperature. Journal of Materials Research, 2013. 28(19): p. 2709-2714.
1. Ginzburg, V.B., Metallurgical design of flat rolled steels. 2020: CRC press.
2. Yu, C., et al., Effect of carbon content on the microstructure and bonding properties of hot-rolling pure titanium clad carbon steel plates. Materials Science and Engineering: A, 2021. 820: p. 141572.
3. Sathish, T., et al., Temperature distribution analysis on diffusion bonded joints of Ti-6Al-4V with AISI 4140 medium carbon steel. Materials Today: Proceedings, 2020. 21: p. 847-856.
4. Pereira, A.B. and F.J. de Melo, Quality assessment and process management of welded joints in metal construction—A review. Metals, 2020. 10(1): p. 115.
5. Zhang, Y.M., et al., Advanced welding manufacturing: a brief analysis and review of challenges and solutions. Journal of manufacturing science and engineering, 2020. 142(11): p. 110816.
6. Kiahosseini, S.R. and A. Aminian, Mechanical and corrosion performance of multilayer ceramic coatings deposited on an austenitic stainless steel using plasma spray. Bulletin of materials science, 2019. 42(4): p. 160.
7. Zhou, W., et al., Effect of microsilica content on microstructure and properties of foamed ceramics with needle-like mullite. Processing and Application of Ceramics, 2019. 13(2): p. 202-209.
8. Zaretskiy, L., Microsilica in sodium silicate bonded sands. International Journal of Metalcasting, 2019. 13(1): p. 58-73.
9. Kong, D., et al., Effect and mechanism of colloidal silica sol on properties and microstructure of the hardened cement-based materials as compared to nano-silica powder with agglomerates in micron-scale. Cement and Concrete Composites, 2019. 98: p. 137-149.
10. Karlina, A.I., Y.I. Karlina, and V.A. Gladkikh, Analysis of experience in the use of micro-and nanoadditives from silicon production waste in concrete technologies. Minerals, 2023. 13(12): p. 1525.
11. Annamalai, J., Welding electrode flux coating.
12. Murugan, S.S. and P. Sathiya, Analysis of welding hazards from an occupational safety perspective. Vietnam journal of science, technology and engineering, 2024. 66(3): p. 63-74.
13. Afriansyah, A.A. and A. Arifin, Dissimilar metal welding using Shielded metal arc welding: A Review. Technol. Rep. Kansai Univ, 2020. 62(4): p. 1935-1948.
14. Dobrzański, L., L. Dobrzański, and A. Dobrzańska-Danikiewicz, Manufacturing technologies thick-layer coatings on various substrates and manufacturing gradient materials using powders of metals, their alloys and ceramics. Journal of Achievements in Materials and Manufacturing Engineering, 2020. 99(1): p. 14-41.
15. Babinets, A. and I. Ryabtsev, Classification of methods of modification and microalloying of deposited metal. The Paton Welding J, 2021. 9: p. 2-8.
16. Li, R. and T. Li, Advanced Welding Methods and Equipment. 2024: Springer.
17. Wang, X., et al., Functional metal powders: Design, properties, applications, and prospects. Materials Science and Engineering: B, 2022. 280: p. 115708.
18. Takayasu, S., O. Umezawa, and K. Hashimoto, Tribofilm properties and microcrack morphologies for a carburized SCM420 steel under high-pressure rolling sliding contact fatigue with lubricants containing high sulfur-and phosphorus-additives. Wear, 2022. 502: p. 204397.
19. Kiahosseini, S.R., et al., Adhesion, microstrain, and corrosion behavior of ZrN-coated AZ91 alloy as a function of temperature. Journal of Materials Research, 2013. 28(19): p. 2709-2714.
