Subject Areas : journal of New Materials

مجید پورانوری ¹ (مربی، گروه مهندسی مواد، دانشگاه آزاد اسلامی واحد دزفول)
پیروز مرعشی ² (- استادیار، دانشکده معدن و متالورژی، دانشگاه صنعتی امیرکبیر)

Received: 2015-12-30 Accepted : 2015-12-30 Published : 2011-03-21

Keywords:

References:

1- M. Pouranvari., and S.P.H. Marashi., Keyfactors influencing mechanical performance of

dual phase steel resistance spot welds, SciTechnol Weld Join, Vol15,pp.149-155, 2010.

2- M. Pouranvari., H. R. Asgari., S. M.Mosavizadeh., P. H. Marashi., and M.

Goodarzi., Effect of weld nugget size onoverload failure mode of resistance spot welds,

Sci.Technol. Weld. Joining, Vol.12, pp.217-225, 2007.

3- N. T. Williams., and J. D. Parker., Int.Mater. Rev., Review of resistance spot welding

of steel sheets: Part 1 - Modelling and controlof weld nugget formation, Vol.49, p.45 -75,

2004.

4- X. Sun., E.V. Stephens., and M.A. Khaleel.,Effects of fusion zone size and failure mode on

peak load and energy absorption of advancedhigh strength steel spot welds under lap shear

loading conditions, Eng. Fail. Anal., Vol.15,pp. 356-367,2008.

5- M. Pouranvari., A. Abedi., P. Marashi., andM. Goodarzi., Effect of expulsion on peak load

and energy absorption of low carbon resistancespot welds, Sci. Technol. Weld. Joining,

Vol.13, pp.39-43., 2008

6- N. Harlin., T. B. Jones., and J. D. Parker.,Sci. Technol. Weld. Join, Weld growth

mechanisms during resistance spot welding oftwo and three thickness lap joints, Vol.7,

pp.35-41, 2002.

7- N. Harlin., T. B. Jones, and J. D. Parker,Weld growth mechanism of resistance spot

welds in zinc coated steel ,J. Mater. Proc.Tech, Vol.143-144, pp.448-45, 2003.

8- M.A. Ninshu., and H. Murakawa.,Numerical and experimental study on nugget

formation in resistance spot welding for threepieces of high strength steel sheets, J. Mater.

Proc. Tech , Vol.210,pp.2045-2052, 2010.

9- J. Shen., Y. Zhang., X. Lai., and P.C.Wang., Modeling of resistance spot welding of

multiple stacks of steel sheets, Materials &Design,Vol.32,pp.550-560. 2011.

10- T. Coon., A. Elliott., A. Joaquin., R.Koganti., A. Wexler., R. Bhatnagar., and S. 

Lalam., Resistance Spot Weldability of ThreeMetal Stack Dual Phase 600 Hot-dipped

Galvanized Steel, SAE technical paper, SAE,Detroit, Michigan, SAE 2007-01-1363.

11- B.H. Choi., D.H. Joo., and S.H. Song.,Observation and prediction of fatigue behavior

of spot welded joints with triple thin steelplates under tensile-shear loading, Int. J.

Fatigue, Vol.29, pp.20-627, 2007.

12- American Welding Society:"Recommended Practices for Test Methods for

Evaluating the Resistance Spot WeldingBehavior of Automotive Sheet Steel

Materials", ANSI/AWS/SAE/D8.9-97, 1997.

13- J. C. Feng., Y. R. Wang., and Z. D.Zhang., Nugget growth characteristic for

AZ31B magnesium alloy during resistancespot welding, Sci. Technol. Weld. Joining,

Vol. 11, pp.154-162, 2006.

14- M. Marya., K. Wang., L. G. Hector., andX. Gayden, Tensile-Shear Forces and Fracture

Modes in Single and Multiple Weld Specimensin Dual-Phase Steels, J. Manufact. Sci. Eng.,

Vol.128, pp. 287-298, 2006.

15- X. Sun., E. V. Stephens., R. W. Davies.,M. A. Khaleel., and D. J. Spinella., Effects of

fusion zone size on failure modes and staticstrength of aluminum resistance spot welds,

Weld. J., Vol.83, pp.88s-195s, 2004.

16- P. Marashi., M. Pouranvari., S.Amirabdollahian., A. Abedi., and M.

Goodarzi., Microstructure and FailureBehavior of Dissimilar Resistance Spot Welds

between Low Carbon Galvanized andAustenitic Stainless Steels, Mater. Sci Eng. A,

Vol.480, pp.175-180, 2008.